diff --git a/x64dbg.ts b/x64dbg.ts index 8c21309..7c37dd2 100644 --- a/x64dbg.ts +++ b/x64dbg.ts @@ -6431,7 +6431,7 @@ - + You can only set 4 hardware breakpoints @@ -7085,25 +7085,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8962,312 +8962,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9733,48 +9733,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_af_ZA.ts b/x64dbg_af_ZA.ts index bcef7ac..d21e49d 100644 --- a/x64dbg_af_ZA.ts +++ b/x64dbg_af_ZA.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ar_SA.ts b/x64dbg_ar_SA.ts index 4e7e9be..84669e6 100644 --- a/x64dbg_ar_SA.ts +++ b/x64dbg_ar_SA.ts @@ -6442,7 +6442,7 @@ - + You can only set 4 hardware breakpoints يمكنك فقط تعيين 4 نقاط توقف العتاد @@ -7104,25 +7104,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -9007,315 +9007,315 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) تعذر تعيين نقطة توقف العتاد %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! تعيين نقطة توقف العتاد في %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) تعذر حذف نقطة توقف العتاد %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) ??? (فشل GetFileNameFromHandle) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry نقطة بداية لخيط معالجة - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! وصلت إلى نقطة توقف النظام! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? يتطلب الملف القابل للتنفيذ الذي تحاول تصحيح الارتفاع. قم بإعادة تشغيل كمشرف؟ - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! توقف التنقيح! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9781,48 +9781,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! الكشف عن تسمية فارغة في السطر %d! - + Duplicate label "%s" detected on lines %d and %d! الكشف عن تسمية مكررة "%s" في السطر %d و %d! - - + + Invalid branch label "%s" detected on line %d! الكشف عن تسمية فرع غير صالحة "%s" في السطر %d! - + Script finished! - + Error executing command! خطأ في تنفيذ الأمر! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_bg_BG.ts b/x64dbg_bg_BG.ts index 91d234e..9afb54c 100644 --- a/x64dbg_bg_BG.ts +++ b/x64dbg_bg_BG.ts @@ -6431,7 +6431,7 @@ - + You can only set 4 hardware breakpoints @@ -7085,25 +7085,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8962,312 +8962,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9733,48 +9733,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_bs_BA.ts b/x64dbg_bs_BA.ts index cc5e40d..1be6fc4 100644 --- a/x64dbg_bs_BA.ts +++ b/x64dbg_bs_BA.ts @@ -6440,7 +6440,7 @@ Hex dugo dugo (64-bit) - + You can only set 4 hardware breakpoints @@ -7094,25 +7094,25 @@ Hex dugo dugo (64-bit) - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8971,312 +8971,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9742,48 +9742,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ca_ES.ts b/x64dbg_ca_ES.ts index 5e1e47a..1c923b2 100644 --- a/x64dbg_ca_ES.ts +++ b/x64dbg_ca_ES.ts @@ -6430,7 +6430,7 @@ - + You can only set 4 hardware breakpoints @@ -7084,25 +7084,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8961,312 +8961,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9732,48 +9732,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ceb_PH.ts b/x64dbg_ceb_PH.ts index 38174f1..32502b1 100644 --- a/x64dbg_ceb_PH.ts +++ b/x64dbg_ceb_PH.ts @@ -6430,7 +6430,7 @@ - + You can only set 4 hardware breakpoints @@ -7084,25 +7084,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8961,312 +8961,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9732,48 +9732,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_cs_CZ.ts b/x64dbg_cs_CZ.ts index a14970f..66ead8f 100644 --- a/x64dbg_cs_CZ.ts +++ b/x64dbg_cs_CZ.ts @@ -6450,7 +6450,7 @@ - + You can only set 4 hardware breakpoints @@ -7104,25 +7104,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8981,312 +8981,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9752,48 +9752,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_da_DK.ts b/x64dbg_da_DK.ts index 67e4207..84e801d 100644 --- a/x64dbg_da_DK.ts +++ b/x64dbg_da_DK.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_de_DE.ts b/x64dbg_de_DE.ts index 9bbd40b..10b00eb 100644 --- a/x64dbg_de_DE.ts +++ b/x64dbg_de_DE.ts @@ -6475,7 +6475,7 @@ - + You can only set 4 hardware breakpoints Sie können nur 4 Hardware Haltepunkte setzen @@ -7167,25 +7167,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process fehlgeschlagen! - + Use x32dbg to debug this process! Verwenden Sie x32dbg, um diesen Process zu debuggen! - + Use x64dbg to debug this process! Verwenden Sie x64dbg, um diesen Prozess zu debuggen! @@ -9159,344 +9159,344 @@ Ungültige Datenbank-Datei (JSON)! - + Error when evaluating break condition. Fehler bei der Bewertung der Break-Bedingung. - - + + Error when evaluating log condition. Fehler beim Auswerten der Log-Bedingung. - - + + Error when evaluating command condition. Fehler bei der Auswertung der Befehlsbedingung. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s Benutzercode erreicht bei %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Haltepunkt %p wurde deaktiviert, da die Bytes nicht übereinstimmen! Erwartet: %02X %02X, gefunden: %02X %02X - + Could not set breakpoint %p! (SetBPX) Haltepunkt %p konnte nicht gesetzt werden! (SetBPX) - + MemRead failed on breakpoint address %p! MemRead fehlgeschlagen bei Haltepunkt-addresse %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Speicher-Haltepunkt %p konnte nicht gesetzt werden! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Hardware-Haltepunkt %p konnte nicht gesetzt werden! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Hardwarebreakpoint bei %p gesetzt! - + Could not delete breakpoint %p! (DeleteBPX) Haltepunkt %p konnte nicht gelöscht werden! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Speicher-Haltepunkt konnte nicht gelöscht werden. %p (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Hardware-Haltepunkt-%p konnte nicht gelöscht werden! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Ablaufverfolgung beendet nach %llu Schritten! - + Trace finished after %u steps! Ablaufverfolgung beendet nach %u Schritten! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle fehlgeschlagen) - + Process Started: %p %s Prozess gestartet: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... %d ungültige TLS-callback-Adressen... - - + + entry breakpoint Haltepunkt beim Einsprungpunkt - + Process stopped with exit code %s Prozess gestoppt mit Exit-Code %s - + Thread %s created, Entry: %s, Parameter: %s Thread %s erstellt, Eintrag: %s, Parameter: %s - + Thread Entry Thread Einstieg - + Thread %s Stack Thread %s Stapel - + No threads left to switch to (bug?) Keine Threads übrig zum wechseln (Programmfehler?) - + Thread %s exit Thread %s beenden - + Error: Cannot load global initialization script. Fehler: Kann globales Initialisierungsskript nicht laden. - + Error: Cannot load debuggee initialization script. Fehler: Debuggee Initialisierungsskript kann nicht geladen werden. - + System breakpoint reached! System-Haltepunkt erreicht! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! Es wurde entdeckt dass der zu debuggende Einstiegspunkt im MZ Header der ausführbaren Datei liegt. Dies wird zu seltsamem Verhalten führen, weswegen der Systemhaltepunkt ungeachtet der Einstellungen aktiviert wurde. Sei vorsichtig! - - + + TLS Callback TLS Callback - + Waiting until ntdll.dll symbols are loaded... Warte bis ntdll.dll Symbole geladen sind... - + Set LdrpDebugFlags to 0x%08X successfully! LdrpDebugFlags erfolgreich auf 0x%08X gesetzt! - + Failed to write to LdrpDebugFlags Fehler beim Schreiben in LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! Symbol 'LdrpDebugFlags' nicht gefunden! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) LdrpDebugFlags konnte nicht gefunden werden (Symbole für ntdll.dll müssen geladen werden) - + DLL Loaded: %p %s DLL geladen: %p %s - + DLL Unloaded: %p %s DLL entladen: %p %s - + DebugString: "%s" DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") SetThreadName Ausnahme auf %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Erste Ausnahme[First chance exception] bei %p (%.8X, %s)! - + First chance exception on %p (%.8X)! Erste Ausnahme[First chance exception] bei %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Last chance exception [Ausnahme] bei %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Last chance exception [Ausnahme] bei %p (%.8X)! - + Attached to process! An Prozess angehängt! - + Error debugging DLL (failed to copy loader) Fehler beim Debuggen der DLL (Konnte Loader nicht Kopieren) - + Error debugging DLL (loaddll.exe not found) Fehler beim Debuggen der DLL (loaddll.exe nicht gefunden) - + The executable you are trying to debug requires elevation. Restart as admin? Die Ausführung der ausgewählten Datei erfordert Administratorrechte. Als Administrator neustarten? - + Elevation Elevation - + Error starting process (CreateProcess, %s)! Fehler beim Starten des Prozesses (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Debuggen beendet! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -10005,48 +10005,48 @@ Möchten Sie das Debuggen fortsetzen? Alle Module (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText fehlgeschlagen... - + Empty label detected on line %d! Leeres Label auf Zeile %d erkannt! - + Duplicate label "%s" detected on lines %d and %d! Doppeltes Label "%s" auf Zeilen %d und %d erkannt! - - + + Invalid branch label "%s" detected on line %d! Ungültiges Verzweigungslabel "%s" auf Zeile %d erkannt! - + Script finished! Skript ist abgeschlossen! - + Error executing command! Fehler beim Ausführen des Befehls! - + Debugger must be paused to run a script! Debugger muss angehalten werden, um ein Skript auszuführen! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Skript wird vom Benutzer beendet. diff --git a/x64dbg_el_GR.ts b/x64dbg_el_GR.ts index 339b124..f3ab1bc 100644 --- a/x64dbg_el_GR.ts +++ b/x64dbg_el_GR.ts @@ -6441,7 +6441,7 @@ - + You can only set 4 hardware breakpoints @@ -7095,25 +7095,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8972,312 +8972,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9743,48 +9743,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_es_ES.ts b/x64dbg_es_ES.ts index 2525094..ca7c7f1 100644 --- a/x64dbg_es_ES.ts +++ b/x64dbg_es_ES.ts @@ -6466,7 +6466,7 @@ - + You can only set 4 hardware breakpoints Solo puedes establecer 4 breakpoints de hardware @@ -7156,25 +7156,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process ha fallado - + Use x32dbg to debug this process! Utiliza x32dbg para depurar este proceso - + Use x64dbg to debug this process! Utiliza x64dbg para depurar este proceso @@ -9120,328 +9120,328 @@ El archivo de base de datos no es válido (JSON) - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X El breakpoint en %p se ha deshabilitado porque los bytes no coinciden. Esperado: %02X %02X, Encontrado: %02X %02X - + Could not set breakpoint %p! (SetBPX) No se ha podido establecer el breakpoint en %p (SetBPX) - + MemRead failed on breakpoint address %p! ¡MemRead falló en la dirección del punto de interrupción %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) No se ha podido establecer el breakpoint de memoria en %p (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) No se ha podido establecer el breakpoint de hardware en %p (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Breakpoint de hardware establecido en %p - + Could not delete breakpoint %p! (DeleteBPX) No se ha podido eliminar el breakpoint en %p (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) No se ha podido eliminar el breakpoint de memoria en %p (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) No se ha podido eliminar el breakpoint de hardware en %p (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Seguimiento terminado después de %llu pasos - + Trace finished after %u steps! Seguimiento terminado después de %u pasos - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle ha fallado) - + Process Started: %p %s Proceso iniciado: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... %d direcciones de TLS callback invalidas... - - + + entry breakpoint Punto de entrada - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry En el Entry de un hilo - + Thread %s Stack - + No threads left to switch to (bug?) No hay hilos a los que cambiar (¿un bug?) - + Thread %s exit - + Error: Cannot load global initialization script. Error: No se puede cargar el script global de inicio. - + Error: Cannot load debuggee initialization script. Error: No se puede cargar el script de inicio del depurador. - + System breakpoint reached! Alcanzado un breakpoint del sistema - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback Callback TLS - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s DLL cargada: %p %s - + DLL Unloaded: %p %s DLL descargada: %p %s - + DebugString: "%s" DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Excepción alcanzada (lanzamiento inicial) en %p (%.8X, %s) - + First chance exception on %p (%.8X)! Excepción alcanzada (lanzamiento inicial) en %p (%.8X) - + Last chance exception on %p (%.8X, %s)! Excepción alcanzada (última oportunidad) en %p (%.8X, %s) - + Last chance exception on %p (%.8X)! Excepción alcanzada (última oportunidad) en %p (%.8X) - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? El ejecutable que estás intentando depurar requiere privilegios. ¿Reiniciar como administrador? - + Elevation Elevación - + Error starting process (CreateProcess, %s)! Error al iniciar el proceso (CreateProcess, %s) - + Attach to process failed: %s - + Debugging stopped! Depuración detenida - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9925,48 +9925,48 @@ Do you want to continue debugging? Todos los módulos (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText ha fallado... - + Empty label detected on line %d! Se ha detectado una etiqueta vacía en la línea %d - + Duplicate label "%s" detected on lines %d and %d! Se ha detectado que la etiqueta "%s" está duplicada en las líneas %d and %d - - + + Invalid branch label "%s" detected on line %d! ¡Etiqueta inválida en la rama/salto "%s" en línea %d! - + Script finished! Script finalizado - + Error executing command! ¡Error al ejecutar el comando! - + Debugger must be paused to run a script! El depurador debe estar pausado para ejecutar un script - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Script finalizado por el usuario diff --git a/x64dbg_fa_IR.ts b/x64dbg_fa_IR.ts index de35ba0..41b745d 100644 --- a/x64dbg_fa_IR.ts +++ b/x64dbg_fa_IR.ts @@ -6468,7 +6468,7 @@ - + You can only set 4 hardware breakpoints You can only set 4 hardware breakpoints @@ -7160,25 +7160,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process failed! - + Use x32dbg to debug this process! Use x32dbg to debug this process! - + Use x64dbg to debug this process! Use x64dbg to debug this process! @@ -9143,340 +9143,340 @@ Invalid database file (JSON)! - + Error when evaluating break condition. Error when evaluating break condition. - - + + Error when evaluating log condition. Error when evaluating log condition. - - + + Error when evaluating command condition. Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Trace finished after %llu steps! - + Trace finished after %u steps! Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle failed) - + Process Started: %p %s Process Started: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... %d invalid TLS callback addresses... - - + + entry breakpoint entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. Error: Cannot load debuggee initialization script. - + System breakpoint reached! System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback TLS Callback - + Waiting until ntdll.dll symbols are loaded... Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s DLL Loaded: %p %s - + DLL Unloaded: %p %s DLL Unloaded: %p %s - + DebugString: "%s" DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Last chance exception on %p (%.8X)! - + Attached to process! Attached to process! - + Error debugging DLL (failed to copy loader) Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? The executable you are trying to debug requires elevation. Restart as admin? - + Elevation Elevation - + Error starting process (CreateProcess, %s)! Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9980,48 +9980,48 @@ Do you want to continue debugging? All Modules (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText failed... - + Empty label detected on line %d! Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! Invalid branch label "%s" detected on line %d! - + Script finished! Script finished! - + Error executing command! Error executing command! - + Debugger must be paused to run a script! Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Script is terminated by user. diff --git a/x64dbg_fi_FI.ts b/x64dbg_fi_FI.ts index 9c5d61a..dfbef34 100644 --- a/x64dbg_fi_FI.ts +++ b/x64dbg_fi_FI.ts @@ -6463,7 +6463,7 @@ - + You can only set 4 hardware breakpoints Kerralla voi asettaa korkeintaan 4 laitteistokeskeytyskohtaa @@ -7154,25 +7154,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process-komento epäonnistui! - + Use x32dbg to debug this process! Käytä x32dbg-ohjelmaa tutkiakseksi tätä prosessia! - + Use x64dbg to debug this process! Käytä x64dbg-ohjelmaa tutkiakseksi tätä prosessia! @@ -9133,333 +9133,333 @@ Tietokantatiedosto ei kelpaa (JSON)! - + Error when evaluating break condition. Virhe evaluoidessa keskeytysehtoa. - - + + Error when evaluating log condition. Virhe evaluoidessa lokiehtoa. - - + + Error when evaluating command condition. Virhe evaluoidessa komentoehtoa. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s Käyttäjäalueen koodi saavutettiin kohdassa %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Keskeytyskohta %p on poistettu käytöstä, koska tavut eivät täsmää! Odotettu arvo: %02X %02X, saatu arvo: %02X %02X - + Could not set breakpoint %p! (SetBPX) Keskeytyskohdan %p asettaminen epäonnistui! (SetBPX) - + MemRead failed on breakpoint address %p! MemRead-komento epäonnistui keskeytyskohdan osoitteessa %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Muistikeskeytyskohdan %p asettaminen epäonnistui! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Laitteistokeskeytyskohdan %p asettaminen epäonnistui! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Laitteistokeskeytyskohta asetettu kohtaan %p! - + Could not delete breakpoint %p! (DeleteBPX) Keskeytyskohdan %p poistaminen epäonnistui! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Muistikeskeytyskohdan %p poistaminen epäonnistui! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Laitteistokeskeytyskohdan %p poistaminen epäonnistui! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Suorituksen jäljitys päättyi %llu askeleen jälkeen! - + Trace finished after %u steps! Suorituksenjäljitys päättyi %u askeleen jälkeen! