diff --git a/x64dbg.ts b/x64dbg.ts index 9fba7cb..88a7c68 100644 --- a/x64dbg.ts +++ b/x64dbg.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3086,133 +3065,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3878,260 +3857,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4831,12 +4841,13 @@ - + + Actions @@ -5496,97 +5507,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6003,7 +6019,7 @@ - + Done! @@ -8178,28 +8194,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9511,147 +9527,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9873,49 +9889,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14177,7 +14193,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15855,90 +15871,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_af_ZA.ts b/x64dbg_af_ZA.ts index 27d0dc9..c7bdccb 100644 --- a/x64dbg_af_ZA.ts +++ b/x64dbg_af_ZA.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ar_SA.ts b/x64dbg_ar_SA.ts index ea679ad..51f6f10 100644 --- a/x64dbg_ar_SA.ts +++ b/x64dbg_ar_SA.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ التحليل - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value تعديل القيمة - - - - - + + + + Error خطأ - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! خطأ! - + Not inside a module... ليس ضمن مكون... - + Goto File Offset in %1 - - - - + + + + Hex سداسي عشر - - - + + + ASCII نظام آسكي - - - + + + UNICODE يونيكود - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value القيمة - - + + Comments التعليقات - + Edit data at %1 تعديل البيانات في %1 - + Fill data at %1 تعبئة البيانات في %1 - + Save to file حفظ الى ملف - + All files (*.*) كافة الملفات (*. *) - + Find Pattern... ابحث عن النمط... - + Selection not in a file... - + Dump تفريغ - + Enter expression to sync with... - + Size ‮الحجم - + Warning تحذير - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value تعديل القيمة - + Increment value - + Decrement value - + Zero value - + Toggle تفعيل - + Undo التراجع - + Follow in Disassembler تتبع في نافذة المحلل - + Follow in Dump تتبع في نافذة التفريغ - + Follow in Stack تتبع في المكدس - + Follow in Memory Map اتبع في مخطط الذاكرة - + &Remove hardware breakpoint - + Increment x87 Stack زيادة قيمة مكدس x87 - + Decrement x87 Stack إنقاص قيمة مكدس 0x87 - + Highlight تظليل - + Error خطأ - - + + Edit %1 - - - - - + + + + + Edit تحرير - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump تتبع في نافذة التفريغ - + Copy old value: %1 - + Set Hardware Breakpoint on %1 تعيين نقطة توقف العتاد على %1 @@ -3878,260 +3857,291 @@ CommonActions - + Follow in Disassembler تتبع في نافذة المحلل - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &تتبع DWORD في نافذة المفكك - + &Follow QWORD in Disassembler &تتبع QWORD في نافذة المفكك - + Follow in Dump تتبع في نافذة التفريغ - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &تتبع DWORD في نافذة التفريغ - + &Follow QWORD in Current Dump &تتبع QWORD في نافذة التفريغ - + Dump %1 تفريغ %1 - + Follow DWORD in Dump تتبع DWORD في نافذة التفريغ - + Follow QWORD in Dump تتبع QWORD في نافذة التفريغ - + Follow in Stack تتبع في المكدس - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map اتبع في مخطط الذاكرة - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph رسم بياني - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle تفعيل - - + + Edit تحرير - - + + Set Hardware on Execution وضع نقطة توقف العتاد - + Remove Hardware إزالة نقطة توقف العتاد - - - - + + + + Replace Slot %1 (Unknown) استبدال الخانة %1 (مجهول) - + Breakpoint نقطة توقف - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) استبدال الفتحة %1 (0x%2) - + Label Current Address تسمية العنوان الحالي - + Comment التعليق - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at إضافة تسمية في - + The label may be in use قد تكون التسمية قيد الإستخدام - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? قد تكون التسمية "%1" تسمية موجودة أو تعبير صالح. استخدام هذه التسمية قد تحصل آثار غير مرغوب فيها. هل تريد الاستمرار؟ - - - + + + Error! خطأ! - + DbgSetLabelAt failed! فشل أثناء DbgSetLabelAt! - + Add comment at إضافة تعليق على - + DbgSetCommentAt failed! فشل أثناء DbgSetCommentAt! - + DbgSetBookmarkAt failed! فشل أثناء DbgSetBookmarkAt! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + خطأ + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4831,12 +4841,13 @@ - + + Actions @@ -5496,97 +5507,102 @@ + Display type + + + + Freeze the stack تجميد المكدس - + Go to Base of Stack Frame - + Go to Previous Stack Frame - + Go to Next Stack Frame - + Go to Previous Reference - + Go to Next Reference - + Modify value تعديل القيمة - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6005,7 +6021,7 @@ - + Done! تـم! @@ -8212,28 +8228,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9559,147 +9575,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9921,49 +9937,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14234,7 +14250,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15912,90 +15928,90 @@ The TEB can be used to get a lot of information on the process without calling W القيمة - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address تغيير العنوان - + Display type - - + + Load JSON تحميل JSON - - + + Parse header - + Remove ازالة - + Clear مسح - + &Refresh تحديث - + &Copy نسخ - + Error خطأ - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) ملفات JSON (*.json)؛؛ كافة الملفات (*. *) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_bg_BG.ts b/x64dbg_bg_BG.ts index 5b6c098..6ead6dc 100644 --- a/x64dbg_bg_BG.ts +++ b/x64dbg_bg_BG.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2695,250 +2695,229 @@ - - Display type - - - - - + + System Code Системен код - + System Data Системни данни - - + + User Code Потребителски код - + User Data Потребителски данни - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (Низ) - + (Unknown String) (Неизвестен низ) - - - + + + Modify value - - - - - + + + + Error Грешка - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! Грешка! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex 16-ично (hex): - - - + + + ASCII ASCII - - - + + + UNICODE Уникод - + Float (32-bit) Плаващ(32-битов) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value Стойност - - + + Comments Коментари - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) Всички файлове (*.*) - + Find Pattern... - + Selection not in a file... - + Dump Дъмп - + Enter expression to sync with... - + Size Размер - + Warning Предупреждение - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3086,133 +3065,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit Редактиране - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3878,260 +3857,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit Редактиране - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Точки на прекъсване - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Коментар - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! Грешка! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4831,12 +4841,13 @@ - + + Actions @@ -5496,97 +5507,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6003,7 +6019,7 @@ - + Done! Готово! @@ -8178,28 +8194,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9511,147 +9527,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9873,49 +9889,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14177,7 +14193,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15855,90 +15871,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear Изчистване - + &Refresh - + &Copy &Копиране - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_bs_BA.ts b/x64dbg_bs_BA.ts index b8d523c..1741796 100644 --- a/x64dbg_bs_BA.ts +++ b/x64dbg_bs_BA.ts @@ -2597,68 +2597,68 @@ Kopiraj token &tekst - + Signed byte (8-bit) Potpisani bajt (8-bit) - + Signed short (16-bit) Potpisani kratki (16-bitni) - + Signed long (32-bit) Potpisano dugo (32-bitna) - + Signed long long (64-bit) Potpisano dugo dugo (64-bit) - + Unsigned byte (8-bit) Nepotpisani bajt (8-bit) - + Unsigned short (16-bit) Nepotpisani kratki (16-bitni) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned dugo dugo (64-bit) - + Hex short (16-bit) Hex kratki (16-bitni) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex dugo dugo (64-bit) @@ -2704,250 +2704,229 @@ Hex dugo dugo (64-bit) &Disassembliranje - - Display type - - - - - + + System Code Sistemski Kod - + System Data Sistemski Podaci - - + + User Code Korisnikov Kod - + User Data Korisnikovi Podaci - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BAJT) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Nepoznati String) - - - + + + Modify value Uredi vrijednost - - - - - + + + + Error Greška - - + + The input text is not a number! Uneseni tekst nije broj! - + Enter expression to follow in Dump... Unesite izraz da pratite u Deponiji... - - + + Error! Greška! - + Not inside a module... Nije unutar module... - + Goto File Offset in %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Value - - + + Comments Komentari - + Edit data at %1 Uredi podatke kod %1 - + Fill data at %1 Ispuni podatke kod %1 - + Save to file Sačuvaj u Fajl - + All files (*.*) Svi fajlovi - + Find Pattern... &Traži izraz - + Selection not in a file... Selekcija nije u fajlu... - + Dump Deponije: - + Enter expression to sync with... Unesite izraz/ekspresiju za sinkronizaciju s... - + Size Veličina - + Warning Upozorenje - + You're trying to allocate a zero-sized buffer just now. Pokušavate dodijeliti buffer nulte veličine. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Veličina buffer-a koju pokušavate dodijeliti premašuje 1 GB. Provjerite svoj izraz/ekspresiju kako biste bili sigurni da nešto nije u redu. - + Memory allocation failed! Dodjela memorije nije uspjela! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3095,133 +3074,133 @@ Hex dugo dugo (64-bit) CPURegistersView - + Modify value Uredi vrijednost - + Increment value Povećanje vrijednosti - + Decrement value Smanjenje vrijednosti - + Zero value Nula vrijednost - + Toggle Podesi - + Undo Vratiti - + Follow in Disassembler Prati u Disasembler-u - + Follow in Dump Prati u Deponiji - + Follow in Stack Prati u Šteku - + Follow in Memory Map Prati u Mapi Memorije - + &Remove hardware breakpoint &Ukloni hardver breakpoint - + Increment x87 Stack Povećanje x87 Stack - + Decrement x87 Stack Smanjenje x87 Stack - + Highlight Oznaka - + Error Greška - - + + Edit %1 - - - - - + + + + + Edit Uredi - - + + Edit %1 register - + Edit FPU register Uredi FPU register - + ERROR CONVERTING TO HEX GREŠKA PRETVARANJA U HEX - + Set Last Error Postavi Posljednju Grešku - + Set Last Status Postavi Posljednji Status - + Follow in &Dump Prati u &Dump-u - + Copy old value: %1 Kopiraj staru vrijednost: %1 - + Set Hardware Breakpoint on %1 Postavi Hardware Breakpoint na %1 @@ -3887,260 +3866,291 @@ Hex dugo dugo (64-bit) CommonActions - + Follow in Disassembler Prati u Disassembler-u - + Show this address in disassembler. Equivalent command "d address". Prikaži ovu adresu u disassembler-u. Jednaka komanda "d address". - + &Follow DWORD in Disassembler &Prati DWORD u Disassembler-u - + &Follow QWORD in Disassembler &Prati QWORD u Disassembler-u - + Follow in Dump Prati u Deponiji - + Show the address in dump. Equivalent command "dump address". Prikaži adresu u dump. Jednaka komanda "dump adress". - + &Follow DWORD in Current Dump &Prati DWORD u Trenutačnom Dump-u - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Podesi - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Komentar - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at Dodajte oznaku na - + The label may be in use Oznaka je možda u upotrebi - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Oznaka "%1" može biti postojeća oznaka ili važeći izraz. Upotreba takve oznake može imati neželjene efekte. Želite li nastaviti? - - - + + + Error! Greška! - + DbgSetLabelAt failed! DbgSetLabelAt nije uspio! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + Greška + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4840,12 +4850,13 @@ Hex dugo dugo (64-bit) - + + Actions @@ -5505,97 +5516,102 @@ Hex dugo dugo (64-bit) - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference + Go to Next Reference + + + + Modify value Uredi vrijednost - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NIJE PRONAĐEN U KONFIGURACIJI! @@ -6012,7 +6028,7 @@ Hex dugo dugo (64-bit) - + Done! @@ -8187,28 +8203,28 @@ Hex dugo dugo (64-bit) - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9520,147 +9536,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9882,49 +9898,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14187,7 +14203,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15865,90 +15881,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy &Kopiraj - + Error Greška - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ca_ES.ts b/x64dbg_ca_ES.ts index a848f44..1a3f008 100644 --- a/x64dbg_ca_ES.ts +++ b/x64dbg_ca_ES.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions @@ -5495,97 +5506,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6002,7 +6018,7 @@ - + Done! @@ -8177,28 +8193,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9510,147 +9526,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9872,49 +9888,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14176,7 +14192,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15854,90 +15870,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ceb_PH.ts b/x64dbg_ceb_PH.ts index b90224e..b0d2575 100644 --- a/x64dbg_ceb_PH.ts +++ b/x64dbg_ceb_PH.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions @@ -5495,97 +5506,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6002,7 +6018,7 @@ - + Done! @@ -8177,28 +8193,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9510,147 +9526,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9872,49 +9888,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14176,7 +14192,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15854,90 +15870,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_cs_CZ.ts b/x64dbg_cs_CZ.ts index 1743f29..e5a6dff 100644 --- a/x64dbg_cs_CZ.ts +++ b/x64dbg_cs_CZ.ts @@ -2599,67 +2599,67 @@ - + Signed byte (8-bit) Podepsano byte (8 bitů) - + Signed short (16-bit) Podepsáno krátce (16 bitů) - + Signed long (32-bit) Podepsáné dlouho (32-bit) - + Signed long long (64-bit) Podepsané dlouhé dlouhé (64bitové) - + Unsigned byte (8-bit) Nepodepsaný byte (8 bitů) - + Unsigned short (16-bit) Nepodepsaný krátký (16-bit) - + Unsigned long (32-bit) Nepodepsaný dlouhý (32-bit) - + Unsigned long long (64-bit) Nezapsaný dlouhý (64bit) - + Hex short (16-bit) Hex krátká (16-bit) - + Hex long (32-bit) Hex dlouhý (32-bit) - + Hex long long (64-bit) Hex dlouhý dlouhý (64bit) @@ -2704,250 +2704,229 @@ &Demontáž - - Display type - - - - - + + System Code Kód Systému - + System Data Systémová data - - + + User Code Uživatelský kód - + User Data Uživatelské údaje - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) Řetězce - + (Unknown String) (Neznámý řetězec) - - - + + + Modify value Upravit hodnotu - - - - - + + + + Error Chyba - - + + The input text is not a number! Vstupní text není číslo! - + Enter expression to follow in Dump... Zadejte výraz pro sledování v Dump... - - + + Error! Chyba! - + Not inside a module... Ne uvnitř modulu... - + Goto File Offset in %1 Přejít na odsazení souboru v %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNIKÓD - + Float (32-bit) activate (32-bit) - + Double (64-bit) &Dvojitý (64bit) - + Long double (80-bit) Dlouhé dvojité (80-bit) - + Half float (16-bit) - - + + Value Hodnota - - + + Comments Komentáře - + Edit data at %1 Upravit data na %1 - + Fill data at %1 Vyplňte data na %1 - + Save to file Ulož do souboru - + All files (*.*) Všechny soubory (*.*) - + Find Pattern... Najít vzorek... - + Selection not in a file... Výběr není v souboru ... - + Dump Výpis - + Enter expression to sync with... Zadejte výraz pro synchronizaci... - + Size Velikosti - + Warning Varování - + You're trying to allocate a zero-sized buffer just now. Právě se pokoušíte alokovat nulovou vyrovnávací paměť. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Velikost vyrovnávací paměti, kterou se pokoušíte přidělit, přesahuje 1 GB. Zkontrolujte prosím svůj výraz, abyste se ujistili, že nic není špatně. - + Memory allocation failed! Přidělení paměti se nezdařilo! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3095,133 +3074,133 @@ CPURegistersView - + Modify value Upravit hodnotu - + Increment value Zvýšit hodnotu - + Decrement value Snížit hodnotu - + Zero value Vynulovat hodnotu - + Toggle Přepnout - + Undo Vrátit zpět - + Follow in Disassembler Následovat v demontáži - + Follow in Dump Sledujte v Dump - + Follow in Stack Obnovit výběr - + Follow in Memory Map Sledujte mapu paměti - + &Remove hardware breakpoint &Odstranit hardwarové přerušení - + Increment x87 Stack Zvýšení zásobníku x87 - + Decrement x87 Stack Snížit zásobník x87 - + Highlight Hlavní body - + Error Chyba - - + + Edit %1 - - - - - + + + + + Edit Upravit - - + + Edit %1 register - + Edit FPU register Upravit registr FPU - + ERROR CONVERTING TO HEX CHYBA PŘEVODU NA HEX - + Set Last Error Nastavit poslední chybu - + Set Last Status Nastavit poslední stav - + Follow in &Dump Následujte &Dump - + Copy old value: %1 Kopírovat starou hodnotu: %1 - + Set Hardware Breakpoint on %1 Nastavit hardwarové přerušení na %1 @@ -3888,260 +3867,291 @@ CommonActions - + Follow in Disassembler Následovat v demontáži - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Následovat DWORD v demontáži - + &Follow QWORD in Disassembler &Následovat QWORD v demontáži - + Follow in Dump Sledujte v Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Následovat DWORD v aktuálním výpisu - + &Follow QWORD in Current Dump Postupujte podle WORD v aktuálním výpisu - + Dump %1 Výpis %1 - + Follow DWORD in Dump Sledujte DWORD v Dump - + Follow QWORD in Dump Sledujte QWORD v Dump - + Follow in Stack Obnovit výběr - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Sledujte mapu paměti - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Graf - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Přepnout - - + + Edit Upravit - - + + Set Hardware on Execution Nastavte hardware na spuštění - + Remove Hardware Odebrat hardware - - - - + + + + Replace Slot %1 (Unknown) Nahradit slot %1 (neznámý) - + Breakpoint Přerušení - + Set Conditional Breakpoint Nastavit podmíněné přerušení - + Replace Slot %1 (0x%2) Nahradit slot %1 (0x%2) - + Label Current Address Označit aktuální adresu - + Comment Komentáře - + Toggle Bookmark Přepnout záložku - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Nastavit %1 zde - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Vytvořit nový podproces - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD &Sledovat DWORD - + &Watch QWORD &Sledovat QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Nelze sledovat %1. Adresa je neplatná. - + Add label at Přidat štítek na - + The label may be in use Popisek může být používán - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Označení "%1" mohou být existující popisek nebo platný výraz. Používání takových označení by mohlo mít nežádoucí účinky. Chcete přesto pokračovat? - - - + + + Error! Chyba! - + DbgSetLabelAt failed! DbgSetLabelAt selhala! - + Add comment at Přidat komentář na - + DbgSetCommentAt failed! DbgSetCommentAt selhala! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt se nezdařilo! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Nastavení softwarového přerušení na tomto místě může způsobit pád programu. Opravdu chcete pokračovat? - + + Error + Chyba + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Nastavení nového původu zde může způsobit selhání. Opravdu chcete pokračovat? - + Creating new thread here may result in crash. Do you really want to continue? Vytvoření nového vlákna zde může způsobit selhání. Opravdu chcete pokračovat? - + Argument for the new thread Argument pro nové vlákno @@ -4841,12 +4851,13 @@ - + + Actions Akce @@ -5507,97 +5518,102 @@ + Display type + + + + Freeze the stack Zmrazte zásobník - + Go to Base of Stack Frame Přejděte na Základnu rámečku - + Go to Previous Stack Frame Přejděte na Předchozí rámeček sady - + Go to Next Stack Frame Přejděte na další rámeček sady - + Go to Previous Reference Přejít na předchozí referenci - + Go to Next Reference Přejít na následující referenci - + Modify value Upravit hodnotu - + Watch DWORD/QWORD Sledovat DWORD/QWORD - + Copy File Offset Kopírovat offset souboru - + Start/Stop trace recording Zahájit/Zastavit záznam - + Copy -> Cropped Table Kopírovat -> Oříznutou tabulku - + Copy -> Table Kopírovat -> Tabulku - + Copy -> Line, To Log Kopírovat -> Řádek, do logu - + Copy -> Cropped Table, To Log Kopírovat -> Oříznutou tabulku, do logu - + Copy -> Table, To Log Kopírovat -> Tabulku, do logu - + Copy -> Export Table Kopírovat -> Tabulku exportů - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NEBYLA V KONFIGURACI NALEZENA! @@ -6016,7 +6032,7 @@ - + Done! @@ -8197,28 +8213,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9530,147 +9546,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9892,49 +9908,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14196,7 +14212,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15874,90 +15890,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy & Kopírovat - + Error Chyba - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_da_DK.ts b/x64dbg_da_DK.ts index fa445f4..c44babf 100644 --- a/x64dbg_da_DK.ts +++ b/x64dbg_da_DK.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler Følg i Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Følg DWORD i Disassembler - + &Follow QWORD in Disassembler &Følg QWORD i Disassembler - + Follow in Dump Følg i Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Følg DWORD i den aktuelle Dump - + &Follow QWORD in Current Dump &Følg QWORD i den aktuelle Dump - + Dump %1 Dump %1 - + Follow DWORD in Dump &Følg DWORD i den Dump - + Follow QWORD in Dump &Følg QWORD i den Dump - + Follow in Stack Følg i stak - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Følg i hukommelseskort - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) Erstat Slot %1 (ukendt) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) Erstat Slot %1 (0x%2) - + Label Current Address Label Nuværende Adresse - + Comment Kommentar - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! Fejl! - + DbgSetLabelAt failed! DbgSetLabelAt mislykkedes! - + Add comment at - + DbgSetCommentAt failed! DbgSetCommentAt mislykkedes! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt mislykkedes! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_de_DE.ts b/x64dbg_de_DE.ts index 9d757f4..6f3d4dd 100644 --- a/x64dbg_de_DE.ts +++ b/x64dbg_de_DE.ts @@ -2593,67 +2593,67 @@ - + Signed byte (8-bit) Signed byte (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2698,250 +2698,229 @@ &Disassembler - - Display type - - - - - + + System Code Systemcode - + System Data System-Daten - - + + User Code User-Code - + User Data User-Daten - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Unbekannter String) - - - + + + Modify value Wert ändern - - - - - + + + + Error Fehler - - + + The input text is not a number! Der Eingabetext ist keine Zahl! - + Enter expression to follow in Dump... Gebe Ausdruck zum Anschauen im Dump ein... - - + + Error! Fehler! - + Not inside a module... Nicht innerhalb eines Moduls... - + Goto File Offset in %1 Zu Dateioffset in %1 gehen - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Wert - - + + Comments Kommentare - + Edit data at %1 Daten bei %1 bearbeiten - + Fill data at %1 Bei %1 mit Daten füllen - + Save to file Speichern unter - + All files (*.*) Alle Dateien (*.*) - + Find Pattern... Finde Muster im Speicher... - + Selection not in a file... Auswahl nicht in einer Datei... - + Dump Dump - + Enter expression to sync with... Synchronisieren mit Ausdruck... - + Size Größe - + Warning Warnung - + You're trying to allocate a zero-sized buffer just now. Sie versuchen, einen 0-Byte-Puffer anzufordern. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Sie versuchen mehr als 1 GB anzufordern. Bitte überprüfen Sie Ihren Ausdruck noch einmal. - + Memory allocation failed! Speicheranforderung fehlgeschlagen! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3092,133 +3071,133 @@ CPURegistersView - + Modify value Wert ändern - + Increment value Wert erhöhen - + Decrement value Wert verkleinern - + Zero value Wert auf Null setzen - + Toggle Umschalten - + Undo Rückgängig - + Follow in Disassembler Inspiziere im Disassembler - + Follow in Dump Inspiziere im Dump - + Follow in Stack Inspiziere im Stapel - + Follow in Memory Map Inspiziere Speicherbereich - + &Remove hardware breakpoint &Hardware-Haltepunkt entfernen - + Increment x87 Stack x87 Stapel inkrementieren - + Decrement x87 Stack x87 Stapel dekrementieren - + Highlight Hervorheben - + Error Fehler - - + + Edit %1 - - - - - + + + + + Edit Editieren - - + + Edit %1 register - + Edit FPU register FPU Register bearbeiten - + ERROR CONVERTING TO HEX FEHLER BEI DER KONVERTIERUNG IN HEX - + Set Last Error LastError setzen - + Set Last Status LastStatus setzen - + Follow in &Dump Inspiziere im &Dump - + Copy old value: %1 Alten Wert kopieren: %1 - + Set Hardware Breakpoint on %1 Hardwarebreakpoint an %1 setzen @@ -3885,261 +3864,292 @@ CommonActions - + Follow in Disassembler Inspiziere im Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Im Disassembler als DWORD anschauen - + &Follow QWORD in Disassembler &Im Disassembler als QWORD inspizieren - + Follow in Dump Inspiziere im Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Im Dump als DWORD anschauen - + &Follow QWORD in Current Dump &Im Dump als QWORD anschauen - + Dump %1 Dump %1 - + Follow DWORD in Dump Folge DWORD im Dump - + Follow QWORD in Dump Folge QWORD im Dump - + Follow in Stack Inspiziere im Stapel - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Inspiziere Speicherbereich - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Diagramm - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Umschalten - - + + Edit Editieren - - + + Set Hardware on Execution Hardware bei Ausführung setzen - + Remove Hardware Hardware entfernen - - - - + + + + Replace Slot %1 (Unknown) Slot %1 ersetzen (unbekannt) - + Breakpoint Haltepunkt - + Set Conditional Breakpoint Setze bedingten Haltepunkt - + Replace Slot %1 (0x%2) Slot %1 (0x%2 ) ersetzen - + Label Current Address Marke für aktuelle Adresse - + Comment Kommentar - + Toggle Bookmark Lesezeichen umschalten - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here %1 hier setzen - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Erstelle einen neuen Thread hier - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD DWORD &beobachten - + &Watch QWORD QWORD &beobachten - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. %1 folgen nicht kann. Adresse ist ungültig. - + Add label at Marke setzen bei - + The label may be in use Das Label könnte in Verwendung sein - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Das Label "%1" ist eventuell ein bereits existierendes Label oder ein gültiger Ausdruck. Die Verwendung eines solchen Labels kann unvorhergesehene Auswirkungen haben. Trotzdem fortfahren? - - - + + + Error! Fehler! - + DbgSetLabelAt failed! DbgSetLabelAt fehlgeschlagen! - + Add comment at Kommentar hinzufügen bei - + DbgSetCommentAt failed! DbgSetCommentAt fehlgeschlagen! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt fehlgeschlagen! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Hier einen Software-Haltepunkt festzulegen kann zum Absturz führen. Möchten Sie wirklich fortfahren? - + + Error + Fehler + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Hier eine neues Origin einzustellen kann zum Absturz führen. Möchten Sie wirklich fortfahren? - + Creating new thread here may result in crash. Do you really want to continue? Hier einen neuen Thread zu erstellen kann zum Absturz führen. Möchten Sie wirklich fortfahren? - + Argument for the new thread Argument für den neuen Thread @@ -4839,12 +4849,13 @@ - + + Actions Aktionen @@ -5504,97 +5515,102 @@ + Display type + + + + Freeze the stack Stapel einfrieren - + Go to Base of Stack Frame Gehe zur Basis des Stack-Rahmens - + Go to Previous Stack Frame Gehe zu vorherigen Stapel Rahmen - + Go to Next Stack Frame Gehe zu nächsten Stapel Rahmen - + Go to Previous Reference Gehe zu vorheriger Referenz - + Go to Next Reference Gehe zu nächster Referenz - + Modify value Wert ändern - + Watch DWORD/QWORD DWORD/QWORD beobachten - + Copy File Offset Datei-Offset kopieren - + Start/Stop trace recording Trace-Aufnahme starten/stoppen - + Copy -> Cropped Table Kopieren -> Zugeschnittene Tabelle - + Copy -> Table Kopieren-> Tabelle - + Copy -> Line, To Log Kopieren -> Zeile, zum Log - + Copy -> Cropped Table, To Log Kopieren -> Zugeschnittene Tabelle, ins Log - + Copy -> Table, To Log Kopieren-> Tabelle, zum Log - + Copy -> Export Table Kopieren-> Tabelle exportieren - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NICHT IN CONFIG GEFUNDEN! @@ -6023,7 +6039,7 @@ - + Done! Fertig! @@ -8332,29 +8348,29 @@ SizeofType fehlgeschlagen - + VisitType failed VisitType fehlgeschlagen - + RemoveType failed RemoveType fehlgeschlagen - + Type %s removed Typ %s entfernt - + LoadTypes failed LoadTypes fehlgeschlagen - + Types loaded Typen geladen @@ -9756,169 +9772,169 @@ Möchten Sie das Debuggen fortsetzen? StaticFileUnload fehlgeschlagen - + [PLUGIN] %s already loaded [PLUGIN] %s schon geladen - + [PLUGIN] Cannot find plugin: %s [PLUGIN] Kann Plugin nicht finden: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Fehler beim des Plugins: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] Dll-Export "pluginit" für Plugin: %s fehlt. - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] DLL-API 'pluginit' beim Plugin: %s meldet einen Fehler - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s ist inkompatibel mit dieser Version des SDK - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d geladen! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] GuiMenuAdd(%d) fehlgeschlagen für Plugin: %s - + [PLUGIN] %s unloaded [PLUGIN] %s entladen - + [PLUGIN] %s not found [PLUGIN] %s nicht gefunden - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] ungültiges Plugin Handle %d... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] Befehl "%s" konnte nicht registriert werden... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] Befehl "%s" registriert! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] Befehl "%s" Registrierung entfernt! - + [PLUGIN, %s] Command "%s" failed to unregister... [PLUGIN, %s] Befehl "%s" Registrierung konnte nicht entfernt werden... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [PLUGIN, %s] Ausdrucksfunktion "%s" konnte nicht registriert werden... - - + + [PLUGIN, %s] Expression function "%s" registered! [PLUGIN, %s] Ausdrucksfunktion "%s" registriert! - + [PLUGIN, %s] Expression function "%s" unregistered! [PLUGIN, %s] Ausdrucksfunktion "%s" entfernt! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] Ausdrucksfunktion "%s" konnte nicht registriert werden... - + [PLUGIN, %s] Format function "%s" failed to register... [PLUGIN, %s] Ausdrucksfunktion "%s" konnte nicht registriert werden... - + [PLUGIN, %s] Format function "%s" registered! [PLUGIN, %s] Formatierungsfunktion "%s" registriert! - + [PLUGIN, %s] Format function "%s" unregistered! [PLUGIN, %s] Formatierungsfunktion "%s" entfernt! - + [PLUGIN, %s] Format function "%s" failed to unregister... [PLUGIN, %s] Formatierungsfunktion "%s" konnte nicht registriert werden... @@ -10157,53 +10173,53 @@ Möchten Sie das Debuggen fortsetzen? - + Failed to add %s %s; Konnte %s %s nicht hinzufügen; - + Failed to add function %s %s() Konnte Funktion %s %s() nicht hinzufügen - + Failed to add enum %s - + Failed to add typedef %s %s; Fehler beim Hinzufügen von Typedef %s %s; - + Failed to add member %s %s.%s; Fehler beim Hinzufügen von Mitglied %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; Konnte Argument %s %s.%s nicht hinzufügen; @@ -14501,7 +14517,7 @@ Wollen Sie die Patches dennoch anwenden? RegistersView - + AVX-512 isn't supported on this computer. @@ -16221,90 +16237,90 @@ Die TEB kann verwendet werden, um eine Vielzahl von Informationen Wert - + &Follow address in Dump &Adresse im Dump anzeigen - + Follow value in Dump Wert im Dump folgen - + Follow value in Disassembler Wert im Disassembler anschauen - - + + Change address Adresse ändern - + Display type - - + + Load JSON JSON laden - - + + Parse header Header parsen - + Remove Entfernen - + Clear Löschen - + &Refresh Aktualisie&ren - + &Copy &Kopieren - + Error Fehler - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON-Dateien (*.json);;Alle Dateien (*.*) - + Header files (*.h *.hpp);;All files (*.*) Header-Dateien (*.h *.hpp);;Alle Dateien (*.*) diff --git a/x64dbg_el_GR.ts b/x64dbg_el_GR.ts index 1945334..5254b48 100644 --- a/x64dbg_el_GR.ts +++ b/x64dbg_el_GR.ts @@ -2600,67 +2600,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2705,250 +2705,229 @@ &Disassembly - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value Τροποποίησε τιμή - - - - - + + + + Error Σφάλμα - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! Σφάλμα! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3096,133 +3075,133 @@ CPURegistersView - + Modify value Τροποποίησε τιμή - + Increment value - + Decrement value - + Zero value - + Toggle Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error Σφάλμα - - + + Edit %1 - - - - - + + + + + Edit Επεξεργασία - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Ακολούθησε στο &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3888,260 +3867,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Toggle - - + + Edit Επεξεργασία - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Σημείο Διακοπής - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Σχόλιο - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + Σφάλμα + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4841,12 +4851,13 @@ - + + Actions @@ -5506,97 +5517,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference + Go to Next Reference + + + + Modify value Τροποποίησε τιμή - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6013,7 +6029,7 @@ - + Done! @@ -8188,28 +8204,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9521,147 +9537,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9883,49 +9899,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14187,7 +14203,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15865,90 +15881,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error Σφάλμα - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_es_ES.ts b/x64dbg_es_ES.ts index 5a4def3..02fdc6d 100644 --- a/x64dbg_es_ES.ts +++ b/x64dbg_es_ES.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Signed byte (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2695,250 +2695,229 @@ &Desensamblado - - Display type - - - - - + + System Code Código de sistema - + System Data Datos del sistema - - + + User Code Código de usuario - + User Data Datos de usuario - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTES) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String/Palabra) - + (Unknown String) (String/Palabra desconocida) - - - + + + Modify value Modificar valor - - - - - + + + + Error Error - - + + The input text is not a number! - + Enter expression to follow in Dump... Escriba la expresión a seguir en Volcado... - - + + Error! ¡Error! - + Not inside a module... La dirección no está en ningún módulo... - + Goto File Offset in %1 Ir a la posición del archivo %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Valor - - + + Comments Comentarios - + Edit data at %1 Editar datos en %1 - + Fill data at %1 Rellenar datos en %1 - + Save to file Guardar en archivo - + All files (*.