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle epäonnistui) - + Process Started: %p %s Prosessi käynnistyi: %p %s - + TLS Callback %d TLS-takaisunkutsu %d - - + + %d invalid TLS callback addresses... %d TLS-takaisinkutsuosoitetta ei kelpaa... - - + + entry breakpoint aloituskohdan keskeytyskohta - + Process stopped with exit code %s Prosessi pysähtyi tilakoodilla %s - + Thread %s created, Entry: %s, Parameter: %s Säie %s luotu, Aloituskohta: %s, Parametri: %s - + Thread Entry Säikeen aloituskohta - + Thread %s Stack Säikeen %s pino - + No threads left to switch to (bug?) Ei ole jäljellä yhtään säiettä, jolle vaihtaa (bugi?) - + Thread %s exit Säie %s poistui - + Error: Cannot load global initialization script. Virhe: Globaalin alustusskriptin lataaminen epäonnistui. - + Error: Cannot load debuggee initialization script. Virhe: Ohjelmakohtaisen alustusskriptin lataaminen epäonnistui. - + System breakpoint reached! Järjestelmäkeskeytyskohta saavutettu! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! Ilmeisesti tutkittavan ohjelman aloituskohta sijaitsee MZ-otsakkeessa. Tämä aiheuttaa outoja seuraamuksia, joten järjestelmäkeskeytyskohta on käytössä käyttäjän asetuksista huolimatta. Ole varovainen! - - + + TLS Callback TLS-takaisinkutsu - + Waiting until ntdll.dll symbols are loaded... Odotetaan, kunnes ntdll.dll-kirjaston symbolit on ladattu... - + Set LdrpDebugFlags to 0x%08X successfully! LdrpDebugFlags-liput asetettiin arvoon 0x%08X onnistuneesti! - + Failed to write to LdrpDebugFlags LdrpDebugFlags-lippujen kirjoitus epäonnistui - + Symbol 'LdrpDebugFlags' not found! Symbolia 'LdrpDebugFlags' ei löytynyt! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) LdrpDebugFlags-lippuja ei löytynyt (sinun on ladattava symbolit ntdll.dll-kirjastolle) - + DLL Loaded: %p %s DLL latautui: %p %s - + DLL Unloaded: %p %s DLL:n lataus poistui: %p %s - + DebugString: "%s" Virheenjäljitysmerkkijono: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Ensimmäisen tilaisuuden poikkeama kohdassa %p (%.8X, %s)! - + First chance exception on %p (%.8X)! Ensimmäisen tilaisuuden poikkeama kohdassa %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Viimeisen tilaisuuden poikkeama kohdassa %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Viimeisen tilaisuuden poikkeama kohdassa %p (%.8X)! - + Attached to process! Kytketty prosessiin! - + Error debugging DLL (failed to copy loader) Tapahtui virhe DLL:n virhejäljityksessä (latauskoodin kopiointi epäonnistui) - + Error debugging DLL (loaddll.exe not found) Tapahtui virhe DLL:n virhejäljityksessä (loaddll.exe-tiedostoa ei löytynyt) - + The executable you are trying to debug requires elevation. Restart as admin? Ohjelma, jota yrität tutkia, vaatii korotusta. Käynnistetäänkö uudelleen pääkäyttäjänä? - + Elevation Korotus - + Error starting process (CreateProcess, %s)! Virhe aloittaessa prosessia (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Virheenjäljitys lopetettu! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9966,48 +9966,48 @@ Haluatko jatkaa virheenjäljitystä? Kaikki moduulit (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllTEt epäonnistui... - + Empty label detected on line %d! Tyhjä nimike löytyi rivillä %d! - + Duplicate label "%s" detected on lines %d and %d! Kahdesti käytetty nimike "%s" löytyi riveiltä %d ja %d! - - + + Invalid branch label "%s" detected on line %d! Haaranimike "%s", joka löytyi riviltä %d, ei kelpaa! - + Script finished! Skripti päättyi! - + Error executing command! Virhe komennon suorituksessa! - + Debugger must be paused to run a script! Virheenjäljitys täytyy keskeyttää, jotta skripti voidaan suorittaa! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Käyttäjä pysäytti skriptin. diff --git a/x64dbg_fil_PH.ts b/x64dbg_fil_PH.ts index b17125a..7416d4e 100644 --- a/x64dbg_fil_PH.ts +++ b/x64dbg_fil_PH.ts @@ -6435,7 +6435,7 @@ - + You can only set 4 hardware breakpoints @@ -7089,25 +7089,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8966,312 +8966,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9737,48 +9737,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_fr_FR.ts b/x64dbg_fr_FR.ts index 52b0e83..82da426 100644 --- a/x64dbg_fr_FR.ts +++ b/x64dbg_fr_FR.ts @@ -6460,7 +6460,7 @@ - + You can only set 4 hardware breakpoints Vous ne pouvez définir que 4 points d'arrêt matériels @@ -7139,25 +7139,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -9043,312 +9043,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry Point d'entrée de Thread - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9814,48 +9814,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_he_IL.ts b/x64dbg_he_IL.ts index a93fdd1..25668a8 100644 --- a/x64dbg_he_IL.ts +++ b/x64dbg_he_IL.ts @@ -6431,7 +6431,7 @@ - + You can only set 4 hardware breakpoints @@ -7085,25 +7085,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process נכשל! - + Use x32dbg to debug this process! השתמש בx32dbg כדי לדבג את התהליך הזה! - + Use x64dbg to debug this process! @@ -8967,312 +8967,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle נכשל) - + Process Started: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) שגיאה בדיבוג DLL (נכשל בהעתקת הloader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9741,48 +9741,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! הדיבאגר מוכרח לעצור כדי להריץ סקריפט - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_hi_IN.ts b/x64dbg_hi_IN.ts index 691d832..75d7aa0 100644 --- a/x64dbg_hi_IN.ts +++ b/x64dbg_hi_IN.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_hu_HU.ts b/x64dbg_hu_HU.ts index 2d7e4b1..add1fa0 100644 --- a/x64dbg_hu_HU.ts +++ b/x64dbg_hu_HU.ts @@ -6432,7 +6432,7 @@ mrfearless - + You can only set 4 hardware breakpoints @@ -7086,25 +7086,25 @@ mrfearless - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8963,312 +8963,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9734,48 +9734,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_id_ID.ts b/x64dbg_id_ID.ts index 37fbbe8..f922c51 100644 --- a/x64dbg_id_ID.ts +++ b/x64dbg_id_ID.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_it_IT.ts b/x64dbg_it_IT.ts index 526eba9..69f7b37 100644 --- a/x64dbg_it_IT.ts +++ b/x64dbg_it_IT.ts @@ -6440,7 +6440,7 @@ - + You can only set 4 hardware breakpoints @@ -7098,25 +7098,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process fallito! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8981,312 +8981,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9752,48 +9752,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ja_JP.ts b/x64dbg_ja_JP.ts index 3494b25..d195c4c 100644 --- a/x64dbg_ja_JP.ts +++ b/x64dbg_ja_JP.ts @@ -6479,7 +6479,7 @@ - + You can only set 4 hardware breakpoints ハードウェア ブレークポイントは4つしか設定できません @@ -7174,25 +7174,25 @@ - + Process is already being debugged! プロセスは既にデバッグされています! - + IsWow64Process failed! IsWow64Process 失敗! - + Use x32dbg to debug this process! x32dbg を使用してこのプロセスをデバッグ! - + Use x64dbg to debug this process! x64dbg を使用してこのプロセスをデバッグ! @@ -9169,36 +9169,36 @@ Invalid database file (JSON)! - + Error when evaluating break condition. ブレーク条件の評価中にエラーが発生しました。 - - + + Error when evaluating log condition. ログ条件の評価中にエラーが発生しました。 - - + + Error when evaluating command condition. コマンド条件の評価中にエラーが発生しました。 - + Failed to open breakpoint log: %s (%s) ブレークポイント ログを開けませんでした: %s (%s) - + User code reached at %s ユーザー コードが %s に到達しました - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X ブレークポイント %p はバイトが一致しないため無効になっています! 期待値: %02X %02X, @@ -9206,310 +9206,310 @@ Invalid database file (JSON)! - + Could not set breakpoint %p! (SetBPX) ブレークポイント %p を設定できませんでした! (SetBPX) - + MemRead failed on breakpoint address %p! ブレークポイント アドレス %p でMemRead が失敗しました! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) メモリ ブレークポイント %p を設定できませんでした! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) ハードウェア ブレークポイント %p を設定できませんでした! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! ハードウェア ブレークポイントを %p に設定! - + Could not delete breakpoint %p! (DeleteBPX) ブレークポイント %p を削除できませんでした! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) メモリ ブレークポイント %p を削除できませんでした! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) ハードウェア ブレークポイント %p を削除できませんでした! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! %llu ステップの後にトレースが終了しました! - + Trace finished after %u steps! %u ステップの後にトレースが終了しました! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle 失敗) - + Process Started: %p %s プロセスを開始しました : %p %s - + TLS Callback %d TLS コールバック %d - - + + %d invalid TLS callback addresses... %d 無効な TLS コールバック アドレス... - - + + entry breakpoint エントリ ブレークポイント - + Process stopped with exit code %s プロセスは終了コード %s で停止しました - + Thread %s created, Entry: %s, Parameter: %s スレッド %s が作成されました。エントリ: %s、パラメータ: %s - + Thread Entry スレッドのエントリーポイント - + Thread %s Stack スレッド %s スタック - + No threads left to switch to (bug?) 切り替えるスレッドが残っていません (バグ?) - + Thread %s exit スレッド %s 終了 - + Error: Cannot load global initialization script. エラー : グローバル初期化スクリプトを読み込めません。 - + Error: Cannot load debuggee initialization script. エラー : デバッグ対象の初期化スクリプトをロードできません。 - + System breakpoint reached! システム ブレークポイントに達しました! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! デバッグ対象のエントリ ポイントが実行可能ファイルの MZ ヘッダーにあることが検出されました。これにより異常な動作が発生するため、設定に関係なくシステム ブレークポイントが有効になっています。注意してください! - - + + TLS Callback TLS コールバック - + Waiting until ntdll.dll symbols are loaded... ntdll.dllシンボルがロードされるまで待機しています... - + Set LdrpDebugFlags to 0x%08X successfully! LdrpDebugFlags を 0x%08X に設定しました! - + Failed to write to LdrpDebugFlags LdrpDebugFlags への書き込みに失敗 - + Symbol 'LdrpDebugFlags' not found! シンボル 'LdrpDebugFlags' が見つかりません! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) LdrpDebugFlags が見つかりませんでした (ntdll.dllのシンボルをロードする必要があります) - + DLL Loaded: %p %s DLL 読み込み : %p %s - + DLL Unloaded: %p %s DLL アンロード : %p %s - + DebugString: "%s" デバッグ文字列 : "%s" - + SetThreadName exception on %p (%X, "%s") %p (%X, "%s") で SetThreadName 例外 - + First chance exception on %p (%.8X, %s)! %p (%.8X, %s) で ファーストチャンス 例外! - + First chance exception on %p (%.8X)! %p (%.8X) で ファーストチャンス 例外! - + Last chance exception on %p (%.8X, %s)! %p (%.8X, %s) で ラストチャンス 例外! - + Last chance exception on %p (%.8X)! %p (%.8X) で ラストチャンス 例外! - + Attached to process! プロセスをアタッチしました! - + Error debugging DLL (failed to copy loader) DLL のデバッグ エラー (ローダーのコピーに失敗しました) - + Error debugging DLL (loaddll.exe not found) DLL のデバッグ エラー (loaddll.exe が見つかりません) - + The executable you are trying to debug requires elevation. Restart as admin? デバッグしようとしている実行可能ファイルには昇格が必要です。管理者として再起動しますか? - + Elevation 昇格 - + Error starting process (CreateProcess, %s)! プロセス開始時にエラーが発生しました(CreateProcess, %s)! - + Attach to process failed: %s プロセスのアタッチに失敗しました: %s5 - + Debugging stopped! デバッグが停止しました! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -10023,48 +10023,48 @@ Do you want to continue debugging? すべてのモジュール (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText 失敗... - + Empty label detected on line %d! 行 %d に空のラベルが検出されました! - + Duplicate label "%s" detected on lines %d and %d! 重複ラベル "%s" が行 %d と %dで検出されました! - - + + Invalid branch label "%s" detected on line %d! 無効なブランチ ラベル "%s" が検出されました(行 %d)! - + Script finished! スクリプトが終了しました! - + Error executing command! コマンド実行中のエラー! - + Debugger must be paused to run a script! スクリプトを実行するにはデバッガーを一時停止する必要があります! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. スクリプトはユーザーによって強制終了されました。 diff --git a/x64dbg_ka_GE.ts b/x64dbg_ka_GE.ts index c584ff7..76db57f 100644 --- a/x64dbg_ka_GE.ts +++ b/x64dbg_ka_GE.ts @@ -6430,7 +6430,7 @@ - + You can only set 4 hardware breakpoints @@ -7084,25 +7084,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8961,312 +8961,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9732,48 +9732,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ko_KR.ts b/x64dbg_ko_KR.ts index 1345426..9cfc285 100644 --- a/x64dbg_ko_KR.ts +++ b/x64dbg_ko_KR.ts @@ -6467,7 +6467,7 @@ - + You can only set 4 hardware breakpoints 4개의 하드웨어 중단점만 설정하실 수 있습니다 @@ -7159,25 +7159,25 @@ - + Process is already being debugged! 프로세스가 이미 디버그되었습니다! - + IsWow64Process failed! IsWow64Process 실패! - + Use x32dbg to debug this process! 이 프로세스를 디버깅하기 위해서 x32dbg를 사용합니다! - + Use x64dbg to debug this process! 이 프로세스를 디버깅하기 위해서 x64dbg를 사용합니다! @@ -9136,63 +9136,63 @@ x64dbg를 관리자권한으로 실행해주세요. - + Error when evaluating break condition. 중단 조건을 처리하는 동안 에러가 발생했습니다. - - + + Error when evaluating log condition. 로그 조건을 처리하는 동안 에러가 발생했습니다. - - + + Error when evaluating command condition. 명령어 조건을 처리하는 동안 에러가 발생했습니다. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s 사용자 코드가 %s에 도달했습니다 - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X 바이트가 일치하지 않아서 중단점 %p 가 비활성화되었습니다! 예상값: %02X %02X, 발견값: %02X %02X - + Could not set breakpoint %p! (SetBPX) 중단점 %p (SetBPX) 를 설정할 수 없습니다! - + MemRead failed on breakpoint address %p! 중단점 주소%p에서 메모리를 읽지 못했습니다! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) 메모리 중단점 %p (SetMemoryBPXEx) 를 설정할 수 없습니다! - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) 하드웨어 중단점 %p 를 설정할 수 없습니다! @@ -9200,28 +9200,28 @@ x64dbg를 관리자권한으로 실행해주세요. - + Set hardware breakpoint on %p! %p에 하드웨어 중단점 설정! - + Could not delete breakpoint %p! (DeleteBPX) 중단점 %p (DeleteBPX) 를 제거할 수 없음 - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) 메모리 중단점 %p (RemoveMemoryBPX) 를 제거할 수 없음 - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) 하드웨어 중단점 %p 를 제거할 수 없음! @@ -9229,243 +9229,243 @@ x64dbg를 관리자권한으로 실행해주세요. - + Trace finished after %llu steps! %llu 단계 후에 추적 완료! - + Trace finished after %u steps! %u 단계 후에 추적 완료! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle 실패) - + Process Started: %p %s 프로세스 시작함: %p %s - + TLS Callback %d TLS 콜백 %d - - + + %d invalid TLS callback addresses... %d 잘못 된 TLS 콜백 주소... - - + + entry breakpoint 진입점 중단점 - + Process stopped with exit code %s 종료 코드 %s로 프로세스가 중단되었습니다 - + Thread %s created, Entry: %s, Parameter: %s 스레드 %s가 생성되었습니다. 진입점: %s, 매개변수: %s - + Thread Entry 스레드 진입점 - + Thread %s Stack 스레드 %s 스택 - + No threads left to switch to (bug?) 전환할 스레드가 남아있지 않습니다 (버그?) - + Thread %s exit 스레드 %s 종료 - + Error: Cannot load global initialization script. 오류: 글로벌 초기화 스크립트를 로드할 수 없습니다. - + Error: Cannot load debuggee initialization script. 오류: 디버기 초기화 스크립트를 로드할 수 없습니다. - + System breakpoint reached! 시스템 중단점에 도달함! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! 디버그 대상의 진입점이 실행 파일의 MZ 헤더에 있습니다. 이는 예기치 못한 동작이 발생할 수 있으므로 시스템 중단점이 설정되었습니다. 주의하세요! - - + + TLS Callback TLS 콜백 - + Waiting until ntdll.dll symbols are loaded... ntdll.dll 심볼이 로드될 때까지 기다리세요... - + Set LdrpDebugFlags to 0x%08X successfully! LdrpDebugFlags를 0x%08X로 설정하는 것을 성공했습니다! - + Failed to write to LdrpDebugFlags LdrpDebugFlags를 쓰는데 실패했습니다. - + Symbol 'LdrpDebugFlags' not found! 심볼 'LdrpDebugFlags'이 존재하지 않습니다! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) LdrpDebugFlags를 찾는 것을 실패했습니다 (ntdll.dll 심볼을 로드해야 합니다) - + DLL Loaded: %p %s DLL 로드: %p %s - + DLL Unloaded: %p %s DLL 언로드: %p %s - + DebugString: "%s" 디버그 문자열: "%s" - + SetThreadName exception on %p (%X, "%s") %p (%X, "%s")에서 SetThreadName 예외가 발생했습니다 - + First chance exception on %p (%.8X, %s)! %p (%.8X, %s)에서 첫번째 예외발생! - + First chance exception on %p (%.8X)! %p (%.8X)에서 첫번째 예외발생! - + Last chance exception on %p (%.8X, %s)! %p (%.8X, %s)에서 마지막 예외발생! - + Last chance exception on %p (%.8X)! %p (%.8X)에서 마지막 예외발생! - + Attached to process! 프로세스에 연결되었습니다! - + Error debugging DLL (failed to copy loader) 디버깅 DLL 에러 (로더를 복사하는데 실패) - + Error debugging DLL (loaddll.exe not found) 디버깅 DLL 에러 (loaddll.exe가 발견되지 않음) - + The executable you are trying to debug requires elevation. Restart as admin? 디버깅하려는 실행 프로그램에 권한상승이 필요합니다. 관리자로 다시 시작하겠습니까? - + Elevation 권한 상승 - + Error starting process (CreateProcess, %s)! 프로세스 시작 오류 (CreateProcess, %s)! - + Attach to process failed: %s 프로세스에 연결하는데 실패했습니다: %s - + Debugging stopped! 디버깅 중지됨! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9950,48 +9950,48 @@ Do you want to continue debugging? 모든 모듈 (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText 실패... - + Empty label detected on line %d! 빈 레이블을 라인 %d에서 발견함! - + Duplicate label "%s" detected on lines %d and %d! 중복된 레이블 "%s"을 라인 %d 과 %d에서 발견함! - - + + Invalid branch label "%s" detected on line %d! 에서 잘못 된 분기 레이블 "%s"을 발견함라인 %d! - + Script finished! 스크립트 완료! - + Error executing command! 명령 실행 오류! - + Debugger must be paused to run a script! 스크립트를 실행하려면 디버거를 일시중지해야 합니다! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. 스크립트가 사용자에 의해 종료되었습니다. diff --git a/x64dbg_lt_LT.ts b/x64dbg_lt_LT.ts index 229ee3c..ab6670b 100644 --- a/x64dbg_lt_LT.ts +++ b/x64dbg_lt_LT.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_nl_NL.ts b/x64dbg_nl_NL.ts index 5d120e8..557f776 100644 --- a/x64dbg_nl_NL.ts +++ b/x64dbg_nl_NL.ts @@ -6464,7 +6464,7 @@ - + You can only set 4 hardware breakpoints U kunt maximaal 4 hardware breekpunten instellen @@ -7155,25 +7155,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process is mislukt! - + Use x32dbg to debug this process! Gebruik x32dbg om dit proces te debuggen! - + Use x64dbg to debug this process! Gebruik x64dbg om dit proces te debuggen! @@ -9127,332 +9127,332 @@ Ongeldig database bestand (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Breekpunt %p is uitgeschakeld omdat de bytes niet overeenkomen! Verwacht: %02X %02X, Gevonden: %02X %02X - + Could not set breakpoint %p! (SetBPX) Breekpunt %p instellen is mislukt! SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Geheugen breekpunt %p instellen is mislukt! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Hardware breekpunt %p instellen is mislukt (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Hardware breekpunt ingeschakeld op %p! - + Could not delete breakpoint %p! (DeleteBPX) Breekpunt %p verwijderen is mislukt! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Breekpunt %p verwijderen is mislukt! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Hardware breekpunt %p verwijderen is mislukt (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Trace voltooid na %llu stappen! - + Trace finished after %u steps! Trace voltooid na %u stappen! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle is mislukt) - + Process Started: %p %s Proces gestart: %p %s - + TLS Callback %d TLS terugbeller %d - - + + %d invalid TLS callback addresses... %d ongeldige TLS terugbel adressen... - - + + entry breakpoint entree breekpunt - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry Thread Entree - + Thread %s Stack - + No threads left to switch to (bug?) Geen Threads meer om naar over te stappen (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. Fout: Het globale initialisatie script kan niet geladen worden. - + Error: Cannot load debuggee initialization script. Fout: Kan debuggee initialisatie script niet laden. - + System breakpoint reached! Systeem breekpunt bereikt! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback TLS Terugbeller - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s DLL Ingeladen: %p %s - + DLL Unloaded: %p %s DLL Uitgeladen: %p %s - + DebugString: "%s" DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Eerste kans exceptie op %p (%.8X, %s)! - + First chance exception on %p (%.8X)! Eerste kans exceptie op %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Laatste kans exceptie op %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Laatste kans exceptie op %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? Het uitvoerbare bestand dat u probeert te debuggen vergt verhoogde rechten. Herstarten als beheerder? - + Elevation Verhoogde Rechten - + Error starting process (CreateProcess, %s)! Fout bij starten van proces (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Debugging is gestopt! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9932,48 +9932,48 @@ Do you want to continue debugging? Alle Modules (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText is mislukt... - + Empty label detected on line %d! Leeg label gedetecteerd op regel %d! - + Duplicate label "%s" detected on lines %d and %d! Duplicaat label "%s" ontdekt op regels %d en %d! - - + + Invalid branch label "%s" detected on line %d! Ongeldige vertakkingslabel "%s" gedetecteerd op regel %d! - + Script finished! Script is afgerond! - + Error executing command! Fout bij het uitvoeren van de opdracht! - + Debugger must be paused to run a script! De Debugger moet worden gepauzeerd voor het uitvoeren van een script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Script is beëindigd door gebruiker. diff --git a/x64dbg_no_NO.ts b/x64dbg_no_NO.ts index 6e23563..3f1fbdd 100644 --- a/x64dbg_no_NO.ts +++ b/x64dbg_no_NO.ts @@ -6431,7 +6431,7 @@ - + You can only set 4 hardware breakpoints @@ -7085,25 +7085,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8962,312 +8962,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9733,48 +9733,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_pl_PL.ts b/x64dbg_pl_PL.ts index 3836c0e..38ff42a 100644 --- a/x64dbg_pl_PL.ts +++ b/x64dbg_pl_PL.ts @@ -6456,7 +6456,7 @@ - + You can only set 4 hardware breakpoints Możesz ustawić tylko 4 przerwania sprzętowe @@ -7131,25 +7131,25 @@ - + Process is already being debugged! - + IsWow64Process failed! Niepowodzenie IsWow64Process! - + Use x32dbg to debug this process! Użyj x32dbg żeby debugować ten proces! - + Use x64dbg to debug this process! Użyj x64dbg żeby debugować ten proces! @@ -9060,319 +9060,319 @@ Nieprawidłowy plik bazy danych (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) Nie można ustawić przerwania %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Ustaw przerwanie sprzętowe na %p! - + Could not delete breakpoint %p! (DeleteBPX) Nie można usunąć przerwania %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle nie powiodło się) - + Process Started: %p %s Proces rozpoczęty: %p %s - + TLS Callback %d Wywołanie zwrotne TLS: %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint przerwanie na wejściu - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry Wejście do wątku - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! Osiągnięto przerwanie systemowe! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s Załadowano DLL: %p %s - + DLL Unloaded: %p %s DLL Wyładowana: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! Błąd podczas uruchamiania procesu (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Zatrzymano debugowanie! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9849,48 +9849,48 @@ Do you want to continue debugging? Wszystkie moduły (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText nie powiodło się... - + Empty label detected on line %d! Wykryto pustą etykietę w linii %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! Nieprawidłowa etykieta skoku "%s" wykryta w linii %d! - + Script finished! Skrypt zakończony! - + Error executing command! Błąd wykonywania komendy! - + Debugger must be paused to run a script! Debuger musi zostać wstrzymany, aby uruchomić skrypt! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Skrypt jest zakończony przez użytkownika. diff --git a/x64dbg_pt_BR.ts b/x64dbg_pt_BR.ts index 8a2f34c..92cb4f9 100644 --- a/x64dbg_pt_BR.ts +++ b/x64dbg_pt_BR.ts @@ -6467,7 +6467,7 @@ - + You can only set 4 hardware breakpoints Você só pode definir 4 breakpoints de hardware @@ -7150,25 +7150,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process falhou! - + Use x32dbg to debug this process! Use x32dbg para depurar esse processo! - + Use x64dbg to debug this process! Use x64dbg para depurar esse processo! @@ -9058,324 +9058,324 @@ Arquivo de banco de dados inválido(JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Ponto de interrupção %p foi desativado pois os bytes não se correspondem! Esperado: %02X %02X, Encontrado: %02X %02X - + Could not set breakpoint %p! (SetBPX) Não foi possível configurar o ponto de interrupção %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Não foi possível configurar o ponto de interrupção de memória %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Definir ponto de interrupção de hardware em %p! - + Could not delete breakpoint %p! (DeleteBPX) Não foi possível excluir o ponto de interrupção %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Não foi possível excluir o ponto de interrupção de memória %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Não foi possível excluir o ponto de interrupção de hardware %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s Processo iniciado: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! Ponto de interrupção de sistema atingido! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s DLL carregada: %p %s - + DLL Unloaded: %p %s DLL Descarregada: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Exceção de primeira chance em %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation Elevação - + Error starting process (CreateProcess, %s)! Erro ao iniciar processo (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Depuração interrompida! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9845,48 +9845,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! Script finalizado! - + Error executing command! Erro executando comando! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Script finalizado pelo usuário. diff --git a/x64dbg_pt_PT.ts b/x64dbg_pt_PT.ts index eabd846..2f5b726 100644 --- a/x64dbg_pt_PT.ts +++ b/x64dbg_pt_PT.ts @@ -6430,7 +6430,7 @@ - + You can only set 4 hardware breakpoints @@ -7084,25 +7084,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8961,312 +8961,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9732,48 +9732,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ro_RO.ts b/x64dbg_ro_RO.ts index 8b93ede..cedd99c 100644 --- a/x64dbg_ro_RO.ts +++ b/x64dbg_ro_RO.ts @@ -6430,7 +6430,7 @@ - + You can only set 4 hardware breakpoints @@ -7084,25 +7084,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8961,312 +8961,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9732,48 +9732,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_ru_RU.ts b/x64dbg_ru_RU.ts index 10c7742..ee50d7c 100644 --- a/x64dbg_ru_RU.ts +++ b/x64dbg_ru_RU.ts @@ -6471,7 +6471,7 @@ - + You can only set 4 hardware breakpoints Можно задать только 4 аппаратные точки останова @@ -7163,25 +7163,25 @@ - + Process is already being debugged! Процесс уже находится в отладке! - + IsWow64Process failed! Сбой IsWow64Process! - + Use x32dbg to debug this process! Для отладки этого процесса используйте x32dbg! - + Use x64dbg to debug this process! Для отладки этого процесса используйте x64dbg! @@ -9149,342 +9149,342 @@ Invalid database file (JSON)! - + Error when evaluating break condition. Ошибка при вычисленияя условия прерывания. - - + + Error when evaluating log condition. Ошибка при оценке состояния журнала. - - + + Error when evaluating command condition. Ошибка при вычислении условия "command". - + Failed to open breakpoint log: %s (%s) Не удалось открыть журнал точки останова: %s (%s) - + User code reached at %s Код пользователя достигнут в %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Точка останова %p была отключена, так как байты не совпадают! Ожидается: %02X %02X, получено: %02X %02X - + Could not set breakpoint %p! (SetBPX) Не удалось установить точку останова %p! (SetBPX) - + MemRead failed on breakpoint address %p! Ошибка MemRead на точке останова по адресу %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Не удалось установить точку останова на память %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Не удалось установить аппаратную точку останова %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Установите аппаратную точку останова на %p! - + Could not delete breakpoint %p! (DeleteBPX) Не удалось удалить точку останова %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Не удалось удалить точку останова по данным %p! (DeleteBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Не удалось удалить аппаратную точку останова %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Трассировка завершена за %llu шагов! - + Trace finished after %u steps! Трассировка завершена за %u шагов! - - + + ??? (GetFileNameFromHandle failed) ??? (сбой GetFileNameFromHandle) - + Process Started: %p %s Процесс запущен: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... %d недопустимые адреса TLS callback... - - + + entry breakpoint останов в точке входа - + Process stopped with exit code %s Процесс остановлен с кодом выхода %s - + Thread %s created, Entry: %s, Parameter: %s Поток %s создан, Точка входа: %s, Параметр: %s - + Thread Entry Точке входа потока - + Thread %s Stack Стек потока %s - + No threads left to switch to (bug?) Не осталось потоков, на которые можно переключиться (баг?) - + Thread %s exit Поток %s завершен - + Error: Cannot load global initialization script. Ошибка: Не удается загрузить глобальный сценарий инициализации. - + Error: Cannot load debuggee initialization script. Ошибка: Не удается загрузить сценарий инициализации отладки. - + System breakpoint reached! Достигнута системная точка останова! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! Обнаружено, что точка входа в отлаживаемом модуле находится в заголовке MZ исполняемого файла. Это приведет к странному поведению, поэтому системная точка останова была включена независимо от вашей настройки. Будьте осторожны! - - + + TLS Callback TLS Callback - + Waiting until ntdll.dll symbols are loaded... Подождите пока загрузятся символы ntdll.dll... - + Set LdrpDebugFlags to 0x%08X successfully! LdrpDebugFlags успешно установлено в 0x%08X! - + Failed to write to LdrpDebugFlags Не удалось записать в LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! Символ 'LdrpDebugFlags' не найден! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) Не удалось найти LdrpDebugFlags (Вам нужно загрузить отладочные символы для ntdll.dll) - + DLL Loaded: %p %s DLL загружена: %p %s - + DLL Unloaded: %p %s DLL выгружена: %p %s - + DebugString: "%s" Строка отладки: «%s» - + SetThreadName exception on %p (%X, "%s") Исключение SetThreadName на %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Первая попытка исключения на %p (%.8X, %s)! - + First chance exception on %p (%.8X)! Первая попытка исключения на %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Последняя попытка исключения на %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Последняя попытка исключения на %p (%.8X)! - + Attached to process! Присоединиться к процессу! - + Error debugging DLL (failed to copy loader) Ошибка отладки DLL (ошибка копирования загрузчика) - + Error debugging DLL (loaddll.exe not found) Ошибка отладки DLL (не найден loaddll.exe) - + The executable you are trying to debug requires elevation. Restart as admin? Для отладки исполняемого файла требуется повышение привилегий. Перезапустить с правами администратора? - + Elevation Повышение - + Error starting process (CreateProcess, %s)! Ошибка запуска процесса (CreateProcess, %s)! - + Attach to process failed: %s Не удалось присоединиться к процессу: %s - + Debugging stopped! Отладка остановлена! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9991,48 +9991,48 @@ Do you want to continue debugging? Все модули (%s) - + FileHelper::ReadAllText failed... Сбой FileHelper::ReadAllText... - + Empty label detected on line %d! Обнаружена пустая метка в строке %d! - + Duplicate label "%s" detected on lines %d and %d! Обнаружено дублирование метки "%s" в строках %d и %d! - - + + Invalid branch label "%s" detected on line %d! В обнаружена недопустимая метка ветви "%s" строке %d! - + Script finished! Скрипт завершён! - + Error executing command! Ошибка выполнения команды! - + Debugger must be paused to run a script! Для запуска скрипта отладчик должен быть приостановлен! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Скрипт завершен пользователем. diff --git a/x64dbg_si_LK.ts b/x64dbg_si_LK.ts index 22ce788..d685046 100644 --- a/x64dbg_si_LK.ts +++ b/x64dbg_si_LK.ts @@ -6480,7 +6480,7 @@ - + You can only set 4 hardware breakpoints ඔබට සකස් කළ හැක්කේ දෘඩාංග බිඳවැටීම් 4 ක් පමණි @@ -7175,25 +7175,25 @@ - + Process is already being debugged! ක්‍රියාවලිය දැනටමත් නිදොස් කරමින් පවතී! - + IsWow64Process failed! IsW64ක්රියාවලිය අසාර්ථකයි! - + Use x32dbg to debug this process! මෙම ක්රියාවලිය නිදොස් කිරීමට x32dbg භාවිතා කරන්න! - + Use x64dbg to debug this process! මෙම ක්රියාවලිය නිදොස් කිරීමට x64dbg භාවිතා කරන්න! @@ -9165,346 +9165,346 @@ Invalid database file (JSON)! - + Error when evaluating break condition. විවේකයක් තත්ත්වය ඇගයීමේදී දෝෂයක්. - - + + Error when evaluating log condition. ලඝු-සටහන තත්ත්වය ඇගයීමේදී දෝෂයක්. - - + + Error when evaluating command condition. විධාන තත්ත්වය ඇගයීමේදී දෝෂය. - + Failed to open breakpoint log: %s (%s) බිඳුම් ලක්ෂ්‍ය ලොගය විවෘත කිරීමට අපොහොසත් විය: %s (%s) - + User code reached at %s පරිශීලක කේතය %s ට ළඟා විය! - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X බයිට් නොගැලපෙන නිසා බ්රේක්පොයින්ට් %p අක්රීය කර ඇත! අපේක්ෂිත: %02X %02X, සොයා: %02X %02X - + Could not set breakpoint %p! (SetBPX) බ්රේක්පොයින්ට් %pසැකසිය නොහැක! (SetBPX) - + MemRead failed on breakpoint address %p! MEMRED බිඳවැටීම් ලිපිනය මත අසමත් විය %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) මතක බිඳීමේ ලක්ෂ්යය %pසැකසිය නොහැක! (SetMemoryBPXex) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) දෘඪාංග කඩන %pසැකසිය නොහැකි විය! (සෙතර්ඩ්වෙයාර් බ්රේක්පොයින්ට්) - + Set hardware breakpoint on %p! %pමත දෘඩාංග බිඳවැටීමක් සකසන්න! - + Could not delete breakpoint %p! (DeleteBPX) බිඳවැටීම් %pමකා දැමිය නොහැක! (Deleteබීපීඑක්ස්) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) මතක බිඳීමේ ලක්ෂ්යය මකා දැමිය නොහැක %p! (ඉවත් කිරීමේ මොරිබීපීඑක්ස්) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) දෘඩාංග බිඳවැටීම් %pමකා දැමිය නොහැක! (Deleteහාඩ්වෙයාර් බ්රේක්පොයින්ට්) - + Trace finished after %llu steps! පියවර %llu කට පසු අවසන් හෝඩුවාවක්! - + Trace finished after %u steps! පියවර %u කට පසු අවසන් හෝඩුවාවක්! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNamefromHandle අසමත් විය) - + Process Started: %p %s ක්රියාවලිය ආරම්භ විය: %p %s - + TLS Callback %d ටීඑල්එස් ඇමතුම %d - - + + %d invalid TLS callback addresses... %d වලංගු නොවන TLS ඇමතුම් ලිපින... - - + + entry breakpoint පිවිසුම් බිඳවැටීමක් - + Process stopped with exit code %s පිටවීමේ කේතය %s සමඟ ක්රියාවලිය නතර විය - + Thread %s created, Entry: %s, Parameter: %s %s නූල නිර්මාණය කරන ලදී, ඇතුළත් කිරීම: %s, පරාමිතිය: %s - + Thread Entry නූල් සටහන් - + Thread %s Stack නූල් %s තොගය - + No threads left to switch to (bug?) මාරු කිරීමට ඉතිරි නූල් නැත (දෝෂ?) - + Thread %s exit නූල %s පිටවීම - + Error: Cannot load global initialization script. දෝෂය: ගෝලීය ආරම්භකරණ තිර රචනය පූරණය කළ නොහැක. - + Error: Cannot load debuggee initialization script. දෝෂය: debuggee ආරම්භකරණ තිර රචනය පූරණය කළ නොහැක. - + System breakpoint reached! පද්ධති බිඳවැටීමක් ළඟා විය! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! එය debuggee පිවිසුම් ස්ථානය ක්රියාත්මක කළ හැකි MZ ශීර්ෂයේ ඇති බව අනාවරණය වී ඇත. මෙය අමුතු හැසිරීමක් ඇති කරනු ඇත, එබැවින් ඔබේ සැකසුම නොසලකා පද්ධතිය බිඳ වැටීමක් සක්රීය කර ඇත. ප්රවේශම් වන්න! - - + + TLS Callback ටීඑල්එස් ඇමතුම - + Waiting until ntdll.dll symbols are loaded... ntdll.dll සංකේත පටවන තෙක් බලා සිටීම... - + Set LdrpDebugFlags to 0x%08X successfully! LDRPDEbugකොඩි 0x%08X සාර්ථකව සකසන්න! - + Failed to write to LdrpDebugFlags LDRPDEbugකොඩි වෙත ලිවීමට අසමත් විය - + Symbol 'LdrpDebugFlags' not found! සංකේත 'LDRPDEbugකොඩි' සොයාගත නොහැක! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) LDRPDEbugකොඩි සොයා ගැනීමට අසමත් විය (ඔබට ntdll.dll සඳහා සංකේත පැටවිය යුතුය) - + DLL Loaded: %p %s ඩීඑල්එල් ලෝඩඩ්: %p %s - + DLL Unloaded: %p %s ඩීඑල්එල් බෑම: %p %s - + DebugString: "%s" නිදොස් කිරීම: "%s" - + SetThreadName exception on %p (%X, "%s") %p (%X, "%s") මත SetThreadName ව්‍යතිරේකය - + First chance exception on %p (%.8X, %s)! %p (%.8X, %s) මත පළමු අවස්ථාව ව්යතිරේකය! - + First chance exception on %p (%.8X)! %p (%.8X) මත පළමු අවස්ථාව ව්යතිරේකය! - + Last chance exception on %p (%.8X, %s)! %p (%.8X, %s) මත අවසාන අවස්ථාව ව්යතිරේකය! - + Last chance exception on %p (%.8X)! %p (%.8X) මත අවසාන අවස්ථාව ව්යතිරේකය! - + Attached to process! ක්රියාවලියට අමුණා ඇත! - + Error debugging DLL (failed to copy loader) DLL නිදොස්කරණය දෝෂ (කාරකය පිටපත් කිරීමට අසමත් විය) - + Error debugging DLL (loaddll.exe not found) DLL නිදොස්කරණය දෝෂ (loaddll.exe සොයාගත නොහැක) - + The executable you are trying to debug requires elevation. Restart as admin? ඔබ නිදොස් කිරීමට උත්සාහ කරන ක්රියාත්මක කළ හැකි උන්නතාංශය අවශ්ය වේ. පරිපාලක ලෙස නැවත ආරම්භ කරන්න? - + Elevation උන්නතාංශය - + Error starting process (CreateProcess, %s)! දෝෂ ආරම්භක ක්රියාවලිය (CreateProcess, %s)! - + Attach to process failed: %s ක්‍රියාවලියට ඇමිණීම අසාර්ථක විය: %s - + Debugging stopped! නිදොස්කරණය නැවැත්වුවා! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -10017,48 +10017,48 @@ Do you want to continue debugging? සියලු මොඩියුල (%s) - + FileHelper::ReadAllText failed... FileHELPER። කියවීමපෙළ අසමත් විය... - + Empty label detected on line %d! රේඛාව මත අනාවරණය හිස් ලේබලය %d! - + Duplicate label "%s" detected on lines %d and %d! අනුපිටපත් ලේබලය "%s" %d සහ %dරේඛාවල අනාවරණය වී ඇත! - - + + Invalid branch label "%s" detected on line %d! "%s" ශාඛා ලේබලය %dමාර්ගයෙන් අනාවරණය විය! - + Script finished! තිර රචනය අවසන්! - + Error executing command! විධානය ක්රියාත්මක කිරීමේ දෝෂය! - + Debugger must be paused to run a script! ස්ක්රිප්ට් එකක් ක්රියාත්මක කිරීම සඳහා නිදොස් කිරීම විරාම කළ යුතුය! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. තිර රචනය පරිශීලකයා විසින් අවසන් කර ඇත. diff --git a/x64dbg_sr_SP.ts b/x64dbg_sr_SP.ts index ce084f4..cfe439f 100644 --- a/x64dbg_sr_SP.ts +++ b/x64dbg_sr_SP.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_sv_SE.ts b/x64dbg_sv_SE.ts index 585a5e5..3ddae34 100644 --- a/x64dbg_sv_SE.ts +++ b/x64dbg_sv_SE.ts @@ -6429,7 +6429,7 @@ - + You can only set 4 hardware breakpoints @@ -7083,25 +7083,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8960,312 +8960,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9731,48 +9731,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_th_TH.ts b/x64dbg_th_TH.ts index eec99ca..14485bb 100644 --- a/x64dbg_th_TH.ts +++ b/x64dbg_th_TH.ts @@ -6431,7 +6431,7 @@ - + You can only set 4 hardware breakpoints @@ -7085,25 +7085,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8962,312 +8962,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9733,48 +9733,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_tr_TR.ts b/x64dbg_tr_TR.ts index 0c9f00d..055070c 100644 --- a/x64dbg_tr_TR.ts +++ b/x64dbg_tr_TR.ts @@ -6467,7 +6467,7 @@ - + You can only set 4 hardware breakpoints Sadece 4 donanım kesme noktası ayarlayabilirsiniz @@ -7159,25 +7159,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process başarısız oldu! - + Use x32dbg to debug this process! Bu işlemde hata ayıklama için x32dbg kullanın! - + Use x64dbg to debug this process! Bu işlemde hata ayıklama için x64dbg kullanın! @@ -9137,333 +9137,333 @@ Geçersiz veritabanı dosyası (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) Kesme noktası ayarlanamadı %p! (SetBPX) - + MemRead failed on breakpoint address %p! %p kesme noktasında hafıza okuması başarısız! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Hafıza kesme noktası ayarlanamadı %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Donanım kesme noktası ayarlanamadı %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Donanım kesme noktasını %p üzerine ayarla! - + Could not delete breakpoint %p! (DeleteBPX) Kesme noktası silinemiyor %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Hafıza kesme noktası silinemiyor %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Donanım kesme noktası silinemiyor %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Trace finished after %llu steps! - + Trace finished after %u steps! Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle başarısız oldu) - + Process Started: %p %s İşlemler Başladı: %p %s - + TLS Callback %d TLS Geri Dönüş Çağrısı %d - - + + %d invalid TLS callback addresses... %d invalid TLS callback addresses... - - + + entry breakpoint giriş kesme noktası - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry İş Parçacığı Girişinde - + Thread %s Stack - + No threads left to switch to (bug?) No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. Error: Cannot load debuggee initialization script. - + System breakpoint reached! Sistem Kesme Noktasına Ulaşıldı! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! Debugge giriş noktasının uygulamanın MZ başlığında olduğu tespit etti. Bu garip bir duruma neden olabilir, bu yüzden sistem kesme noktası ayarlarından bağımsız olarak etkinleştirildi. Dikkatli ol! - - + + TLS Callback TLS Geri Dönüş Çağrıları - + Waiting until ntdll.dll symbols are loaded... ntdll.dll sembolleri yüklenene kadar bekleniyor... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s DLL Yüklendi: %p %s - + DLL Unloaded: %p %s DLL Çıkarıldı: %p %s - + DebugString: "%s" DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! İlk şans istisna durumu %p (%.8X, %s)! - + First chance exception on %p (%.8X)! İlk şans istisna durumu %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Son şans istisna durumu %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Son şans istisna durumu %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? Yürütülebilir dosya, hata ayıklama için yükseltmeye ihtiyaç duyuyor. Yönetici olarak yeniden başlatılsın mı? - + Elevation Yükselt - + Error starting process (CreateProcess, %s)! İşlem başlatılırken hata oluştu (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! Hata ayıklayıcı durdu! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9965,48 +9965,48 @@ Do you want to continue debugging? Tüm Modüller (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText başarısız oldu... - + Empty label detected on line %d! Satır %d 'da boş etiket tespit edildi! - + Duplicate label "%s" detected on lines %d and %d! Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! Invalid branch label "%s" detected on line %d! - + Script finished! Komut dosyası tamamlandı! - + Error executing command! Error executing command! - + Debugger must be paused to run a script! Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Script is terminated by user. diff --git a/x64dbg_uk_UA.ts b/x64dbg_uk_UA.ts index e528312..a267b51 100644 --- a/x64dbg_uk_UA.ts +++ b/x64dbg_uk_UA.ts @@ -6470,7 +6470,7 @@ - + You can only set 4 hardware breakpoints Можна встановити лише 4 апаратні точки зупину @@ -7150,25 +7150,25 @@ - + Process is already being debugged! Процес вже відлагоджений! - + IsWow64Process failed! Не вдалося виконати IsWow64Process! - + Use x32dbg to debug this process! Використовуйте x32dbg для відлагодження цього процесу! - + Use x64dbg to debug this process! Використовуйте x64dbg для відлагодження цього процесу! @@ -9110,341 +9110,341 @@ Invalid database file (JSON)! - + Error when evaluating break condition. Помилка під час обчислення умови переривання. - - + + Error when evaluating log condition. Помилка при розрахунку стану журналу. - - + + Error when evaluating command condition. Помилка під час обчислення умови "command". - + Failed to open breakpoint log: %s (%s) Не вдалося відкрити журнал точки зупинки: %s (%s) - + User code reached at %s Код користувача досягнуто у %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X Точка зупину %p була вимкнена, оскільки байти не співпадають! Очікується: %02X %02X, отримано: %02X %02X - + Could not set breakpoint %p! (SetBPX) Не вдалося встановити точку зупину %p! (SetBPX) - + MemRead failed on breakpoint address %p! Помилка MemRead на точці зупинки по адресі %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) Не вдалося встановити точку зупинки пам'яті %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) Не вдалося встановити апаратну точку зупинки %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! Встановити апаратну точку зупину на %p! - + Could not delete breakpoint %p! (DeleteBPX) Не вдалося видалити точку зупинки %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) Не вдалося видалити точку зупинки пам'яті %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) Не вдалося вимкнути апаратну точку зупинки %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! Трасування завершено після %llu кроків - + Trace finished after %u steps! Трасування завершено після %u кроків - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle не вдалося) - + Process Started: %p %s Процес запущено: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... %d некоректні адреси TLS callback... - - + + entry breakpoint зупинка в точці входу - + Process stopped with exit code %s Процес зупинено з кодом виходу %s - + Thread %s created, Entry: %s, Parameter: %s Потік %s створено, точка входу: %s, параметр: %s - + Thread Entry Точка входу потоку - + Thread %s Stack Стек потоку %s - + No threads left to switch to (bug?) Не залишилось жодного потоку, на який можна перемкнутись (баг?) - + Thread %s exit Потік %s завершений - + Error: Cannot load global initialization script. Помилка: Не вдалося завантажити глобальний скрипт ініціалізації. - + Error: Cannot load debuggee initialization script. Помилка: Неможливо завантажити скрипт ініціалізації відлагодження. - + System breakpoint reached! Досягнута системна точка зупину! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! Було помічено, що записувана точка налагодження знаходиться в заголовку MZ виконуваного файла. Це призведе до дивної поведінки, тому системна точка зупину ввімкнена незалежно від ваших налаштувань. Будьте обережні! - - + + TLS Callback TLS Callback - + Waiting until ntdll.dll symbols are loaded... Очікування завантажених символів ntdll.dll... - + Set LdrpDebugFlags to 0x%08X successfully! Встановлення LdrpDebugFlags до 0x%08X успішно! - + Failed to write to LdrpDebugFlags Не вдалося записати в LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! Символ 'LdrpDebugFlags' не знайдено! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) Не вдалося знайти LdrpDebugFlags (необхідно завантажити символи для ntdll.dll). - + DLL Loaded: %p %s Завантажено DLL: %p %s - + DLL Unloaded: %p %s DLL вивантажено: %p %s - + DebugString: "%s" Рядок відлагодження: "%s" - + SetThreadName exception on %p (%X, "%s") Виняток SetThreadName на %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! Перша спроба виключення на %p (%.8X, %s)! - + First chance exception on %p (%.8X)! Перша спроба виключення на %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! Остання спроба виключення на %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! Остання спроба виключення на %p (%.8X)! - + Attached to process! Приєднатися до процесу! - + Error debugging DLL (failed to copy loader) Помилка налагодження DLL (не вдалося скопіювати лоадер) - + Error debugging DLL (loaddll.exe not found) Помилка налагодження DLL (loaddll.exe не знайдено) - + The executable you are trying to debug requires elevation. Restart as admin? Виконуваному файлу, який ви намагаєтеся відлагоджувати, потрібно підвищення прав. Перезапустити від імені адміністратора? - + Elevation Підвищення - + Error starting process (CreateProcess, %s)! Не вдалося запустити процес (CreateProcess, %s)! - + Attach to process failed: %s Приєднання до процесу не вдалося: %s - + Debugging stopped! Відлагодження призупинено! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9947,48 +9947,48 @@ Do you want to continue debugging? Всі модулі (%s) - + FileHelper::ReadAllText failed... Помилка у FileHelper::ReadAllText... - + Empty label detected on line %d! У рядку %d виявлено пусту мітку! - + Duplicate label "%s" detected on lines %d and %d! Дублювання мітки "%s" знайдено в рядках %d і %d! - - + + Invalid branch label "%s" detected on line %d! Знайдена недопустима мітка гілки "%s" в рядку %d! - + Script finished! Скрипт завершено! - + Error executing command! Помилка при виконанні команди! - + Debugger must be paused to run a script! Для запуску скрипту необхідно вимкнути відлагоджувач! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. Скрипт завершений користувачем. diff --git a/x64dbg_vi_VN.ts b/x64dbg_vi_VN.ts index 9704c6a..36ef9a5 100644 --- a/x64dbg_vi_VN.ts +++ b/x64dbg_vi_VN.ts @@ -6432,7 +6432,7 @@ - + You can only set 4 hardware breakpoints @@ -7086,25 +7086,25 @@ - + Process is already being debugged! - + IsWow64Process failed! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! @@ -8963,312 +8963,312 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) - + Process Started: %p %s - + TLS Callback %d - - + + %d invalid TLS callback addresses... - - + + entry breakpoint - + Process stopped with exit code %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback - + Waiting until ntdll.dll symbols are loaded... - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) - + DLL Loaded: %p %s - + DLL Unloaded: %p %s - + DebugString: "%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9734,48 +9734,48 @@ Do you want to continue debugging? - + FileHelper::ReadAllText failed... - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! - + Error executing command! - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. diff --git a/x64dbg_zh_CN.ts b/x64dbg_zh_CN.ts index 59b9a2d..45ae548 100644 --- a/x64dbg_zh_CN.ts +++ b/x64dbg_zh_CN.ts @@ -6476,7 +6476,7 @@ - + You can only set 4 hardware breakpoints 您最多只能设置4个硬件断点 @@ -7172,25 +7172,25 @@ - + Process is already being debugged! 进程已经在调试！ - + IsWow64Process failed! IsWow64Process 失败 ！ - + Use x32dbg to debug this process! 请您用x32dbg来调试这个程序！ - + Use x64dbg to debug this process! 请您用x64dbg来调试这个程序！ @@ -9163,340 +9163,340 @@ JSON数据库文件无效！ - + Error when evaluating break condition. 暂停条件计算出错。 - - + + Error when evaluating log condition. 日志条件计算出错。 - - + + Error when evaluating command condition. 命令条件计算出错。 - + Failed to open breakpoint log: %s (%s) 打开断点日志失败: %s (%s) - + User code reached at %s 已到达用户代码 %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X 由于字节不匹配，断点%p已经禁用。预期：%02X %02X, 实际：%02X %02X - + Could not set breakpoint %p! (SetBPX) 无法设置断点 %p! (SetBPX) - + MemRead failed on breakpoint address %p! MemRead在断点地址%p上失败了！ - + Could not set memory breakpoint %p! (SetMemoryBPXEx) 无法设置内存断点 %p! (SetMemoryBPX) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) 无法设置硬件断点 %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! 已设置硬件断点于 %p! - + Could not delete breakpoint %p! (DeleteBPX) 无法删除断点 %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) 无法删除内存断点 %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) 无法删除硬件断点 %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! 追踪 %llu 步后成功结束！ - + Trace finished after %u steps! 追踪 %u 步后成功结束！ - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle 失败) - + Process Started: %p %s 进程已启动： %p %s - + TLS Callback %d TLS回调函数%d - - + + %d invalid TLS callback addresses... %d个无效的TLS回调函数地址…… - - + + entry breakpoint 入口断点 - + Process stopped with exit code %s 进程已停止，退出码为 %s - + Thread %s created, Entry: %s, Parameter: %s 线程 %s 已创建，入口：%s，参数：%s - + Thread Entry 线程入口 - + Thread %s Stack 线程 %s 堆栈... - + No threads left to switch to (bug?) 没有剩下的线程可以切换(bug?) - + Thread %s exit 线程 %s 退出 - + Error: Cannot load global initialization script. 错误︰ 无法加载全局初始化脚本。 - + Error: Cannot load debuggee initialization script. 错误︰ 无法加载调试对象初始化脚本。 - + System breakpoint reached! 已到达系统断点！ - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! 检测到调试器入口点位于程序的 MZ 头中，这将导致异常现象，因此系统断点已被强制开启。请注意！ - - + + TLS Callback TLS回调函数 - + Waiting until ntdll.dll symbols are loaded... 正在等待 ntdll.dll 符号载入... - + Set LdrpDebugFlags to 0x%08X successfully! 成功将 LdrpDebugFlags 设置为 0x%08X！ - + Failed to write to LdrpDebugFlags 无法写入 LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! 找不到符号“LdrpDebugFlags”！ - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) 找不到LdrpDebugFlags（您需要为ntdll.dll加载符号） - + DLL Loaded: %p %s DLL已载入： %p %s - + DLL Unloaded: %p %s DLL已卸载： %p %s - + DebugString: "%s" 调试字符串： "%s" - + SetThreadName exception on %p (%X, "%s") SetThreadName 异常发生于 %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! 第一次异常于 %p (%.8X, %s)！ - + First chance exception on %p (%.8X)! 第一次异常于 %p (%.8X)！ - + Last chance exception on %p (%.8X, %s)! 第二次异常于 %p (%.8X, %s)！ - + Last chance exception on %p (%.8X)! 第二次异常于 %p (%.8X)！ - + Attached to process! 已附加到进程！ - + Error debugging DLL (failed to copy loader) 调试DLL时发生错误 (无法复制加载器) - + Error debugging DLL (loaddll.exe not found) 调试DLL时出错 (找不到 loaddll.exe) - + The executable you are trying to debug requires elevation. Restart as admin? 您要调试的程序需要提升权限。以管理员身份重新启动吗？ - + Elevation 提升权限 - + Error starting process (CreateProcess, %s)! 启动进程 (CreateProcess，%s) 时出错！ - + Attach to process failed: %s 附加到进程失败：%s - + Debugging stopped! 调试结束！ - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -10005,48 +10005,48 @@ Do you want to continue debugging? 所有模块 (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText 失败…… - + Empty label detected on line %d! 发现在行 %d 上有空的标签！ - + Duplicate label "%s" detected on lines %d and %d! 发现重复的标签"%s"于行%d和%d！ - - + + Invalid branch label "%s" detected on line %d! 检测到无效的分支标签“%s”于行%d！ - + Script finished! 脚本执行完毕！ - + Error executing command! 执行命令时出错！ - + Debugger must be paused to run a script! 调试器只有在暂停时才能运行脚本！ - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. 脚本被用户终止。 diff --git a/x64dbg_zh_TW.ts b/x64dbg_zh_TW.ts index f8909bd..cb67272 100644 --- a/x64dbg_zh_TW.ts +++ b/x64dbg_zh_TW.ts @@ -6461,7 +6461,7 @@ - + You can only set 4 hardware breakpoints 你只能設置4個硬體中斷點 @@ -7137,25 +7137,25 @@ - + Process is already being debugged! - + IsWow64Process failed! IsWow64Process 失敗! - + Use x32dbg to debug this process! - + Use x64dbg to debug this process! 請用 x64dbg 來除錯此程式！ @@ -9048,319 +9048,319 @@ Invalid database file (JSON)! - + Error when evaluating break condition. - - + + Error when evaluating log condition. - - + + Error when evaluating command condition. - + Failed to open breakpoint log: %s (%s) - + User code reached at %s - + Breakpoint %p has been disabled because the bytes don't match! Expected: %02X %02X, Found: %02X %02X - + Could not set breakpoint %p! (SetBPX) - + MemRead failed on breakpoint address %p! - + Could not set memory breakpoint %p! (SetMemoryBPXEx) - + Could not set hardware breakpoint %p! (SetHardwareBreakPoint) - + Set hardware breakpoint on %p! 在 %p 設定硬體中斷點! - + Could not delete breakpoint %p! (DeleteBPX) - + Could not delete memory breakpoint %p! (RemoveMemoryBPX) - + Could not delete hardware breakpoint %p! (DeleteHardwareBreakPoint) - + Trace finished after %llu steps! - + Trace finished after %u steps! - - + + ??? (GetFileNameFromHandle failed) ??? (GetFileNameFromHandle 失敗) - + Process Started: %p %s 處理程序已啟動: %p %s - + TLS Callback %d TLS Callback %d - - + + %d invalid TLS callback addresses... %d 不正確的 TLS callback 位置... - - + + entry breakpoint 入口中斷點 - + Process stopped with exit code %s 處理程序停止，其結束代碼爲 %s - + Thread %s created, Entry: %s, Parameter: %s - + Thread Entry 執行緒入口 - + Thread %s Stack - + No threads left to switch to (bug?) - + Thread %s exit - + Error: Cannot load global initialization script. - + Error: Cannot load debuggee initialization script. - + System breakpoint reached! 已到達系統中斷點！ - + It has been detected that the debuggee entry point is in the MZ header of the executable. This will cause strange behavior, so the system breakpoint has been enabled regardless of your setting. Be careful! - - + + TLS Callback TLS Callback - + Waiting until ntdll.dll symbols are loaded... 正等待ntdll.dll符號載入…… - + Set LdrpDebugFlags to 0x%08X successfully! - + Failed to write to LdrpDebugFlags 無法寫入 LdrpDebugFlags - + Symbol 'LdrpDebugFlags' not found! - + Failed to find LdrpDebugFlags (you need to load symbols for ntdll.dll) 找不到LdrpDebugFlags（您需要為ntdll.dll加載符號） - + DLL Loaded: %p %s DLL 載入：%p %s - + DLL Unloaded: %p %s DLL 卸載：%p %s - + DebugString: "%s" 除錯字串："%s" - + SetThreadName exception on %p (%X, "%s") - + First chance exception on %p (%.8X, %s)! - + First chance exception on %p (%.8X)! - + Last chance exception on %p (%.8X, %s)! - + Last chance exception on %p (%.8X)! - + Attached to process! - + Error debugging DLL (failed to copy loader) - + Error debugging DLL (loaddll.exe not found) - + The executable you are trying to debug requires elevation. Restart as admin? - + Elevation - + Error starting process (CreateProcess, %s)! - + Attach to process failed: %s - + Debugging stopped! 除錯停止！ - + Drivers known to interfere with x64dbg's operation have been detected. List of drivers: @@ -9842,48 +9842,48 @@ Do you want to continue debugging? 所有模組 (%s) - + FileHelper::ReadAllText failed... FileHelper::ReadAllText 失敗…… - + Empty label detected on line %d! - + Duplicate label "%s" detected on lines %d and %d! - - + + Invalid branch label "%s" detected on line %d! - + Script finished! 腳本完成！ - + Error executing command! 執行命令時發生錯誤！ - + Debugger must be paused to run a script! - + The script has been running for a while. Would you like to terminate it now? - + Script is terminated by user. 腳本被使用者終止。