*) Todos los archivos (*.*) - + Find Pattern... Buscar un patrón... - + Selection not in a file... La selección no está en ningún archivo... - + Dump Volcado - + Enter expression to sync with... Añadir expresión con la que sincronizar... - + Size Tamaño - + Warning Atención - + You're trying to allocate a zero-sized buffer just now. Estás intentando asignar un búfer de tamaño cero. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. El tamaño del búfer que intenta asignar sobrepasa 1GB. Por favor, verifica tu expresión para asegurarte de que todo es correcto. - + Memory allocation failed! La asignación de memoria ha fallado - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value Modificar valor - + Increment value - + Decrement value - + Zero value - + Toggle Conmutar - + Undo - + Follow in Disassembler Mostrar en el desensamblador - + Follow in Dump Mostrar en el volcado - + Follow in Stack Mostrar en la pila - + Follow in Memory Map Mostrar en el mapa de memoria - + &Remove hardware breakpoint - + Increment x87 Stack Incrementar pila x87 - + Decrement x87 Stack Decrementar pila x87 - + Highlight - + Error Error - - + + Edit %1 - - - - - + + + + + Edit Editar - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Mostrar en en &volcado - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3882,260 +3861,291 @@ CommonActions - + Follow in Disassembler Mostrar en el desensamblador - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Mostrar DWord en el desesamblador - + &Follow QWORD in Disassembler &Mostrar QWord en el desesamblador - + Follow in Dump Mostrar en el volcado - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Mostrar DWord en el volcado actual - + &Follow QWORD in Current Dump &Mostrar QWord en volcado actual - + Dump %1 Volcado %1 - + Follow DWORD in Dump Mostrar DWord en el volcado - + Follow QWORD in Dump Mostrar QWord en el volcado - + Follow in Stack Mostrar en la pila - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Mostrar en el mapa de memoria - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Gráfico - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Conmutar - - + + Edit Editar - - + + Set Hardware on Execution PI de hardware (al ejecutar) - + Remove Hardware Eliminar (hardware) - - - - + + + + Replace Slot %1 (Unknown) Reemplazar posición %1 (Desconocida) - + Breakpoint Punto de interrupción - + Set Conditional Breakpoint Añade Punto de Control Condicional - + Replace Slot %1 (0x%2) Reemplazar el breakpoint %1 (ocupado por 0x%2) - + Label Current Address Etiquetar la dirección actual - + Comment Comentario - + Toggle Bookmark Añadir/quitar marcador - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Poner %1 Aqui - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Crear un nuevo hilo aquí - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD &Monitorizar DWord - + &Watch QWORD &Monitorizar QWord - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. No se puede ir a %1. Dirección ilegal. - + Add label at Añadir etiqueta en - + The label may be in use La etiqueta debe estar en uso - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? La etiqueta "%1" puede ser una etiqueta existente o una expresión válida. Con tal etiqueta puede haber efectos no deseados. ¿Desea continuar? - - - + + + Error! ¡Error! - + DbgSetLabelAt failed! DbgSetLabelAt ha fallado - + Add comment at Añadir comentario en - + DbgSetCommentAt failed! DbgSetCommentAt ha fallado - + DbgSetBookmarkAt failed! DbgSetBookmarkAt ha fallado - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Poner aquí un punto de interrupción de software puede colgar el programa. ¿Quieres continuar? - + + Error + Error + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Establecer aquí el nuevo origen puede colgar el programa. ¿Quieres continuar? - + Creating new thread here may result in crash. Do you really want to continue? Crear un nuevo hilo aquí puede colgar el programa. ¿Quieres continuar? - + Argument for the new thread Argumento para el nuevo hilo @@ -4835,12 +4845,13 @@ - + + Actions Acciones @@ -5500,97 +5511,102 @@ + Display type + + + + Freeze the stack Congelar la pila - + Go to Base of Stack Frame Ir a la base de esta trama de la pila - + Go to Previous Stack Frame Ir a la anterior trama de la pila - + Go to Next Stack Frame Ir a la siguiente trama de la pila - + Go to Previous Reference Ir a la referencia anterior - + Go to Next Reference Ir a la siguiente referencia - + Modify value Modificar valor - + Watch DWORD/QWORD Ver DWORD/QWORD - + Copy File Offset Copiar Compensación de archivo - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NO ENCONTRADO EN LA CONFIGURACIÓN! @@ -6016,7 +6032,7 @@ - + Done! ¡Hecho! @@ -8307,29 +8323,29 @@ SizeofType ha fallado - + VisitType failed VisitType ha fallado - + RemoveType failed RemoveType ha fallado - + Type %s removed Tipo %s eliminado - + LoadTypes failed LoadTypes falló - + Types loaded Types cargado @@ -9688,160 +9704,160 @@ Do you want to continue debugging? StaticFileUnload ha fallado - + [PLUGIN] %s already loaded [PLUGIN] %s ya ha sido cargado - + [PLUGIN] Cannot find plugin: %s [PLUGIN] No se puede encontrar el plugin: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Error al cargar plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] plugin de exportación"pluginit" no se encuentra en Plugin: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] pluginit falló para el plugin: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s no es compatible con esta versión del SDK - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d cargado - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded [PLUGIN] %s descargado - + [PLUGIN] %s not found [PLUGIN] %s no encontrado - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] Identificador de plugin %d inválido... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] Comando "%s" no se puso registrar... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] ¡Comando "%s" registrado! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] ¡Comando "%s" sin registrar! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -10065,53 +10081,53 @@ Do you want to continue debugging? - + Failed to add %s %s; Error al agregar %s %s; - + Failed to add function %s %s() Error al añadir la función %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; Error al agregar typedef %s %s; - + Failed to add member %s %s.%s; Error al agregar miembros %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; Error al agregar argumento %s %s.%s; @@ -14401,7 +14417,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16079,90 +16095,90 @@ The TEB can be used to get a lot of information on the process without calling W Valor - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear Limpiar - + &Refresh &Actualizar - + &Copy &Copiar - + Error Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_fa_IR.ts b/x64dbg_fa_IR.ts index d6b9caa..39b1c4a 100644 --- a/x64dbg_fa_IR.ts +++ b/x64dbg_fa_IR.ts @@ -2591,67 +2591,67 @@ - + Signed byte (8-bit) (بایت علامت‌دار (۸بیتی - + Signed short (16-bit) (علامت‌دار کوتاه (۱۶بیتی - + Signed long (32-bit) (علامت‌دار بلند (۳۲بیتی - + Signed long long (64-bit) (علامت‌دار بلند طولانی (۶۴بیتی - + Unsigned byte (8-bit) (بایت بی‌علامت (۸بیتی - + Unsigned short (16-bit) (بی‌علامت کوتاه (۱۶بیتی - + Unsigned long (32-bit) (بی‌علامت بلند (۳۲بیتی - + Unsigned long long (64-bit) (بی‌علامت بلند طولانی (۶۴بیتی - + Hex short (16-bit) (حالت مبنای ۱۶ کوتاه (۱۶بیتی - + Hex long (32-bit) (حالت مبنای ۱۶ بلند (۳۲بیتی - + Hex long long (64-bit) (حالت مبنای ۱۶ بلند طولانی (۶۴بیتی @@ -2696,250 +2696,229 @@ کد ماشین تبدیل‌شده به &زبان نمادین - - Display type - - - - - + + System Code کد سیستم - + System Data داده‌های سیستم - - + + User Code کد کاربر - + User Data داده‌های کاربر - + (Real4) (واقعی۴) - + (Real8) (واقعی۸) - + (BYTE) (بایت) - + (WORD) (کلمه) - + (DWORD) (دوکلمه‌ای) - - + + (QWORD) (چهارکلمه‌ای) - + (String) (رشته) - + (Unknown String) (رشته‌ی نامعلوم) - - - + + + Modify value اصلاح مقدار - - - - - + + + + Error خطا - - + + The input text is not a number! متن واردشده عدد نیست! - + Enter expression to follow in Dump... ...عبارت را برای دنبال کردن درون داده‌ها وارد نمایید - - + + Error! !خطا - + Not inside a module... درون قطعه‌کدی نیست... - + Goto File Offset in %1 %1 رفتن به موقعیت‌های نشانی اضافی فایل در - - - - + + + + Hex حالت مبنای ۱۶ - - - + + + ASCII (ASCII) کاآتا - - - + + + UNICODE (UNICODE) رمزنویسه‌ی‌عمومی - + Float (32-bit) (اعشار (۳۲بیتی - + Double (64-bit) (اعشار دوبرابری (۶۴بیتی - + Long double (80-bit) (اعشار دوبرابری بلند (۸۰ - + Half float (16-bit) - - + + Value مقدار - - + + Comments یادداشت‌ها - + Edit data at %1 %1 ویرایش داده‌ها در - + Fill data at %1 %1 پُرسازی داده‌ها در - + Save to file ذخیره‌سازی درون فایل - + All files (*.*) (*.*) تمامی فایل‌ها - + Find Pattern... ...یافتن الگو - + Selection not in a file... انتخاب‌شده درون فایلی نیست... - + Dump داده‌ها - + Enter expression to sync with... ...عبارت را وارد نمایید برای همگام‌سازی با - + Size اندازه - + Warning اخطار - + You're trying to allocate a zero-sized buffer just now. شما در حال تلاش برای اختصاص دادن یک حافظه‌ی موقت ذخیره‌ساز با اندازه‌ی صفر هستید. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. اندازه‌ی حافظه‌ی موقت ذخیره‌سازی که می‌خواهید اختصاص دهید، بیش از ۱ گ‌ب است. لطفاً عبارت خود را برای حصول اطمینان از اشتباه نبودن چیزی، بررسی نمایید. - + Memory allocation failed! تخصیص حافظه موفقیت‌آمیز نبود! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3090,133 +3069,133 @@ CPURegistersView - + Modify value اصلاح مقدار - + Increment value - + Decrement value - + Zero value - + Toggle تغییر وضعیت - + Undo لغو آخرین عمل انجامی - + Follow in Disassembler دنبال کردن درون تبدیل‌گر کد ماشین به زبان نمادین - + Follow in Dump دنبال کردن درون داده‌ها - + Follow in Stack دنبال کردن درون پشته - + Follow in Memory Map دنبال کردن درون نگاشت حافظه - + &Remove hardware breakpoint &پاک‌سازی نقطه‌ی توقف سخت‌افزاری - + Increment x87 Stack x87 افزایش پشته‌ی - + Decrement x87 Stack x87 کاهش پشته‌ی - + Highlight برجسته‌سازی - + Error خطا - - + + Edit %1 - - - - - + + + + + Edit ویرایش - - + + Edit %1 register - + Edit FPU register (FPU) ویرایش ثبات ومم=واحد ممیز متغیرمکان - + ERROR CONVERTING TO HEX خطای تبدیل به حالت مبنای ۱۶ - + Set Last Error تنظیم خطای آخر - + Set Last Status تنظیم وضعیت آخر - + Follow in &Dump دنبال کردن درون &داده‌ها - + Copy old value: %1 %1 :نسخه‌برداری از مقدار قدیمی - + Set Hardware Breakpoint on %1 %1 تنظیم نقطه‌ی توقف سخت‌افزاری روی @@ -3883,261 +3862,292 @@ CommonActions - + Follow in Disassembler دنبال کردن درون تبدیل‌گر کد ماشین به زبان نمادین - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &دنبال کردن دوکلمه‌ای درون تبدیل‌گر کد ماشین به زبان نمادین - + &Follow QWORD in Disassembler &دنبال کردن چهارکلمه‌ای درون تبدیل‌گر کد ماشین به زبان نمادین - + Follow in Dump دنبال کردن درون داده‌ها - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &دنبال کردن دوکلمه‌ای درون داده‌های فعلی - + &Follow QWORD in Current Dump &دنبال کردن چهارکلمه‌ای درون داده‌های فعلی - + Dump %1 داده‌ها %1 - + Follow DWORD in Dump دنبال کردن دوکلمه‌ای درون داده‌ها - + Follow QWORD in Dump دنبال کردن چهارکلمه‌ای درون داده‌ها - + Follow in Stack دنبال کردن درون پشته - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map دنبال کردن درون نگاشت حافظه - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph نمودار رابطه‌ای - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle تغییر وضعیت - - + + Edit ویرایش - - + + Set Hardware on Execution تنظیم سخت‌افزار روی اجرا - + Remove Hardware پاک‌سازی سخت‌افزار - - - - + + + + Replace Slot %1 (Unknown) فضای اختصاص‌یافته‌ی جای‌گزین %1 (نامعلوم) - + Breakpoint نقطه‌ی توقف - + Set Conditional Breakpoint تنظیم نقطه‌ی توقف شرطی - + Replace Slot %1 (0x%2) (0x%2) فضای اختصاص‌یافته‌ی جای‌گزین %1 - + Label Current Address برچسب‌گذاری نشانی فعلی - + Comment یادداشت - + Toggle Bookmark تغییر وضعیت نشانه‌گذاری - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here ایجاد رشته‌ی جدید در این‌جا - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD &پایش دوکلمه‌ای - + &Watch QWORD &پایش چهارکلمه‌ای - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. نمی‌توان %1 را دنبال کرد. نشانی نامعتبر است. - + Add label at افزودن برچسب در l - + The label may be in use برچسب امکان دارد در حال استفاده باشد - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? برچسب «%1» امکان دارد برچسبی موجود یا عبارتی معتبر باشد. استفاده از چنین برچسبی ممکن است نتایج ناخواسته‌ای را در پی داشته باشد. آیا باز می‌خواهید ادامه دهید؟ - - - + + + Error! !خطا - + DbgSetLabelAt failed! DbgSetLabelAt (تنظیم برچسب درِ Dbg) موفقیت‌آمیز نبود! - + Add comment at افزودن یادداشت در l - + DbgSetCommentAt failed! DbgSetCommentAt (تنظیم یادداشت درِ Dbg) موفقیت‌آمیز نبود! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt (تنظیم نشانه‌گذاری درِ Dbg) موفقیت‌آمیز نبود! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? تنظیم نقطه‌ی توقف نرم‌افزار در این‌جا امکان دارد منجر به توقف برنامه شود. آیا واقعاً می‌خواهید ادامه دهید؟ - + + Error + خطا + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? تنظیم مبدأ جدید در این‌جا امکان دارد منجر به توقف برنامه شود. آیا واقعاً می‌خواهید ادامه دهید؟ - + Creating new thread here may result in crash. Do you really want to continue? ایجاد رشته‌ی جدید در این‌جا امکان دارد منجر به توقف برنامه شود. آیا واقعاً می‌خواهید ادامه دهید؟ - + Argument for the new thread نشانوند برای رشته‌ی جدید @@ -4837,12 +4847,13 @@ - + + Actions عملیات @@ -5502,97 +5513,102 @@ + Display type + + + + Freeze the stack ثابت‌سازی پشته - + Go to Base of Stack Frame رفتن به پایه‌ی زیرساخت پشته - + Go to Previous Stack Frame رفتن به زیرساخت پشته‌ی قبلی - + Go to Next Stack Frame رفتن به زیرساخت پشته‌ی بعدی - + Go to Previous Reference رفتن به ارجاع قبلی - + Go to Next Reference رفتن به ارجاع بعدی - + Modify value اصلاح مقدار - + Watch DWORD/QWORD پایش دوکلمه‌ای/چهارکلمه‌ای - + Copy File Offset نسخه‌برداری از موقعیت‌های نشانی اضافی فایل - + Start/Stop trace recording - + Copy -> Cropped Table نسخه‌برداری -> جدول کوتاه‌شده - + Copy -> Table نسخه‌برداری -> جدول - + Copy -> Line, To Log نسخه‌برداری -> خط، برای ثبت - + Copy -> Cropped Table, To Log نسخه‌برداری -> جدول کوتاه‌شده، برای ثبت - + Copy -> Table, To Log نسخه‌برداری -> جدول، برای ثبت - + Copy -> Export Table نسخه‌برداری -> خروجی‌گیری از جدول - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! در پیکربندی یافت نشد! @@ -6018,7 +6034,7 @@ - + Done! Done! @@ -8322,29 +8338,29 @@ SizeofType failed - + VisitType failed VisitType failed - + RemoveType failed RemoveType failed - + Type %s removed Type %s removed - + LoadTypes failed LoadTypes failed - + Types loaded Types loaded @@ -9733,169 +9749,169 @@ Do you want to continue debugging? StaticFileUnload failed - + [PLUGIN] %s already loaded [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded [PLUGIN] %s unloaded - + [PLUGIN] %s not found [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... [PLUGIN, %s] Format function "%s" failed to unregister... @@ -10134,53 +10150,53 @@ Do you want to continue debugging? - + Failed to add %s %s; Failed to add %s %s; - + Failed to add function %s %s() Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; Failed to add typedef %s %s; - + Failed to add member %s %s.%s; Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; Failed to add argument %s %s.%s; @@ -14479,7 +14495,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16170,90 +16186,90 @@ The TEB can be used to get a lot of information on the process without calling W Value - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address Change address - + Display type - - + + Load JSON Load JSON - - + + Parse header Parse header - + Remove Remove - + Clear Clear - + &Refresh &Refresh - + &Copy &نسخه‌برداری - + Error خطا - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_fi_FI.ts b/x64dbg_fi_FI.ts index e06db50..e1e9a50 100644 --- a/x64dbg_fi_FI.ts +++ b/x64dbg_fi_FI.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Etumerkillinen tavu (8-bittinen) - + Signed short (16-bit) Etumerkillinen short (16-bittinen) - + Signed long (32-bit) Etumerkillinen long (32-bittinen) - + Signed long long (64-bit) Etumerkillinen long long (64-bittinen) - + Unsigned byte (8-bit) Etumerkitön tavu (8-bittinen) - + Unsigned short (16-bit) Etumerkitön short (16-bittinen) - + Unsigned long (32-bit) Etumerkitön long (32-bittinen) - + Unsigned long long (64-bit) Etumerkitön long long (64-bittinen) - + Hex short (16-bit) Heksadesimaalinen short (16-bittinen) - + Hex long (32-bit) Heksadesimaalinen long (32-bittinen) - + Hex long long (64-bit) Heksadesimaalinen long long (64-bittinen) @@ -2695,250 +2695,229 @@ &Koodi - - Display type - - - - - + + System Code Järjestelmäkoodi - + System Data Järjestelmädata - - + + User Code Käyttäjäalueen koodi - + User Data Käyttäjäalueen data - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (TAVU) - + (WORD) (SANA) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (Merkkijono) - + (Unknown String) (Tuntematon merkkijono) - - - + + + Modify value Muokkaa arvoa - - - - - + + + + Error Virhe - - + + The input text is not a number! Syöteteksti ei ole numero! - + Enter expression to follow in Dump... Syötä lauseke, johon siirrytään muistivedoksessa... - - + + Error! Virhe! - + Not inside a module... Valinta ei ole moduulin sisällä... - + Goto File Offset in %1 Siirry tiedoston paikkaan kohteessa %1 - - - - + + + + Hex Heksadesimaalinen - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Liukuluku (32-bittinen) - + Double (64-bit) Double (64-bittinen) - + Long double (80-bit) Long double (80-bittinen) - + Half float (16-bit) - - + + Value Arvo - - + + Comments Kommentit - + Edit data at %1 Muokkaa dataa kohdassa %1 - + Fill data at %1 Täytä data kohdassa %1 - + Save to file Tallenna tiedostoon - + All files (*.*) Kaikki tiedostot (*.*) - + Find Pattern... Etsi kuvio... - + Selection not in a file... Valinta ei ole tiedostossa... - + Dump muistivedoksessa - + Enter expression to sync with... Syötä synkronoitava lauseke... - + Size Koko - + Warning Varoitus - + You're trying to allocate a zero-sized buffer just now. Yrität juuri nyt varata 0-kokoista puskuria. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Puskuri, jota yrität varata, on kooltaan yli 1 GB. Tarkista, onko lausekkeessasi virheitä. - + Memory allocation failed! Muistin varaaminen epäonnistui! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value Muokkaa arvoa - + Increment value - + Decrement value - + Zero value - + Toggle Vaihda tila - + Undo Kumoa - + Follow in Disassembler Siirry koodissa - + Follow in Dump Siirry muistivedoksessa - + Follow in Stack Siirry pinossa - + Follow in Memory Map Siirry muistikartassa - + &Remove hardware breakpoint &Poista laitteiston keskeytyskohta - + Increment x87 Stack Lisää x87-pinoa - + Decrement x87 Stack Vähennä x87-pinoa - + Highlight Korosta - + Error Virhe - - + + Edit %1 - - - - - + + + + + Edit Muokkaa - - + + Edit %1 register - + Edit FPU register Muokkaa liukulukuprosessorin rekisteriä - + ERROR CONVERTING TO HEX VIRHE MUUNTAESSA HEKSADESIMAALISEKSI - + Set Last Error Aseta viimeisin virhekoodi - + Set Last Status Aseta viimeisin tilakoodi - + Follow in &Dump Siirry &muistivedoksessa - + Copy old value: %1 Kopioi vanha arvo: %1 - + Set Hardware Breakpoint on %1 Aseta laitteistokeskeytyskohta kohtaan %1 @@ -3882,260 +3861,291 @@ CommonActions - + Follow in Disassembler Siirry koodissa - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Siirry DWORD:iin koodissa - + &Follow QWORD in Disassembler &Siirry QWORD:iin koodissa - + Follow in Dump Siirry muistivedoksessa - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Siirry DWORD:iin nykyisessä muistivedoksessa - + &Follow QWORD in Current Dump &Siirry QWORD:iin nykyisessä muistivedoksessa - + Dump %1 Muistivedos %1 - + Follow DWORD in Dump Siirry DWORD:iin muistivedoksessa - + Follow QWORD in Dump Siirry QWORD:iin muistivedoksessa - + Follow in Stack Siirry pinossa - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Siirry muistikartassa - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Kaavio - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Vaihda tila - - + + Edit Muokkaa - - + + Set Hardware on Execution Aseta suorituksen laitteistokeskeytyskohta - + Remove Hardware Poista laitteistokeskeytyskohta - - - - + + + + Replace Slot %1 (Unknown) Korvaa paikka %1 (tuntematon) - + Breakpoint Keskeytyskohta - + Set Conditional Breakpoint Aseta ehdollinen keskeytyskohta - + Replace Slot %1 (0x%2) Korvaa paikka %1 (0x%2) - + Label Current Address Nimeä tämä osoite - + Comment Kommentti - + Toggle Bookmark Lisää/poista kirjanmerkki - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Aseta %1 tähän - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Luo uusi säie tähän - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD &Tarkkaile DWORD:ia - + &Watch QWORD &Tarkkaile QWORD:ia - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Ei voi siirtyä kohtaan %1. Osoite ei kelpaa. - + Add label at Lisää nimike kohtaan - + The label may be in use Nimike voi olla jo käytössä - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Nimike "%1" voi olla jo käytössä, tai se ei ole kelvollinen. Sellaisen nimikkeen käyttämisellä voi olla ei-toivottuja vaikutuksia. Haluatko silti jatkaa? - - - + + + Error! Virhe! - + DbgSetLabelAt failed! DbgSetLabelAt epäonnistui! - + Add comment at Lisää kommentti kohtaan - + DbgSetCommentAt failed! DbgSetCommentAt epäonnistui! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt epäonnistui! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Ohjelmistokeskeytyskohdan laittaminen tähän voi aiheuttaa ohjelman kaatumisen. Haluatko todella jatkaa? - + + Error + Virhe + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Uuden alkupisteen laittaminen tähän voi aiheuttaa ohjelman kaatumisen. Haluatko todella jatkaa? - + Creating new thread here may result in crash. Do you really want to continue? Uuden säikeen luominen tähän voi aiheuttaa ohjelman kaatumisen. Haluatko todella jatkaa? - + Argument for the new thread Argumentti uudelle säikeelle @@ -4835,12 +4845,13 @@ - + + Actions Toiminnot @@ -5500,97 +5511,102 @@ + Display type + + + + Freeze the stack Jäädytä pino - + Go to Base of Stack Frame Siirry pinokehyksen alkuun - + Go to Previous Stack Frame Siirry edelliseen pinokehykseen - + Go to Next Stack Frame Siirry seuraavaan pinokehykseen - + Go to Previous Reference Siirry edelliseen viittaukseen - + Go to Next Reference Siirry seuraavaan viittaukseen - + Modify value Muokkaa arvoa - + Watch DWORD/QWORD Tarkkaile DWORD:ia/QWORD:ia - + Copy File Offset Kopioi paikka tiedostossa - + Start/Stop trace recording Aloita/lopeta suorituksen jäljitystallennus - + Copy -> Cropped Table Kopioi -> Rajattu taulukko - + Copy -> Table Kopioi -> Taulukko - + Copy -> Line, To Log Kopioi -> Rivi, lokiin - + Copy -> Cropped Table, To Log Kopioi -> Rajattu taulukko, lokiin - + Copy -> Table, To Log Kopioi -> Taulukko, lokiin - + Copy -> Export Table Kopioi -> Vie taulukko - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! EI LÖYDY ASETUKSISTA! @@ -6013,7 +6029,7 @@ - + Done! Valmis! @@ -8314,29 +8330,29 @@ SizeofType epäonnistui - + VisitType failed VisitType epäonnistui - + RemoveType failed RemoveType epäonnistui - + Type %s removed Type %s poistettu - + LoadTypes failed LoadTypes epäonnistui - + Types loaded Tyypit ladattu @@ -9719,169 +9735,169 @@ Haluatko jatkaa virheenjäljitystä? StaticFileUnload epäonnistui - + [PLUGIN] %s already loaded [LIITÄNNÄINEN] %s on jo ladattu - + [PLUGIN] Cannot find plugin: %s [LIITÄNNÄINEN] Liitännäistä ei löydy: %s - + [PLUGIN] Failed to load plugin: %s [LIITÄNNÄINEN] Liitännäisen lataaminen epäonnistui: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [LIITÄNNÄINEN] Vietyä komentoa "pluginit" ei löydy liitännäisestä: %s - + [PLUGIN] pluginit failed for plugin: %s [LIITÄNNÄINEN] pluginit-epäonnistui liitännäisellä: %s - + [PLUGIN] %s is incompatible with this SDK version [LIITÄNNÄINEN] %s ei ole yhteensopiva tämän SDK-version kanssa - + [PLUGIN] %s v%d Loaded! [LIITÄNNÄINEN] %s v%d ladattu! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [LIITÄNNÄINEN] GuiMenuAdd(%d) epäonnistui liitännäisellä: %s - + [PLUGIN] %s unloaded [LIITÄNNÄINEN] %s:n lataus poistui - + [PLUGIN] %s not found [LIITÄNNÄINEN] %s ei löydy - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [LIITÄNNÄINEN] Liitännäisen kahva %d ei kelpaa... - + [PLUGIN, %s] Command "%s" failed to register... [LIITÄNNÄINEN, %s] Komennon "%s" rekisteröinti epäonnistui... - + [PLUGIN, %s] Command "%s" registered! [LIITÄNNÄINEN, %s] Komento "%s" rekisteröity! - + [PLUGIN, %s] Command "%s" unregistered! [LIITÄNNÄINEN, %s] Komento "%s" poistettu rekisteristä! - + [PLUGIN, %s] Command "%s" failed to unregister... [LIITÄNNÄINEN, %s] Komennon "%s" poistaminen rekisteristä epäonnistui... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [LIITÄNNÄINEN, %s] Lausekefunktion "%s" rekisteröinti epäonnistui... - - + + [PLUGIN, %s] Expression function "%s" registered! [LIITÄNNÄINEN, %s] Lausekefunktio "%s" rekisteröity! - + [PLUGIN, %s] Expression function "%s" unregistered! [LIITÄNNÄINEN, %s] Lausekefunktio "%s" poistettu rekisteristä! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [LIITÄNNÄINEN, %s] Lausekefunktion "%s" poisto rekisteristä epäonnistui... - + [PLUGIN, %s] Format function "%s" failed to register... [LIITÄNNÄINEN, %s] Muotoilufunktion "%s" rekisteröinti epäonnistui... - + [PLUGIN, %s] Format function "%s" registered! [LIITÄNNÄINEN, %s] Muotoilufunktio "%s" rekisteröity! - + [PLUGIN, %s] Format function "%s" unregistered! [LIITÄNNÄINEN, %s] Muotoilufunktio "%s" poistettu rekisteristä! - + [PLUGIN, %s] Format function "%s" failed to unregister... [LIITÄNNÄINEN, %s] Muotoilufunktion "%s" rekisteröinnin poisto epäonnistui... @@ -10120,49 +10136,49 @@ Haluatko jatkaa virheenjäljitystä? - + Failed to add %s %s; Kohteen %s %s lisääminen epäonnistui; - + Failed to add function %s %s() Funktion %s %s() lisääminen epäonnistui - + Failed to add enum %s - + Failed to add typedef %s %s; Tyyppimäärityksen %s %s lisääminen epäonnistui; - + Failed to add member %s %s.%s; Jäsenen %s %s.%s lisääminen epäonnistui; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; Argumentin %s %s.%s lisääminen epäonnistui; @@ -14448,7 +14464,7 @@ Haluatko silti toteuttaa nämä muutokset? RegistersView - + AVX-512 isn't supported on this computer. @@ -16150,90 +16166,90 @@ TEB:n avulla voi kerätä paljon tietoa prosessista kutsumatta Win32-rajapinnan Arvo - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address Vaihda osoitetta - + Display type - - + + Load JSON Lataa JSON - - + + Parse header Jäsennä otsake - + Remove Poista - + Clear Tyhjennä - + &Refresh &Päivitä - + &Copy &Kopioi - + Error Virhe - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON-tiedostot (*.json);;Kaikki tiedostot (*.*) - + Header files (*.h *.hpp);;All files (*.*) Otsaketiedostot (*.h *.hpp);;Kaikki tiedostot (*.*) diff --git a/x64dbg_fil_PH.ts b/x64dbg_fil_PH.ts index 24195b1..e0bb241 100644 --- a/x64dbg_fil_PH.ts +++ b/x64dbg_fil_PH.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Nilagdaan na byte (8-bit) - + Signed short (16-bit) Nilagdaan ng maikli (16-bit) - + Signed long (32-bit) Nilagdaan ng mahaba (32-bit) - + Signed long long (64-bit) Nilagdaan ng mahang mahaba (64-bit) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Hindi Nilagdaan maliit (16-bit) - + Unsigned long (32-bit) Hindi Nilagdaan mahaba (32-bit) - + Unsigned long long (64-bit) Nilagdaan ng mahang mahaba (64-bit) - + Hex short (16-bit) Hex maikli (16-bit) - + Hex long (32-bit) Hex mahaba (32-bit) - + Hex long long (64-bit) Hex mahabang haba (64-bit) @@ -2695,250 +2695,229 @@ &Disassembly - - Display type - - - - - + + System Code Kode ng Sistema - + System Data Data ng Sistema - - + + User Code User Code - + User Data User Data - + (Real4) (Totoo4) - + (Real8) (Totoo8) - + (BYTE) (BYTE) - + (WORD) (SALITA) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Unknown String) - - - + + + Modify value Baguhin ang Halaga - - - - - + + + + Error Error - - + + The input text is not a number! - + Enter expression to follow in Dump... Ipasok ang pagpapahayag para sundan sa Dup... - - + + Error! Error! - + Not inside a module... Hindi sa loob ng isang modyul... - + Goto File Offset in %1 Pumunta sa File Offset sa %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Lumilitaw (32-bit) - + Double (64-bit) Doble (64-bit) - + Long double (80-bit) Mataas ang doble (80-bit) - + Half float (16-bit) - - + + Value Halaga - - + + Comments Kumento - + Edit data at %1 I-Edit ang data %1 - + Fill data at %1 Punan ang data at %1 - + Save to file I-save patungo sa file - + All files (*.*) Lahat ng Files (*. *) - + Find Pattern... Hanapin ang pattern... - + Selection not in a file... Pagpili na hindi kasali sa file... - + Dump Tapon - + Enter expression to sync with... Ipasok ang pahayag papunta sa sync may... - + Size Sukat - + Warning Babala - + You're trying to allocate a zero-sized buffer just now. Sinikap mong mag laan ng isang zero-sized buffer ngayon lang. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Ang laki ng buffer na sinisikap mong inilaan ay lumagpas sa 1GB. Pakiusap tingnan ang iyong pahayag para masigurado na walang mali. - + Memory allocation failed! Inilaang Memorya failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value Baguhin ang Halaga - + Increment value - + Decrement value - + Zero value - + Toggle Palipat-lipat - + Undo - + Follow in Disassembler Sumunod sa Disassembler - + Follow in Dump Sundin sa Pagtapon - + Follow in Stack Sumunod sa Stack - + Follow in Memory Map Sundan ang mapa ng memorya - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Sundin sa &Tapon - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3882,260 +3861,291 @@ CommonActions - + Follow in Disassembler Sumunod sa Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Sundin ang DWORD sa Disassembler - + &Follow QWORD in Disassembler &Sundin ang QWORD sa Disassembler - + Follow in Dump Sundin sa Pagtapon - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack Sumunod sa Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Sundan ang mapa ng memorya - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Palipat-lipat - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address Tatak ng kasalukuyang address - + Comment Kumento - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Lumikha ng Bagong Thread dito - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at Magdagdag ng tatak sa - + The label may be in use Ang tatak ay maaring ginagamit - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Ang tatak "%1" ay maaring umiiral na tatak o valid na ekspresyon. Gamit ang naturang tatak baka may hindi inaasahan mga epekto. Gusto mo parin bang magpatuloy? - - - + + + Error! Error! - + DbgSetLabelAt failed! Nabigo ang DbgSetLabelA! - + Add comment at Magdagdag ng komento sa - + DbgSetCommentAt failed! Nabigo ang DbgSetCommentA! - + DbgSetBookmarkAt failed! Nabigo ang DbgSetBookmarkAt! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + Error + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4835,12 +4845,13 @@ - + + Actions Mga aksiyon @@ -5500,97 +5511,102 @@ + Display type + + + + Freeze the stack I-freeze ang stack - + Go to Base of Stack Frame Pumunta sa kampo ng Stack na Frame - + Go to Previous Stack Frame Pumuta sa Nakaraang Stack na Frame - + Go to Next Stack Frame Pumta sa sunod na Stack na Frame - + Go to Previous Reference - + Go to Next Reference - + Modify value Baguhin ang Halaga - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! HINDI MATATAGPUAN SA KONPIG! @@ -6007,7 +6023,7 @@ - + Done! @@ -8182,28 +8198,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9515,147 +9531,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9877,49 +9893,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14181,7 +14197,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15859,90 +15875,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy &Kopyahin - + Error Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_fr_FR.ts b/x64dbg_fr_FR.ts index 0c8259b..e8ec647 100644 --- a/x64dbg_fr_FR.ts +++ b/x64dbg_fr_FR.ts @@ -2592,67 +2592,67 @@ - + Signed byte (8-bit) Octet signé (8 bits) - + Signed short (16-bit) Court signé (16 bits) - + Signed long (32-bit) Long signé (32 bits) - + Signed long long (64-bit) Long long signé (64 bits) - + Unsigned byte (8-bit) Octet non signé (8 bits) - + Unsigned short (16-bit) Court non signé (16 bits) - + Unsigned long (32-bit) Long non-signé (32-bit) - + Unsigned long long (64-bit) long long non-signé (64-bit) - + Hex short (16-bit) Hexa court (16 bits) - + Hex long (32-bit) Hexa long (32 bits) - + Hex long long (64-bit) Hexa long long (64-bit) @@ -2697,250 +2697,229 @@ Vue Désassembleur - - Display type - - - - - + + System Code Code système - + System Data Données système - - + + User Code Code utilisateur - + User Data Données Utilisateur - + (Real4) (Réel4) - + (Real8) (Réel8) - + (BYTE) (OCTET) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (Chaîne) - + (Unknown String) (Chaîne inconnue) - - - + + + Modify value Modifier la valeur - - - - - + + + + Error Erreur - - + + The input text is not a number! Le texte d'entrée n'est pas un nombre ! - + Enter expression to follow in Dump... Entrez l'expression à suivre dans Dump... - - + + Error! Erreur! - + Not inside a module... Ne fait pas partie d'un module... - + Goto File Offset in %1 Aller à l'Offset du Fichier dans %1 - - - - + + + + Hex Hexa - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Point Flottant (32-bit) - + Double (64-bit) Double (64 bits) - + Long double (80-bit) Long double (80 bits) - + Half float (16-bit) - - + + Value Valeur - - + + Comments Commentaires - + Edit data at %1 Modifier les données à %1 - + Fill data at %1 Remplir les données à %1 - + Save to file Sauvegarder dans un fichier - + All files (*.*) Tous les fichiers (*.*) - + Find Pattern... Rechercher patron... - + Selection not in a file... La sélection n'est pas dans un fichier... - + Dump Vue Hexa - + Enter expression to sync with... Entrez une expression à synchroniser avec... - + Size Taille - + Warning Attention - + You're trying to allocate a zero-sized buffer just now. Vous avez essayé d’allouer une buffer de taille vide. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. La taille de mémoire tampon que vous essayez d’attribuer est supérieure à 1 Go. S’il vous plaît vérifier votre expression pour s’assurer que tout va bien. - + Memory allocation failed! Allocation mémoire a échoué ! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3088,133 +3067,133 @@ CPURegistersView - + Modify value Modifier la valeur - + Increment value - + Decrement value - + Zero value - + Toggle Activer/désactiver - + Undo Annuler - + Follow in Disassembler Suivre dans le Désassembleur - + Follow in Dump Suivre dans la vue Hexa - + Follow in Stack Suivre dans la pile - + Follow in Memory Map Suivre dans la cartographie mémoire - + &Remove hardware breakpoint &Supprimer le point d'arrêt matériel - + Increment x87 Stack Incrémenter la pile x87 - + Decrement x87 Stack Décrémenter la pile x87 - + Highlight Mettre en surbrillance - + Error Erreur - - + + Edit %1 - - - - - + + + + + Edit Modifier - - + + Edit %1 register - + Edit FPU register Éditer le registre FPU - + ERROR CONVERTING TO HEX Erreur lors de la conversion en hexadécimal - + Set Last Error Définir la dernière erreur - + Set Last Status Définir le dernier statut - + Follow in &Dump Suivre dans la vue Hexa - + Copy old value: %1 Copier l'ancienne valeur : %1 - + Set Hardware Breakpoint on %1 Point d'arrêt matériel défini sur %1 @@ -3881,260 +3860,291 @@ CommonActions - + Follow in Disassembler Suivre dans le Désassembleur - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Suivre DWORD dans le Désassembleur - + &Follow QWORD in Disassembler &Suivre QWORD dans le Désassembleur - + Follow in Dump Suivre dans la vue Hexa - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Suivre le DWORD dans la vue Hexa Courante - + &Follow QWORD in Current Dump &Suivre le QWORD dans la vue Hexa Courante - + Dump %1 Vue Hexa %1 - + Follow DWORD in Dump &Suivre le DWORD dans la vue Hexa - + Follow QWORD in Dump &Suivre le QWORD dans la vue Hexa - + Follow in Stack Suivre dans la pile - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Suivre dans la cartographie mémoire - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Graphe - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Activer/désactiver - - + + Edit Modifier - - + + Set Hardware on Execution Mettre point d'arrêt matériel sur Exécution - + Remove Hardware Supprimer Matériel - - - - + + + + Replace Slot %1 (Unknown) Remplacer l'emplacement %1 (inconnu) - + Breakpoint Point d’arrêt - + Set Conditional Breakpoint Définir un point d'arrêt conditionnel - + Replace Slot %1 (0x%2) Remplacer l’emplacement %1 (0x%2) - + Label Current Address Étiqueter l'Adresse Courante - + Comment Commentaire - + Toggle Bookmark Basculer le marque page - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Définir %1 ici - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Créer un nouveau thread ici - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD &Monitorer DWORD - + &Watch QWORD &Monitorer QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Impossible de suivre %1. L'adresse est invalide. - + Add label at Ajouter étiquette à l'adresse - + The label may be in use L'étiquette peut être utilisée - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? L'étiquette "%1" peut être une étiquette existante ou une expression valide. L'utilisation de cette étiquette peut avoir des effets indésirables. Voulez-vous continuer ? - - - + + + Error! Erreur! - + DbgSetLabelAt failed! DbgSetLabelAt a échoué! - + Add comment at Ajouter un commentaire à l'adresse - + DbgSetCommentAt failed! DbgSetCommentAt a échoué ! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt a échoué ! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Définir un point d'arrêt logiciel ici peut entraîner un crash. Voulez-vous vraiment continuer ? - + + Error + Erreur + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Définir une nouvelle origine ici peut entraîner un crash. Voulez-vous vraiment continuer ? - + Creating new thread here may result in crash. Do you really want to continue? La création d'un nouveau fil de discussion ici peut entraîner un crash. Voulez-vous vraiment continuer ? - + Argument for the new thread Argument pour le nouveau thread @@ -4834,12 +4844,13 @@ - + + Actions Actions @@ -5499,97 +5510,102 @@ + Display type + + + + Freeze the stack Geler la pile - + Go to Base of Stack Frame Aller au contexte initial - + Go to Previous Stack Frame Aller au contexte précédent - + Go to Next Stack Frame Aller au contexte suivant - + Go to Previous Reference Aller à la référence précédente - + Go to Next Reference Aller à la référence suivante - + Modify value Modifier la valeur - + Watch DWORD/QWORD Monitorer DWORD/QWORD - + Copy File Offset Copier l'offset du fichier - + Start/Stop trace recording Démarrer/Arrêter l'enregistrement de trace - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! INTROUVABLE DANS LA CONFIGURATION ! @@ -6013,7 +6029,7 @@ - + Done! Terminé ! @@ -8259,28 +8275,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9592,147 +9608,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9954,49 +9970,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14263,7 +14279,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15941,90 +15957,90 @@ The TEB can be used to get a lot of information on the process without calling W Valeur - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh &Rafraichir - + &Copy &Copier - + Error Erreur - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) Fichiers JSON (*.json);;Tous les fichiers (*.*) - + Header files (*.h *.hpp);;All files (*.*) Fichiers d'en-tête (*.h *.hpp);;Tous les fichiers (*.*) diff --git a/x64dbg_he_IL.ts b/x64dbg_he_IL.ts index 8792441..03229d7 100644 --- a/x64dbg_he_IL.ts +++ b/x64dbg_he_IL.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ &דיסאסמבלי - - Display type - - - - - + + System Code קוד מערכת - + System Data נתוני המערכת - - + + User Code קוד משתמש - + User Data נתוני משתמש - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (בית) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (מחרוזת) - + (Unknown String) - - - + + + Modify value שנה ערך - - - - - + + + + Error שגיאה - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! שגיאה! - + Not inside a module... לא בתוך מודול... - + Goto File Offset in %1 לך אל היסט הקובץ ב %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE יוניקוד - + Float (32-bit) Float (32-ביט) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value ערך - - + + Comments הערות - + Edit data at %1 - + Fill data at %1 - + Save to file שמור לקובץ - + All files (*.*) כל סוגי הקבצים (*.*)‏ - + Find Pattern... - + Selection not in a file... - + Dump Dump - + Enter expression to sync with... - + Size גודל - + Warning אזהרה - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! הקצאת זיכרון נכשלה! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value שנה ערך - + Increment value - + Decrement value - + Zero value - + Toggle החלף מצב - + Undo בטל - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error שגיאה - - + + Edit %1 - - - - - + + + + + Edit עריכה - - + + Edit %1 register - + Edit FPU register ערוך רגיסטר FPU - + ERROR CONVERTING TO HEX שגיאה בהמרה לHEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph גרף - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle החלף מצב - - + + Edit עריכה - - + + Set Hardware on Execution - + Remove Hardware הסר חומרה - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint נקודת עצירה - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment הערה - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD &לצפות בDWORD - + &Watch QWORD &לצפות בQWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at הוסף תווית ב - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! שגיאה! - + DbgSetLabelAt failed! DbgSetLabelAt נכשל! - + Add comment at הוסף הערה ב - + DbgSetCommentAt failed! DbgSetCommentAt נכשל! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt נכשל! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + שגיאה + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions פעולות @@ -5495,97 +5506,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame + Go to Previous Reference + + + + Go to Next Reference לך להפניה הבאה - + Modify value שנה ערך - + Watch DWORD/QWORD - + Copy File Offset העתק היסט הקובץ - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table העתק -> טבלה - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table העתק -> יצא טבלה - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6003,7 +6019,7 @@ - + Done! בוצע! @@ -8180,28 +8196,28 @@ SizeofType נכשל - + VisitType failed VisitType נכשל - + RemoveType failed RemoveType נכשל - + Type %s removed הסוג %s הוסר - + LoadTypes failed LoadTypes נכשל - + Types loaded @@ -9516,150 +9532,150 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded [PLUGIN] %s כבר נטען - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d נטען! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded [PLUGIN] טעינת %s בוטלה - + [PLUGIN] %s not found [PLUGIN] %s לא נמצא - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9883,49 +9899,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14192,7 +14208,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15870,90 +15886,90 @@ The TEB can be used to get a lot of information on the process without calling W ערך - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON טען JSON - - + + Parse header - + Remove הסר - + Clear ניקוי - + &Refresh &רענן - + &Copy &העתק - + Error שגיאה - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_hi_IN.ts b/x64dbg_hi_IN.ts index c5f4f8c..938ab9e 100644 --- a/x64dbg_hi_IN.ts +++ b/x64dbg_hi_IN.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_hu_HU.ts b/x64dbg_hu_HU.ts index 0ce58d0..2b0cbb2 100644 --- a/x64dbg_hu_HU.ts +++ b/x64dbg_hu_HU.ts @@ -2591,67 +2591,67 @@ mrfearless - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2696,250 +2696,229 @@ mrfearless - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! Hiba! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value Érték - - + + Comments Megjegyzések - + Edit data at %1 - + Fill data at %1 - + Save to file Mentés fájlba - + All files (*.*) Minden fájl (*.*) - + Find Pattern... - + Selection not in a file... - + Dump Kiírás fájlba - + Enter expression to sync with... - + Size Méret - + Warning Figyelmeztetés - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3087,133 +3066,133 @@ mrfearless CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo Visszavonás - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit Szerkesztés - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3879,260 +3858,291 @@ mrfearless CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Töréspont - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Megjegyzés - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! Hiba! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4832,12 +4842,13 @@ mrfearless - + + Actions @@ -5497,97 +5508,102 @@ mrfearless - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6004,7 +6020,7 @@ mrfearless - + Done! Kész! @@ -8179,28 +8195,28 @@ mrfearless - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9512,147 +9528,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9874,49 +9890,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14178,7 +14194,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15858,90 +15874,90 @@ a TEB lehet hozzászokott kap egy csomó információt a folyamat a Win32 API h - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_id_ID.ts b/x64dbg_id_ID.ts index 82f95a2..c079a58 100644 --- a/x64dbg_id_ID.ts +++ b/x64dbg_id_ID.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Komentar - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_it_IT.ts b/x64dbg_it_IT.ts index dca89fe..53ea22b 100644 --- a/x64dbg_it_IT.ts +++ b/x64dbg_it_IT.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Byte con segno (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Byte senza segno (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2695,250 +2695,229 @@ &Disassembly - - Display type - - - - - + + System Code Codice di sistema - + System Data Dati di sistema - - + + User Code Codice dell'utente - + User Data Dati dell'utente - + (Real4) - + (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (Stringa) - + (Unknown String) (Stringa Sconosciuta) - - - + + + Modify value Modifica valore - - - - - + + + + Error Errore - - + + The input text is not a number! Il testo inserito non è un numero! - + Enter expression to follow in Dump... Inserire l'espressione da seguire nel Dump... - - + + Error! Errore! - + Not inside a module... Non all'interno del modulo... - + Goto File Offset in %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Valore - - + + Comments Commenti - + Edit data at %1 Modificare i dati a %1 - + Fill data at %1 Riempi dati a %1 - + Save to file Salva sul file - + All files (*.*) Tutti i file (*.*) - + Find Pattern... Trova pattern... - + Selection not in a file... Selezione non è in un file... - + Dump Dump - + Enter expression to sync with... - + Size Dimensioni - + Warning Avviso - + You're trying to allocate a zero-sized buffer just now. Si sta tentando di allocare un buffer con dimensione zero. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. La dimensione del buffer che si sta tentando di allocare supera 1GB. Si prega di controllare l'espressione per essere certi di non commettere errori. - + Memory allocation failed! Allocazione di memoria non riuscita! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3086,133 +3065,133 @@ CPURegistersView - + Modify value Modifica valore - + Increment value - + Decrement value - + Zero value - + Toggle Interruttore - + Undo - + Follow in Disassembler Visualizza nel Disassembler - + Follow in Dump Visualizza in Dump - + Follow in Stack Visualizza nello Stack - + Follow in Memory Map Segui in Mappa Memoria - + &Remove hardware breakpoint &Rimuovi breakpoint hardware - + Increment x87 Stack Incrementa Stack x87 - + Decrement x87 Stack Decrementa Stack x87 - + Highlight Evidenzia - + Error Errore - - + + Edit %1 - - - - - + + + + + Edit Modifica - - + + Edit %1 register - + Edit FPU register Modifica registro FPU - + ERROR CONVERTING TO HEX ERRORE NEL CONVERTIRE IN HEX - + Set Last Error Imposta ultimo errore - + Set Last Status Imposta ultimo status - + Follow in &Dump &Visualizza in Dump - + Copy old value: %1 Copia vecchio valore: %1 - + Set Hardware Breakpoint on %1 Imposta breakpoint hardware su %1 @@ -3878,261 +3857,292 @@ CommonActions - + Follow in Disassembler Visualizza nel Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Visualizza DWORD nel Disassembler - + &Follow QWORD in Disassembler &Visualizza QWORD nel Disassembler - + Follow in Dump Visualizza in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Visualizza DWORD nel Dump corrente - + &Follow QWORD in Current Dump &Visualizza QWORD nel Disassembler - + Dump %1 Dump %1 - + Follow DWORD in Dump Segui DWORD nel Dump - + Follow QWORD in Dump Segui QWORD nel Dump - + Follow in Stack Visualizza nello Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Segui in Mappa Memoria - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Grafico - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Interruttore - - + + Edit Modifica - - + + Set Hardware on Execution Setta Hardware in esecuzione - + Remove Hardware Rimuovi hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Punto di rottura - + Set Conditional Breakpoint Imposta Breakpoint Condizionale - + Replace Slot %1 (0x%2) - + Label Current Address Etichetta indirizzo corrente - + Comment Commento - + Toggle Bookmark Rimuovi Segnalibro - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". Aggiungi un segnalibro qui, o rimuovi un segnalibro. Comando equivalente "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Imposta %1 qui - + Set the next executed instruction to this address. Equivalent command "mov cip, address". Imposta la prossima istruzione da eseguire a questo indirizzo. Comando equivalente "mov cip, address". - + Create New Thread Here Crea nuovo thread qui - + Create a new thread at this address. Equivalent command "createthread address, argument". Crea un nuovo thread a questo indirizzo. Comando equivalente "createthread address, argument". - + &Watch DWORD &Watch DWORD - + &Watch QWORD &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". Aggiungi l'indirizzo nella vista di osservazione. Comando equivalente "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Impossibile seguire %1. L'indirizzo non è valido. - + Add label at Aggiungi etichetta a - + The label may be in use L'etichetta può essere in uso - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? L'etichetta "%1" può essere un'etichetta esistente o un'espressione valida. L'uso di tale etichetta potrebbe avere effetti indesiderati. Vuoi ancora continuare? - - - + + + Error! Errore! - + DbgSetLabelAt failed! DbgSetLabelAt fallito! - + Add comment at Aggiungi commento a - + DbgSetCommentAt failed! DbgSetCommentAt fallito! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt fallito! - + Address %1 is not executable L'indirizzo %1 non è eseguibile - + Setting software breakpoint here may result in crash. Do you really want to continue? Impostare il punto d'interruzione del software qui, potrebbe risultare in un crash. Vuoi davvero continuare? - + + Error + Errore + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Impostare una nuova origine qui, potrebbe risultare in un crash. Vuoi davvero continuare? - + Creating new thread here may result in crash. Do you really want to continue? Creare un nuovo thread qui, potrebbe risultare in un crash. Vuoi davvero continuare? - + Argument for the new thread Argomento per il nuovo thread @@ -4832,12 +4842,13 @@ - + + Actions Azioni @@ -5497,97 +5508,102 @@ + Display type + + + + Freeze the stack Congela lo stack - + Go to Base of Stack Frame - + Go to Previous Stack Frame - + Go to Next Stack Frame - + Go to Previous Reference - + Go to Next Reference - + Modify value Modifica valore - + Watch DWORD/QWORD Guarda DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NON TROVATO NELLA CONFIGURAZIONE! @@ -6005,7 +6021,7 @@ - + Done! Fatto! @@ -8197,28 +8213,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9530,147 +9546,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9894,49 +9910,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14203,7 +14219,7 @@ Si desidera applicare queste patch comunque? RegistersView - + AVX-512 isn't supported on this computer. @@ -15881,90 +15897,90 @@ The TEB can be used to get a lot of information on the process without calling W Valore - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh &Aggiorna - + &Copy &Copia - + Error Errore - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ja_JP.ts b/x64dbg_ja_JP.ts index cbf7c1c..c353857 100644 --- a/x64dbg_ja_JP.ts +++ b/x64dbg_ja_JP.ts @@ -2593,67 +2593,67 @@ - + Signed byte (8-bit) Signed byte (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) 16進数 short (16-bit) - + Hex long (32-bit) 16進数 long(32-bit) - + Hex long long (64-bit) 16進数 long long(64-bit) @@ -2698,250 +2698,229 @@ 逆アセンブル(&D) - - Display type - 表示タイプ - - - - + + System Code システムコード - + System Data システムデータ - - + + User Code ユーザーコード - + User Data ユーザーデータ - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Unknown String) - - - + + + Modify value 値を変更 - - - - - + + + + Error エラー - - + + The input text is not a number! 入力テキストは数字ではありません！ - + Enter expression to follow in Dump... ダンプ画面で追跡する式を入力... - - + + Error! エラー！ - + Not inside a module... モジュール内ではない... - + Goto File Offset in %1 %1のファイル オフセットに移動 - - - - + + + + Hex 16進数 - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) Half float (16-bit) - - + + Value 値 - - + + Comments コメント - + Edit data at %1 %1 のデータを編集 - + Fill data at %1 %1のデータを埋め込み - + Save to file ファイルへ保存 - + All files (*.*) すべてのファイル(*.*) - + Find Pattern... パターンを検索... - + Selection not in a file... 選択範囲がファイル内にありません... - + Dump ダンプ - + Enter expression to sync with... 同期させる式を入力... - + Size サイズ - + Warning 警告 - + You're trying to allocate a zero-sized buffer just now. サイズがゼロのバッファを割り当てようとしています。 - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. バッファに割り当てようとしようとしているサイズが1GBを超えています。式が間違っていないかどうか確認してください。 - + Memory allocation failed! メモリの割り当てに失敗しました！ - - - No types loaded yet, parse a header first... - まだ読み込まれたタイプがありません。先にヘッダーを解析してください... - - - - Type to display - 表示する種類 - - - - Address to display %1 at - %1を表示するアドレス - CPUInfoBox @@ -3091,133 +3070,133 @@ CPURegistersView - + Modify value 値を変更 - + Increment value 値を増やす - + Decrement value 値を減らす - + Zero value ゼロ値 - + Toggle 切り替え - + Undo 取り消し - + Follow in Disassembler 逆アセンブラで追跡 - + Follow in Dump ダンプ画面で追跡 - + Follow in Stack スタック画面で追跡 - + Follow in Memory Map メモリマップ画面で追跡 - + &Remove hardware breakpoint ハードウェアブレークポイントを削除 (&R) - + Increment x87 Stack x87スタックをインクリメント - + Decrement x87 Stack x87スタックをデクリメント - + Highlight ハイライト - + Error エラー - - + + Edit %1 %1の編集 - - - - - + + + + + Edit 編集 - - + + Edit %1 register %1レジスタの編集 - + Edit FPU register FPUレジスタを編集 - + ERROR CONVERTING TO HEX 16進数への変換エラーが発生しました - + Set Last Error 最後のエラーを設定 - + Set Last Status 最後のステータスを設定 - + Follow in &Dump ダンプ画面で追跡 (&D) - + Copy old value: %1 古い値をコピー：%1 - + Set Hardware Breakpoint on %1 %1にハードウェア ブレークポイントを設定 @@ -3884,261 +3863,292 @@ CommonActions - + Follow in Disassembler 逆アセンブラで追跡 - + Show this address in disassembler. Equivalent command "d address". このアドレスを逆アセンブラに表示。 同等のコマンド"d address"。 - + &Follow DWORD in Disassembler 逆アセンブラでDWORDを追跡 (&F) - + &Follow QWORD in Disassembler 逆アセンブラでQWORDを追跡 (&F) - + Follow in Dump ダンプ画面で追跡 - + Show the address in dump. Equivalent command "dump address". このアドレスをダンプに表示。 同等のコマンド"dump address"。 - + &Follow DWORD in Current Dump 現在のダンプ画面でDWORDを追跡 (&F) - + &Follow QWORD in Current Dump 現在のダンプ画面でQWORDを追跡 (&F) - + Dump %1 ダンプ %1 - + Follow DWORD in Dump ダンプ画面でDWORDを追跡 - + Follow QWORD in Dump ダンプ画面でQWORDを追跡 - + Follow in Stack スタック画面で追跡 - + Show this address in stack view. Equivalent command "sdump address". このアドレスをスタックに表示。 同等のコマンド"sdump address"。 - + Follow in Memory Map メモリマップ画面で追跡 - + Show this address in memory map view. Equivalent command "memmapdump address". このアドレスをメモリマップに表示。 同等のコマンド"memmapdump address"。 - + Graph グラフ - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". この機能の制御フローグラフをCPUに表示。 同等のコマンド"graph address"。 - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle 切り替え - - + + Edit 編集 - - + + Set Hardware on Execution 実行時にハードウェアをセット - + Remove Hardware ハードウェアを削除 - - - - + + + + Replace Slot %1 (Unknown) スロット%1 (不明) の置き換え - + Breakpoint ブレークポイント - + Set Conditional Breakpoint 条件付きブレークポイントの設定 - + Replace Slot %1 (0x%2) スロット %1 (0x%2) の置き換え - + Label Current Address 現在のアドレスにラベルを付ける - + Comment コメント - + Toggle Bookmark ブックマークの設定/解除 - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". ここにブックマークを設定、または削除。 同等のコマンド "bookmarkset address"/"bookmarkdel address"。 - + Set %1 Here ここに %1 を設定 - + Set the next executed instruction to this address. Equivalent command "mov cip, address". このアドレスに次に実行される命令を設定。 同等のコマンド "mov cip, address"。 - + Create New Thread Here ここに 新しいスレッドを作成 - + Create a new thread at this address. Equivalent command "createthread address, argument". このアドレスに新しいスレッドを作成。 同等のコマンド "createthread address, argument"。 - + &Watch DWORD DWORD をウォッチへ追加(&W) - + &Watch QWORD QWORD をウォッチへ追加(&W) - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". ウォッチにアドレスを追加。 同等のコマンド "AddWatch [address], "uint""。 - + Cannot follow %1. Address is invalid. %1 を追跡できません。アドレスが無効です。 - + Add label at ラベルを追加 - + The label may be in use そのラベルは使用されています - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? ラベル "%1" は存在しているか有効な式です。このラベルを使うと望まない結果になる場合がありますが、続行しますか？ - - - + + + Error! エラー! - + DbgSetLabelAt failed! DbgSetLabelAt失敗！ - + Add comment at コメントを追加 - + DbgSetCommentAt failed! DbgSetCommentAt 失敗! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt 失敗! - + Address %1 is not executable アドレス %1 は実行可能ではありません - + Setting software breakpoint here may result in crash. Do you really want to continue? ここにソフトウェア ブレークポイントを設定するとクラッシュする可能性があります。続行しますか? - + + Error + エラー + + + + No types loaded yet, parse a header first... + まだ読み込まれたタイプがありません。先にヘッダーを解析してください... + + + + Type to display at %1 + + + + + Address to display %1 at + %1 を表示するアドレス + + + Setting new origin here may result in crash. Do you really want to continue? ここに新しい開始点を設定するとクラッシュする可能性があります。続行しますか? - + Creating new thread here may result in crash. Do you really want to continue? ここに新しいスレッドを作るとクラッシュする可能性があります。継続しますか? - + Argument for the new thread 新しいスレッドの引数 @@ -4838,12 +4848,13 @@ - + + Actions 操作 @@ -5503,97 +5514,102 @@ + Display type + 表示タイプ + + + Freeze the stack スタックをロック - + Go to Base of Stack Frame スタック フレームのベースへ移動 - + Go to Previous Stack Frame 前のスタック フレームへ - + Go to Next Stack Frame 次のスタック フレームへ - + Go to Previous Reference 前の参照に移動 - + Go to Next Reference 次の参照に移動 - + Modify value 値を変更 - + Watch DWORD/QWORD DWORD/QWORD をウォッチへ追加 - + Copy File Offset ファイル オフセットをコピー - + Start/Stop trace recording トレース記録の開始/停止 - + Copy -> Cropped Table コピー -> クロップされたテーブル - + Copy -> Table コピー -> テーブル - + Copy -> Line, To Log コピー -> 行をログへ - + Copy -> Cropped Table, To Log コピー -> クロップされたテーブルをログへ - + Copy -> Table, To Log コピー -> テーブルをログへ - + Copy -> Export Table コピー -> テーブルのエクスポート - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! 設定に見つかりませんでした! @@ -6024,7 +6040,7 @@ - + Done! 完了! @@ -8342,29 +8358,29 @@ SizeofType 失敗 - + VisitType failed VisitType 失敗 - + RemoveType failed RemoveType 失敗 - + Type %s removed 種類 %s を削除しました - + LoadTypes failed LoadTypes 失敗 - + Types loaded 読み込まれた種類 @@ -9775,170 +9791,170 @@ Do you want to continue debugging? StaticFileUnload 失敗 - + [PLUGIN] %s already loaded [PLUGIN] %s 既に読み込まれています - + [PLUGIN] Cannot find plugin: %s [PLUGIN] プラグインが見つかりません : %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] プラグインの読み込みに失敗しました : %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] エクスポート "pluginit" が見つかりません (プラグイン : %s ) - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] pluginit に失敗しました(プラグイン : %s ) - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s はこの SDK バージョンと互換性がありません - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d 読み込みました! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] GuiMenuAdd(%d) が失敗 (プラグイン : %s ) - + [PLUGIN] %s unloaded [PLUGIN] %s アンロードされました - + [PLUGIN] %s not found [PLUGIN] %s 見つかりません - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' [PLUGIN] 最上位のプラグインを無視してディレクトリ 'plugins\%s' を使用します - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] 無効なプラグイン ハンドル %d... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] コマンド "%s" の登録に失敗しました... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] コマンド "%s" が登録されました! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] コマンド "%s" の登録を解除しました! - + [PLUGIN, %s] Command "%s" failed to unregister... [PLUGIN, %s] コマンド "%s" の登録解除に失敗しました... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [PLUGIN, %s] 式関数 "%s" の登録に失敗しました... - - + + [PLUGIN, %s] Expression function "%s" registered! [PLUGIN, %s] 式関数 "%s" が登録されました! - + [PLUGIN, %s] Expression function "%s" unregistered! [PLUGIN, %s] 式関数 "%s" が登録されていません! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] 式関数 "%s" の登録解除に失敗しました... - + [PLUGIN, %s] Format function "%s" failed to register... [PLUGIN, %s] 書式関数 "%s" の登録に失敗しました... - + [PLUGIN, %s] Format function "%s" registered! [PLUGIN, %s] 書式関数 "%s" が登録されました! - + [PLUGIN, %s] Format function "%s" unregistered! [PLUGIN, %s] 書式関数 "%s" の登録を解除しました! - + [PLUGIN, %s] Format function "%s" failed to unregister... [PLUGIN, %s] 書式関数 "%s" の登録解除に失敗しました... @@ -10180,56 +10196,56 @@ Do you want to continue debugging? - + Failed to add %s %s; 追加に失敗しました %s %s; - + Failed to add function %s %s() 関数の追加に失敗しました %s %s() - + Failed to add enum %s 列挙型の追加に失敗しました %s - + Failed to add typedef %s %s; Typedef の追加に失敗しました %s %s; - + Failed to add member %s %s.%s; メンバの追加に失敗しました %s %s.%s; - + Failed to add enum member %s 列挙型メンバの追加に失敗しました %s - + Failed to add return type %s.%s; 戻り値の型を追加できませんでした %s.%s； - + Failed to add argument %s %s.%s; 引数の追加に失敗しました %s %s.%s; @@ -14531,7 +14547,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16219,90 +16235,90 @@ TEBは、Win32APIを呼び出すことなく、プロセスに関する多くの 値 - + &Follow address in Dump ダンプ内のアドレスを追跡(&F) - + Follow value in Dump ダンプ内の値を追跡 - + Follow value in Disassembler 逆アセンブラの値を追跡 - - + + Change address アドレスの変更 - + Display type 表示タイプ - - + + Load JSON JSON の読み込み - - + + Parse header ヘッダの解析 - + Remove 削除 - + Clear 消去 - + &Refresh 更新(&R) - + &Copy コピー(&C) - + Error エラー - + No types loaded yet, parse a header first... まだ読み込まれたタイプがありません。先にヘッダーを解析してください... - + Type to display 表示する種類 - + Address to display %1 at %1 を表示するアドレス - + JSON files (*.json);;All files (*.*) JSON ファイル (*.json);;すべてのファイル (*.*) - + Header files (*.h *.hpp);;All files (*.*) ヘッダ ファイル (*.h *.hpp);;すべてのファイル (*.*) diff --git a/x64dbg_ka_GE.ts b/x64dbg_ka_GE.ts index 9310c2b..a33ad81 100644 --- a/x64dbg_ka_GE.ts +++ b/x64dbg_ka_GE.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ &დისასამბლირებული - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error შეცდომა - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! შეცდომა! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex თექვსმეტობითი - - - + + + ASCII ASCII - - - + + + UNICODE უნიკოდი - + Float (32-bit) &Float (32-ბიტი) - + Double (64-bit) &Double (64-ბიტი) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments კომენტარები - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump დამპი - + Enter expression to sync with... - + Size ზომა - + Warning გაფრთხილება - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle გადართვა - + Undo - + Follow in Disassembler დისასემბლერში გადასვლა - + Follow in Dump - + Follow in Stack სტეკში გადასვლა - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error შეცდომა - - + + Edit %1 - - - - - + + + + + Edit შეცვლა - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler დისასემბლერში გადასვლა - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack სტეკში გადასვლა - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph გრაფი - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle გადართვა - - + + Edit შეცვლა - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment კომენტარი - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at იარლიყის დამატება - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! შეცდომა! - + DbgSetLabelAt failed! - + Add comment at კომენტარის დამატება - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + შეცდომა + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions @@ -5495,97 +5506,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6002,7 +6018,7 @@ - + Done! @@ -8177,28 +8193,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9510,147 +9526,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9872,49 +9888,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14176,7 +14192,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15854,90 +15870,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy &კოპირება - + Error შეცდომა - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ko_KR.ts b/x64dbg_ko_KR.ts index 0563c1b..79e82ce 100644 --- a/x64dbg_ko_KR.ts +++ b/x64dbg_ko_KR.ts @@ -2591,67 +2591,67 @@ - + Signed byte (8-bit) Signed 바이트 (8비트) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2696,250 +2696,229 @@ 디스어셈블리(&D) - - Display type - - - - - + + System Code 시스템 코드 - + System Data 시스템 데이터 - - + + User Code 사용자 코드 - + User Data 사용자 데이터 - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (문자열) - + (Unknown String) (알 수 없는 문자열) - - - + + + Modify value 값 수정 - - - - - + + + + Error 오류 - - + + The input text is not a number! 입력된 값이 숫자가 아닙니다! - + Enter expression to follow in Dump... 덤프에서 따라갈 표현식 입력... - - + + Error! 오류발생! - + Not inside a module... 모듈 내부가 아닙니다... - + Goto File Offset in %1 %1 에서 파일 오프셋으로 이동 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value 값 - - + + Comments 주석 - + Edit data at %1 %1 에 데이터 편집 - + Fill data at %1 %1 에 데이터 채우기 - + Save to file 파일로 저장 - + All files (*.*) 모든 파일 (*.*) - + Find Pattern... 패턴 찾기... - + Selection not in a file... 선택 항목이 파일에 없습니다... - + Dump 덤프 - + Enter expression to sync with... 동기화할 표현식을 입력... - + Size 크기 - + Warning 경고 - + You're trying to allocate a zero-sized buffer just now. 지금 크기가 0인 버퍼를 할당 시도했습니다. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. 할당하려는 버퍼의 크기가 1GB를 초과합니다. 표현식이 잘못되지 않도록 점검해주세요. - + Memory allocation failed! 메모리 할당 실패! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value 값 수정 - + Increment value 값 증가 - + Decrement value 값 감소 - + Zero value 값 0 - + Toggle 설정/해제 - + Undo 실행 취소 - + Follow in Disassembler 디스어셈블러에서 따라가기 - + Follow in Dump 덤프에서 따라가기 - + Follow in Stack 스택에서 따라가기 - + Follow in Memory Map 메모리 맵에서 따라가기 - + &Remove hardware breakpoint 하드웨어 중단점 제거(&R) - + Increment x87 Stack x87 스택 증가 - + Decrement x87 Stack x87 스택 감소 - + Highlight 하이라이트 - + Error 오류 - - + + Edit %1 %1 수정 - - - - - + + + + + Edit 편집 - - + + Edit %1 register 레지스터 %1 수정 - + Edit FPU register FPU 레지스터 수정 - + ERROR CONVERTING TO HEX HEX로 변환하는데 오류발생 - + Set Last Error 마지막 오류 설정 - + Set Last Status 최종 상태 설정 - + Follow in &Dump 덤프에서 따라가기(&D) - + Copy old value: %1 이전 값 복사: %1 - + Set Hardware Breakpoint on %1 %1에 하드웨어 중단점 설정 @@ -3882,260 +3861,291 @@ CommonActions - + Follow in Disassembler 디스어셈블러에서 따라가기 - + Show this address in disassembler. Equivalent command "d address". 디스어셈블러에 이 주소를 표시합니다. 동일한 명령어는 "d address"입니다. - + &Follow DWORD in Disassembler 디스어셈블러에서 DWORD 따라가기(&F) - + &Follow QWORD in Disassembler 디스어셈블러에서 QWORD 따라가기(&F) - + Follow in Dump 덤프에서 따라가기 - + Show the address in dump. Equivalent command "dump address". 덤프에 이 주소를 표시합니다. 동일한 명령어는 "dump address"입니다. - + &Follow DWORD in Current Dump 현재 덤프에서 DWORD 따라가기(&F) - + &Follow QWORD in Current Dump 현재 덤프에서 QWORD 따라가기(&F) - + Dump %1 덤프 %1 - + Follow DWORD in Dump 덤프에서 DWORD 따라가기 - + Follow QWORD in Dump 덤프에서 QWORD 따라가기 - + Follow in Stack 스택에서 따라가기 - + Show this address in stack view. Equivalent command "sdump address". 스택 뷰에 이 주소를 표시합니다. 동일한 명령어는 "sdump address"입니다. - + Follow in Memory Map 메모리 맵에서 따라가기 - + Show this address in memory map view. Equivalent command "memmapdump address". 메모리 맵 뷰에 이 주소를 표시합니다. 동일한 명령어는 "memmapdump address"입니다. - + Graph 그래프 - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". CPU 뷰에 이 함수의 제어 흐름 그래프를 표시합니다. 동일한 명령어는 "graph address"입니다. - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle 설정/해제 - - + + Edit 편집 - - + + Set Hardware on Execution 실행 시 하드웨어 설정 - + Remove Hardware 하드웨어 제거 - - - - + + + + Replace Slot %1 (Unknown) 슬롯 교체 %1 (알 수 없음) - + Breakpoint 중단점 - + Set Conditional Breakpoint 조건부 중단점 설정 - + Replace Slot %1 (0x%2) 슬롯 교체 %1 (0x%2) - + Label Current Address 현재 주소 레이블 - + Comment 주석 - + Toggle Bookmark 책갈피 설정/해제 - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". 북마크를 설정하거나 삭제합니다. 동일한 명령어는 "bookmarkset address"/"bookmarkdel address"입니다. - + Set %1 Here 여기에 %1 설정 - + Set the next executed instruction to this address. Equivalent command "mov cip, address". 다음 실행될 명령어를 이 주소로 설정합니다. 동일한 명령어는 "mov cip, address"입니다. - + Create New Thread Here 여기에 새 스레드를 만들기 - + Create a new thread at this address. Equivalent command "createthread address, argument". 이 주소에 대한 새로운 스레드를 생성합니다. 동일한 명령어는 "createthread address, argument"입니다. - + &Watch DWORD DWORD 주시(&W) - + &Watch QWORD QWORD 보기(&W) - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". 주시 뷰에 주소를 추가합니다. 동일한 명령어는 "AddWatch [address], "uint""입니다. - + Cannot follow %1. Address is invalid. %1를 따라갈 수 없습니다. 주소가 유효하지 않습니다. - + Add label at 다음에 레이블 추가: - + The label may be in use 해당 레이블이 사용 중인 것 같습니다 - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? 해당 레이블 "%1"가 존재하는 레이블이거나 유효한 표현식입니다. 이러한 레이블을 사용하면 바람직하지 않은 영향을 낳을 수 있습니다. 그래도 계속하시겠습니까? - - - + + + Error! 오류발생! - + DbgSetLabelAt failed! DbgSetLabelAt 실패! - + Add comment at 다음에 주석 추가: - + DbgSetCommentAt failed! DbgSetCommentAt 실패! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt 실패! - + Address %1 is not executable 주소 %1는 실행할 수 없습니다. - + Setting software breakpoint here may result in crash. Do you really want to continue? 여기에 소프트웨어 중단점을 설정하면 충돌을 일으킬 수 있습니다. 계속하시겠습니까? - + + Error + 오류 + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? 여기에 새로운 시작점을 설정하면 충돌을 일으킬 수 있습니다. 계속하시겠습니까? - + Creating new thread here may result in crash. Do you really want to continue? 여기에 새로운 스레드를 생성하면 충돌을 일으킬 수 있습니다. 계속하시겠습니까? - + Argument for the new thread 새 스레드에 대한 인자 @@ -4836,12 +4846,13 @@ - + + Actions 액션 @@ -5501,97 +5512,102 @@ + Display type + + + + Freeze the stack 스택 동결 - + Go to Base of Stack Frame 스택 프레임 기준으로 이동 - + Go to Previous Stack Frame 이전 스택 프레임으로 이동 - + Go to Next Stack Frame 다음 스택 프레임으로 이동 - + Go to Previous Reference 이전 참조로 이동 - + Go to Next Reference 다음 참조로 이동 - + Modify value 값 수정 - + Watch DWORD/QWORD DWORD/QWORD 보기 - + Copy File Offset File Offset 복사하기 - + Start/Stop trace recording 추적 기록 시작/중지 - + Copy -> Cropped Table 복사 -> 부분 테이블 - + Copy -> Table 복사 -> 전체 테이블 - + Copy -> Line, To Log 복사 -> 줄을 로그로 - + Copy -> Cropped Table, To Log 복사 -> 부분 테이블을 로그로 - + Copy -> Table, To Log 복사 -> 전체 테이블을 로그로 - + Copy -> Export Table 복사 -> 테이블 내보내기 - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! 설정에서 찾을 수 없습니다! @@ -6017,7 +6033,7 @@ - + Done! 완료! @@ -8319,29 +8335,29 @@ SizeofType 실패 - + VisitType failed VisitType 실패 - + RemoveType failed RemoveType 실패 - + Type %s removed %s 형식 제거됨 - + LoadTypes failed LoadTypes 실패 - + Types loaded 형식 불러옴 @@ -9717,156 +9733,156 @@ Do you want to continue debugging? StaticFileUnload 실패 - + [PLUGIN] %s already loaded [PLUGIN] %s 이미 불러와 짐 - + [PLUGIN] Cannot find plugin: %s [PLUGIN] 플러그인: %s 을 찾을 수 없습니다 - + [PLUGIN] Failed to load plugin: %s [PLUGIN] 플러그인: %s 을 로드할 수 없습니다 - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] 플러그인에서 "pluginit" 를 찾을수 없습니다: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] 플러그인에 대한 pluginit 실패: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s가 이 SDK 버전과 호환되지 않습니다. - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d 불러와 짐! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] 플러그인에 대한 GuiMenuAdd(%d) 실패: %s - + [PLUGIN] %s unloaded [PLUGIN] %s 언로드 - + [PLUGIN] %s not found [PLUGIN] %s 을 찾을 수 없습니다 - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' [PLUGIN] 최상위 플러그인을 무시하고 'plugins\%s' 디렉터리를 우선합니다. - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] 유효하지 않은 플러그인 핸들 %d... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] 명령어 "%s" 레지스터 실패... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] 명령어 "%s" 레지스터됨! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] 명령어 "%s" 레지스터 해제됨! - + [PLUGIN, %s] Command "%s" failed to unregister... [PLUGIN, %s] 명령어 "%s" 레지스터 해제 실패... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [PLUGIN, %s] 표현식 함수 "%s" 레지스터 실패... - - + + [PLUGIN, %s] Expression function "%s" registered! [PLUGIN, %s] 표현식 함수 "%s" 레지스터됨! - + [PLUGIN, %s] Expression function "%s" unregistered! [PLUGIN, %s] 표현식 함수 "%s" 레지스터 해제됨! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] 표현식 함수 "%s" 레지스터 해제 실패... - + [PLUGIN, %s] Format function "%s" failed to register... [PLUGIN, %s] 포맷 함수 "%s" 레지스터 실패... - + [PLUGIN, %s] Format function "%s" registered! [PLUGIN, %s] 포맷 함수 "%s" 레지스터됨! - + [PLUGIN, %s] Format function "%s" unregistered! [PLUGIN, %s] 포맷 함수 "%s" 레지스터 해제됨! - + [PLUGIN, %s] Format function "%s" failed to unregister... [PLUGIN, %s] 포맷 함수 "%s" 레지스터 해제 실패... @@ -10095,53 +10111,53 @@ Do you want to continue debugging? - + Failed to add %s %s; %s %s 을 추가 하지 못했습니다; - + Failed to add function %s %s() 함수 %s %s() 를 추가하지 못했습니다 - + Failed to add enum %s - + Failed to add typedef %s %s; Typedef %s %s 을 추가 하지 못했습니다; - + Failed to add member %s %s.%s; Member %s %s.%s 을 추가하지 못했습니다; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; 인자 %s %s.%s 을 추가하지 못했습니다; @@ -14454,7 +14470,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16150,90 +16166,90 @@ The TEB can be used to get a lot of information on the process without calling W 값 - + &Follow address in Dump 덤프내의 값을 따라가기(&F) - + Follow value in Dump 덤프내의 값을 따라가기 - + Follow value in Disassembler 디스어셈블러 값을 따라가기 - - + + Change address 주소 변경 - + Display type - - + + Load JSON JSON 불러오기 - - + + Parse header 헤더 구문분석 - + Remove 제거 - + Clear 지우기 - + &Refresh 새로고침(&R) - + &Copy &복사 - + Error 오류 - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON 파일 (*.json);;모든 파일 (*.*) - + Header files (*.h *.hpp);;All files (*.*) 헤더 파일 (*.h *.hpp);;모든 파일 (*.*) diff --git a/x64dbg_lt_LT.ts b/x64dbg_lt_LT.ts index ee51a32..ca5143a 100644 --- a/x64dbg_lt_LT.ts +++ b/x64dbg_lt_LT.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_nl_NL.ts b/x64dbg_nl_NL.ts index c61d9e6..e554a70 100644 --- a/x64dbg_nl_NL.ts +++ b/x64dbg_nl_NL.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Signed byte (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2695,250 +2695,229 @@ &Disassembly - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Onbekende String) - - - + + + Modify value Waarde wijzigen - - - - - + + + + Error Fout - - + + The input text is not a number! - + Enter expression to follow in Dump... Voer de expressie om in Dump te volgen in... - - + + Error! Fout! - + Not inside a module... Opgegeven adres is niet binnen een bekende module... - + Goto File Offset in %1 Ga naar Bestand Afstand in %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Waarde - - + + Comments Opmerkingen - + Edit data at %1 Bewerk de gegevens op %1 - + Fill data at %1 Vul de gegevens op %1 - + Save to file Opslaan in bestand - + All files (*.*) Alle bestanden(*.*) - + Find Pattern... Vind Patroon... - + Selection not in a file... Selectie niet in een bestand... - + Dump Dump - + Enter expression to sync with... Voer de expressie om mee te synchroniseren in... - + Size Omvang - + Warning Waarschuwing - + You're trying to allocate a zero-sized buffer just now. U probeert een buffer van lengte nul te alloceren. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Het buffer dat u probeert te alloceren is groter is dan 1GB. Controleer uw expressie om ervoor te zorgen dat er niets mis is. - + Memory allocation failed! Geheugen allocatie mislukt! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value Waarde wijzigen - + Increment value - + Decrement value - + Zero value - + Toggle Wissel - + Undo Herstel - + Follow in Disassembler Volg in Disassembler - + Follow in Dump Volg in Dump - + Follow in Stack Volg in Stack - + Follow in Memory Map Volg in Geheugen Map - + &Remove hardware breakpoint - + Increment x87 Stack Verhoog x87 Stack - + Decrement x87 Stack Verlaag x87 Stack - + Highlight Markeer - + Error Fout - - + + Edit %1 - - - - - + + + + + Edit Bewerken - - + + Edit %1 register - + Edit FPU register Bewerk FPU register - + ERROR CONVERTING TO HEX FOUT CONVERTEREN NAAR HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Volg in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 Zet Hardware Breekpunt op %1 @@ -3882,260 +3861,291 @@ CommonActions - + Follow in Disassembler Volg in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler Volg DWORD in Disassembler - + &Follow QWORD in Disassembler Volg DWORD in Disassembler - + Follow in Dump Volg in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack Volg in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Volg in Geheugen Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Grafiek - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Wissel - - + + Edit Bewerken - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address Label Huidig Adres - + Comment Commentaar - + Toggle Bookmark Wissel Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Creëer Nieuw Thread Hier - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at Label toevoegen aan - + The label may be in use Het label is mogelijk al in gebruik - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Label "%1" bestaat al al of is een geldige expressie. Het gebruik van een dergelijk label kan ongewenste effecten hebben. Wilt u toch doorgaan? - - - + + + Error! Fout! - + DbgSetLabelAt failed! DbgSetLabelAt mislukt! - + Add comment at Reactie toevoegen aan - + DbgSetCommentAt failed! DbgSetCommentAt mislukt! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt mislukt! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + Fout + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4835,12 +4845,13 @@ - + + Actions @@ -5500,97 +5511,102 @@ + Display type + + + + Freeze the stack Vergrendel de Stack - + Go to Base of Stack Frame Ga naar Begin van Stack Frame - + Go to Previous Stack Frame Ga naar Vorige Stack Frame - + Go to Next Stack Frame Ga naar Volgende Stack Frame - + Go to Previous Reference - + Go to Next Reference - + Modify value Waarde wijzigen - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NIET GEVONDEN IN DE CONFIGURATIE! @@ -6016,7 +6032,7 @@ - + Done! Gereed! @@ -8314,29 +8330,29 @@ SizeofType is mislukt - + VisitType failed VisitType is mislukt - + RemoveType failed RemoveType is mislukt - + Type %s removed Type %s verwijderd - + LoadTypes failed LoadTypes is mislukt - + Types loaded Types geladen @@ -9699,156 +9715,156 @@ Do you want to continue debugging? StaticFileUnload is mislukt - + [PLUGIN] %s already loaded [PLUGIN] %s is al geladen - + [PLUGIN] Cannot find plugin: %s [PLUGIN] Kan plugin niet vinden: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Het laden van de plugin is mislukt: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] Export "pluginit" niet gevonden in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] pluginit is mislukt voor plugin: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s is niet compatibel met deze SDK versie - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d is geladen! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded [PLUGIN] %s uitgeladen - + [PLUGIN] %s not found [PLUGIN] %s niet gevonden - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -10072,49 +10088,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14404,7 +14420,7 @@ Wilt u deze patches toch toepassen? RegistersView - + AVX-512 isn't supported on this computer. @@ -16084,90 +16100,90 @@ Het TEB kan gebruikt worden om veel informatie over het proces te achterhalen zo Waarde - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address Wijzig adres - + Display type - - + + Load JSON Laad JSON - - + + Parse header Verwerk header - + Remove Verwijder - + Clear Leeg maken - + &Refresh Ve&rnieuwen - + &Copy Kopieëren - + Error Fout - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON bestanden (*.json);; Alle bestanden (*. *) - + Header files (*.h *.hpp);;All files (*.*) Headerbestanden (*.h *.hpp);;Alle bestanden (*. *) diff --git a/x64dbg_no_NO.ts b/x64dbg_no_NO.ts index 214aab8..62914bb 100644 --- a/x64dbg_no_NO.ts +++ b/x64dbg_no_NO.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) Signert short (16-biters) - + Signed long (32-bit) Signert long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex kort (16-biters) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2694,250 +2694,229 @@ &Disassembly - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value Endre verdien - - - - - + + + + Error Feil - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! Feil! - + Not inside a module... Ikke inne i en modul... - + Goto File Offset in %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments Kommentarer - + Edit data at %1 Redigere data på %1 - + Fill data at %1 Fyll ut data på %1 - + Save to file Lagre til fil - + All files (*.*) Alle filer (*.*) - + Find Pattern... Finn mønsteret... - + Selection not in a file... - + Dump Dumpe - + Enter expression to sync with... - + Size Størrelse - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value Endre verdien - + Increment value - + Decrement value - + Zero value - + Toggle Aktiver/Deaktiver - + Undo - + Follow in Disassembler Følge i Disassembler - + Follow in Dump Følg i Dump - + Follow in Stack Følg i stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack Increment x87 Stack - + Decrement x87 Stack Decrement x87 Stack - + Highlight - + Error Feil - - + + Edit %1 - - - - - + + + + + Edit Rediger - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Følg i & dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,261 +3856,292 @@ CommonActions - + Follow in Disassembler Følge i Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Følge DWORD i Disassembler - + &Follow QWORD in Disassembler &Følge QWORD i Disassembler - + Follow in Dump Følg i Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Følge DWORD i gjeldende Dump - + &Follow QWORD in Current Dump &Følge QWORD i gjeldende Dump - + Dump %1 Dump %1 - + Follow DWORD in Dump Følg DWORD i Dump - + Follow QWORD in Dump Følg QWORD i Dump - + Follow in Stack Følg i stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Aktiver/Deaktiver - - + + Edit Rediger - - + + Set Hardware on Execution Angi maskinvare på gjennomføring - + Remove Hardware Fjerne maskinvare - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Stoppunkt - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) Erstatte Slot %1 (0x%2) - + Label Current Address Gjeldende adresse for etikett - + Comment Kommentar - + Toggle Bookmark Veksle bokmerke - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Opprett ny tråd her - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Kan ikke følge %1. Adressen er ugyldig. - + Add label at Legge til en etikett på - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! Feil! - + DbgSetLabelAt failed! DbgSetLabelAt mislyktes! - + Add comment at Legg til kommentar på - + DbgSetCommentAt failed! DbgSetCommentAt mislyktes! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt mislyktes! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + Feil + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4831,12 +4841,13 @@ - + + Actions @@ -5496,97 +5507,102 @@ + Display type + + + + Freeze the stack Fryse stakken - + Go to Base of Stack Frame - + Go to Previous Stack Frame - + Go to Next Stack Frame - + Go to Previous Reference - + Go to Next Reference - + Modify value Endre verdien - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6003,7 +6019,7 @@ - + Done! @@ -8178,28 +8194,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9511,147 +9527,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9873,49 +9889,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14178,7 +14194,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15856,90 +15872,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh &Oppdatere - + &Copy & Kopi - + Error Feil - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_pl_PL.ts b/x64dbg_pl_PL.ts index 29bb36f..4f94eaa 100644 --- a/x64dbg_pl_PL.ts +++ b/x64dbg_pl_PL.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Bajt ze znakiem (8-bit) - + Signed short (16-bit) Słowo ze znakiem (16-bitowe) - + Signed long (32-bit) Long ze znakiem (32-bit) - + Signed long long (64-bit) Long long ze znakiem (64-bit) - + Unsigned byte (8-bit) Bajt bez znaku (8-bit) - + Unsigned short (16-bit) Short bez znaku (16-bit) - + Unsigned long (32-bit) Long bez znaku (32-bit) - + Unsigned long long (64-bit) Long long bez znaku (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2695,250 +2695,229 @@ - - Display type - - - - - + + System Code Kod systemowy - + System Data Dane systemu - - + + User Code Kod użytkownika - + User Data Dane użytkownika - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Nieznany String) - - - + + + Modify value Modyfikuj wartość - - - - - + + + + Error Błąd - - + + The input text is not a number! - + Enter expression to follow in Dump... Wprowadź wyrażenie do śledzenia w zrzucie... - - + + Error! Błąd! - + Not inside a module... Nie wewnątrz modułu... - + Goto File Offset in %1 W pliku idź do przesunięcia %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Wartość - - + + Comments Komentarze - + Edit data at %1 Edytuj dane przy %1 - + Fill data at %1 Wypełnij dane przy %1 - + Save to file Zapisz do pliku - + All files (*.*) Wszystkie pliki (*.*) - + Find Pattern... Znajdź wzór... - + Selection not in a file... - + Dump Zrzut - + Enter expression to sync with... Wprowadź wyrażenie do synchronizacji... - + Size Rozmiar - + Warning Ostrzeżenie - + You're trying to allocate a zero-sized buffer just now. Próbujesz teraz zaalokować bufor o wielkości zero. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Rozmiar buforu który starasz się przydzielić przekracza 1 Gb. Sprawdź wyrażenie aby upewnić się, że jest ono poprawne. - + Memory allocation failed! Alokacja pamięci nie powiodła się! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3086,133 +3065,133 @@ CPURegistersView - + Modify value Modyfikuj wartość - + Increment value - + Decrement value - + Zero value - + Toggle Przełącz - + Undo - + Follow in Disassembler Śledź w disasemblerze - + Follow in Dump Śledź w zrzucie - + Follow in Stack Śledź na stosie - + Follow in Memory Map Śledź w mapie pamięci - + &Remove hardware breakpoint - + Increment x87 Stack Zwiększ stos x87 - + Decrement x87 Stack Zmniejsz stos x87 - + Highlight - + Error Błąd - - + + Edit %1 - - - - - + + + + + Edit Edytuj - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Śledź w &zrzucie - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3879,260 +3858,291 @@ CommonActions - + Follow in Disassembler Śledź w disasemblerze - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler Śledź &DWORD w disasemblerze - + &Follow QWORD in Disassembler Śledź &QWORD w disasemblerze - + Follow in Dump Śledź w zrzucie - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Śledź DWORD w bieżącym zrzucie - + &Follow QWORD in Current Dump &Śledź QWORD w bieżącym zrzucie - + Dump %1 Zrzut %1 - + Follow DWORD in Dump Śledź DWORD w zrzucie - + Follow QWORD in Dump Śledź QWORD w zrzucie - + Follow in Stack Śledź na stosie - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Śledź w mapie pamięci - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Diagram - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Przełącz - - + + Edit Edytuj - - + + Set Hardware on Execution Ustaw sprzętowy na wykonaniu - + Remove Hardware Usuń sprzętowe - - - - + + + + Replace Slot %1 (Unknown) Zamień Slot %1 (Nieznany) - + Breakpoint Punkt przerwania - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) Zamień Slot %1 (0x%2) - + Label Current Address Oznakuj bieżący adres - + Comment Komentarz - + Toggle Bookmark Przełącz zakładkę - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Stwórz nowy wątek tutaj - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD Śl&edź DWORD - + &Watch QWORD Śl&edź QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at Dodaj etykietę na - + The label may be in use Etykieta może być w użyciu - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! Błąd! - + DbgSetLabelAt failed! DbgSetLabelAt zakończony niepowodzeniem! - + Add comment at Dodaj komentarz przy - + DbgSetCommentAt failed! DbgSetCommentAt zakończony niepowodzeniem! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt zakończony niepowodzeniem! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Ustawienie software breakpointu może zakończyć się crashem. Czy na pewno chcesz kontynuować? - + + Error + Błąd + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Ustawienie przerwania programowego może zakończyć się awarią. Czy na pewno chcesz kontynuować? - + Creating new thread here may result in crash. Do you really want to continue? Stworzenie nowego wątku tutaj może zakończyć się awarią. Czy na pewno chcesz kontynuować? - + Argument for the new thread @@ -4832,12 +4842,13 @@ - + + Actions Akcje @@ -5497,97 +5508,102 @@ + Display type + + + + Freeze the stack Zablokuj stos - + Go to Base of Stack Frame Idź do bazy ramki stosu - + Go to Previous Stack Frame Idź do poprzedniej ramki stosu - + Go to Next Stack Frame Idź do następnej ramki stosu - + Go to Previous Reference Idź do poprzedniego odniesienia - + Go to Next Reference Idź do następnego odniesienia - + Modify value Modyfikuj wartość - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NIE ZNALEZIONO W KONFIGURACJI! @@ -6011,7 +6027,7 @@ - + Done! Gotowe! @@ -8259,29 +8275,29 @@ SizeofType nie powiodło się - + VisitType failed VisitType nie powiodło się - + RemoveType failed RemoveType nie powiodło się - + Type %s removed Typ %s usunięty - + LoadTypes failed LoadTypes nie powiodło się - + Types loaded Typy załadowane @@ -9616,156 +9632,156 @@ Do you want to continue debugging? StaticFileUnload nie powiodło się - + [PLUGIN] %s already loaded [PLUGIN] %s już załadowany - + [PLUGIN] Cannot find plugin: %s [PLUGIN] Nie można znaleźć wtyczki: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Nie udało się wczytać wtyczki: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] Nie znaleziono eksportu "pluginit" we wtyczce: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] pluginit nie powiodło się dla wtyczki: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s jest niezgodny z tą wersją SDK - + [PLUGIN] %s v%d Loaded! [WTYCZKA] %s v%d Załadowany! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded [WTYCZKA] %s wyładowany - + [PLUGIN] %s not found [PLUGIN] %s nie znaleziono - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9989,49 +10005,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14310,7 +14326,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15988,90 +16004,90 @@ The TEB can be used to get a lot of information on the process without calling W Wartość - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address Zmień adres - + Display type - - + + Load JSON Ładuj JSON - - + + Parse header Analizuj nagłówek - + Remove Usuń - + Clear Wyczyść - + &Refresh &Odśwież - + &Copy &Kopiuj - + Error Błąd - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) Pliki JSON (*.json);;Wszystkie pliki (*.*) - + Header files (*.h *.hpp);;All files (*.*) Pliki nagłówkowe (*.h *.hpp);;Wszystkie pliki (*.*) diff --git a/x64dbg_pt_BR.ts b/x64dbg_pt_BR.ts index d50cbfd..2b02e7e 100644 --- a/x64dbg_pt_BR.ts +++ b/x64dbg_pt_BR.ts @@ -2592,67 +2592,67 @@ - + Signed byte (8-bit) Byte Assinalado (8-Bit) - + Signed short (16-bit) Curto Assinalado (16 Bits) - + Signed long (32-bit) Longo Assinalado (32-Bit) - + Signed long long (64-bit) Longo Múltiplo Assinalado (64 Bits) - + Unsigned byte (8-bit) Unsigned byte (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hext short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2697,250 +2697,229 @@ &Desmontagem - - Display type - - - - - + + System Code Código de Sistema - + System Data Dados do sistema - - + + User Code Código do usuário - + User Data Dados do usuário - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (String desconhecida) - - - + + + Modify value Modificar valor - - - - - + + + + Error Error - - + + The input text is not a number! O texto de entrada não é um número! - + Enter expression to follow in Dump... Digita a expressão para seguir na Pilha... - - + + Error! Erro! - + Not inside a module... Não está dentro de um módulo... - + Goto File Offset in %1 Ir Para Offset do Arquivo em %1 - - - - + + + + Hex Hexadecimal - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32 bits) - + Double (64-bit) Double (64 bits) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Valor - - + + Comments Comentários - + Edit data at %1 Editar dados em %1 - + Fill data at %1 Preencher dados em %1 - + Save to file Salvar arquivo - + All files (*.*) Todos os arquivos (*. *) - + Find Pattern... Encontrar padrão... - + Selection not in a file... Seleção não está em um arquivo... - + Dump Despejo - + Enter expression to sync with... Digite a expressão para sincronizar com... - + Size Tamanho - + Warning Aviso - + You're trying to allocate a zero-sized buffer just now. Você está tentando alocar um buffer de tamanho zero agora. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. O tamanho do buffer que está tentando alocar excede 1GB. Por favor, verifique sua expressão para garantir que nada está errado. - + Memory allocation failed! Alocação de memória falhou! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3091,133 +3070,133 @@ CPURegistersView - + Modify value Modificar valor - + Increment value Valor de incremento - + Decrement value Valor de decremento - + Zero value Valor zero - + Toggle Seletor - + Undo Desfazer - + Follow in Disassembler Seguir no Disassembler - + Follow in Dump Seguir no Despejo - + Follow in Stack Seguir na Pilha - + Follow in Memory Map Seguir no Mapa da Memória - + &Remove hardware breakpoint &Remover ponto de interrupção de hardware - + Increment x87 Stack Incrementar Pilha x87 - + Decrement x87 Stack Decrementar Pilha x87 - + Highlight Destacar - + Error Erro - - + + Edit %1 - - - - - + + + + + Edit Editar - - + + Edit %1 register - + Edit FPU register Editar registro FPU - + ERROR CONVERTING TO HEX ERRO CONVERTANDO PARA HEX - + Set Last Error Definir último erro - + Set Last Status Definir último estado - + Follow in &Dump Seguir no Despejo - + Copy old value: %1 Copiar valor antigo: %1 - + Set Hardware Breakpoint on %1 Definir ponto de interrupção de hardware em %1 @@ -3884,261 +3863,292 @@ CommonActions - + Follow in Disassembler Seguir no Disassembler - + Show this address in disassembler. Equivalent command "d address". Mostrar este endereço no desmontagem. Comando equivalente "d address". - + &Follow DWORD in Disassembler &Seguir DWORD no Disassembler - + &Follow QWORD in Disassembler &Seguir DWORD no Disassembler - + Follow in Dump Seguir no Despejo - + Show the address in dump. Equivalent command "dump address". Mostrar este endereço no desmontagem. Comando equivalente "d address". - + &Follow DWORD in Current Dump &Seguir DWORD no Despejo Atual - + &Follow QWORD in Current Dump &Seguir DWORD no Despejo Atual - + Dump %1 Despejo de %1 - + Follow DWORD in Dump Seguir DWORD no Despejo - + Follow QWORD in Dump Seguir QWORD no Despejo - + Follow in Stack Seguir na Pilha - + Show this address in stack view. Equivalent command "sdump address". Mostrar este endereço no desmontagem. Comando equivalente "d address". - + Follow in Memory Map Seguir no Mapa da Memória - + Show this address in memory map view. Equivalent command "memmapdump address". Mostrar este endereço no desmontagem. Comando equivalente "d address". - + Graph Gráfico - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". Mostra o gráfico de fluxo de controle desta função na visualização da CPU. Comando equivalente "endereço gráfico". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Seletor - - + + Edit Editar - - + + Set Hardware on Execution Conjunto de Hardware na Execução - + Remove Hardware Remover Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Ponto de quebra - + Set Conditional Breakpoint Definir ponto de interrupção Condicional - + Replace Slot %1 (0x%2) - + Label Current Address Etiqueta de endereço atual - + Comment Comentário - + Toggle Bookmark Alternar Marcador - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Criar um novo segmento aqui - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD Observar DWORD - + &Watch QWORD Observar QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Não é possível seguir %1. O endereço é inválido. - + Add label at Adicionar etiqueta no - + The label may be in use O rótulo pode estar em uso - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? O rótulo "%1" pode ser um rótulo existente ou uma expressão válida. O uso desse rótulo pode ter efeitos indesejáveis. Você tem certeza que deseja continuar? - - - + + + Error! Erro! - + DbgSetLabelAt failed! DbgSetLabelAt falhou! - + Add comment at Adicionar comentário no - + DbgSetCommentAt failed! DbgSetCommentAt falhou! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt falhou! - + Address %1 is not executable O endereço %1 não é executável - + Setting software breakpoint here may result in crash. Do you really want to continue? Definir o ponto de interrupção do programa aqui pode resultar em falha. Você tem certeza que deseja continuar? - + + Error + Erro + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Definir nova origem aqui pode resultar em falha. Você tem certeza que deseja continuar? - + Creating new thread here may result in crash. Do you really want to continue? Criar novo segmento aqui pode resultar em falha. Você tem certeza que deseja continuar? - + Argument for the new thread Argumento para o novo segmento @@ -4838,12 +4848,13 @@ - + + Actions Ações @@ -5503,97 +5514,102 @@ + Display type + + + + Freeze the stack Congelar a pilha - + Go to Base of Stack Frame Ir Para a Base da Estrutura da Pilha - + Go to Previous Stack Frame Ir Para a Estrutura da Pilha Anteiror - + Go to Next Stack Frame Ir Para a Próxima Estrutura da Pilha - + Go to Previous Reference Ir para Referência Anterior - + Go to Next Reference Ir para a Próxima Referência - + Modify value Modificar valor - + Watch DWORD/QWORD Observar DWORD/QWORD - + Copy File Offset Copiar Deslocamento de Arquivo - + Start/Stop trace recording Iniciar/Parar gravação do rastreamento - + Copy -> Cropped Table Copiar -> Tabela recortada - + Copy -> Table Copiar -> Tabela - + Copy -> Line, To Log Copiar -> Linha, Para Registro - + Copy -> Cropped Table, To Log Copiar -> Tabela recortada, para registro - + Copy -> Table, To Log Copiar -> Tabela, Para Registro - + Copy -> Export Table Copiar -> Tabela de exportação - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! NÃO ENCONTRADO EM CONFIG! @@ -6018,7 +6034,7 @@ - + Done! Feito! @@ -8260,28 +8276,28 @@ SizeofType falhou - + VisitType failed VisitType falhou - + RemoveType failed RemoveType falhou - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9621,148 +9637,148 @@ Do you want to continue debugging? StaticFileUnload falhou - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found [PLUGIN] %s não encontrado - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9988,51 +10004,51 @@ Do you want to continue debugging? - + Failed to add %s %s; Falha ao adicionar %s %s; - + Failed to add function %s %s() Falha ao adicionar a função %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; Falha ao adicionar membro %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; Falha ao adicionar argumento %s %s.%s; @@ -14298,7 +14314,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15976,90 +15992,90 @@ The TEB can be used to get a lot of information on the process without calling W Valor - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address Alterar endereço - + Display type - - + + Load JSON Carregar JSON - - + + Parse header - + Remove Remover - + Clear Limpar - + &Refresh - + &Copy &Copiar - + Error Erro - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_pt_PT.ts b/x64dbg_pt_PT.ts index a79013a..baa5396 100644 --- a/x64dbg_pt_PT.ts +++ b/x64dbg_pt_PT.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) byte com sinal (8-bit) - + Signed short (16-bit) short com sinal (16-bit) - + Signed long (32-bit) long com sinal (32-bit) - + Signed long long (64-bit) long long com sinal (64-bit) - + Unsigned byte (8-bit) byte sem sinal (8-bit) - + Unsigned short (16-bit) short sem sinal (16-bit) - + Unsigned long (32-bit) long sem sinal (32-bit) - + Unsigned long long (64-bit) long long sem sinal (64-bit) - + Hex short (16-bit) short em hexadecimal (16-bit) - + Hex long (32-bit) long em hexadecimal (32-bit) - + Hex long long (64-bit) long long em hexadecimal (64-bit) @@ -2694,250 +2694,229 @@ &Disassembly - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value Modificar valor - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... Insira a expressão a seguir no dump... - - + + Error! Erro! - + Not inside a module... Não está dentro de um módulo... - + Goto File Offset in %1 Ir para o offset do ficheiro em %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments Comentários - + Edit data at %1 Editar dados em %1 - + Fill data at %1 Preencher dados em %1 - + Save to file Guardar no ficheiro - + All files (*.*) Todos os ficheiros (*.*) - + Find Pattern... Encontrar padrão... - + Selection not in a file... - + Dump Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value Modificar valor - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump Seguir o dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump Seguir no &dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Seguir a DWORD no Disassembler - + &Follow QWORD in Disassembler &Seguir a QWORD no Disassembler - + Follow in Dump Seguir o dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Comentário - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Criar um novo thread aqui - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at Adicionar etiqueta em - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! Erro! - + DbgSetLabelAt failed! DbgSetLabelAt falhou! - + Add comment at Adicionar comentário em - + DbgSetCommentAt failed! DbgSetCommentAt falhou! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt falhou! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions @@ -5495,97 +5506,102 @@ - Freeze the stack + Display type + Freeze the stack + + + + Go to Base of Stack Frame Ir para a base do stack frame - + Go to Previous Stack Frame Ir para o frame anterior no stack - + Go to Next Stack Frame Ir para o próximo frame no stack - + Go to Previous Reference - + Go to Next Reference - + Modify value Modificar valor - + Watch DWORD/QWORD - + Copy File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6002,7 +6018,7 @@ - + Done! @@ -8177,28 +8193,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9510,147 +9526,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9872,49 +9888,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14176,7 +14192,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15854,90 +15870,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy &Copiar - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ro_RO.ts b/x64dbg_ro_RO.ts index 35705c8..4461811 100644 --- a/x64dbg_ro_RO.ts +++ b/x64dbg_ro_RO.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions @@ -5495,97 +5506,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6002,7 +6018,7 @@ - + Done! @@ -8177,28 +8193,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9510,147 +9526,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9872,49 +9888,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14176,7 +14192,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15854,90 +15870,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_ru_RU.ts b/x64dbg_ru_RU.ts index 706e6fb..0565609 100644 --- a/x64dbg_ru_RU.ts +++ b/x64dbg_ru_RU.ts @@ -2591,67 +2591,67 @@ - + Signed byte (8-bit) Знаковый байт (8 бит) - + Signed short (16-bit) Signed short (16 бит) - + Signed long (32-bit) Signed long (32 бита) - + Signed long long (64-bit) Signed long long (64 бита) - + Unsigned byte (8-bit) Беззнаковый байт (8 бит) - + Unsigned short (16-bit) Unsigned short (16 бит) - + Unsigned long (32-bit) Unsigned long (32 бита) - + Unsigned long long (64-bit) Unsigned long long (64 бита) - + Hex short (16-bit) Hex short (16 бит) - + Hex long (32-bit) Hex long (32 бита) - + Hex long long (64-bit) Hex long long (64 бита) @@ -2696,250 +2696,229 @@ &Дизассемблированный код - - Display type - - - - - + + System Code Системный код - + System Data Системные данные - - + + User Code Пользовательский код - + User Data Пользовательские данные - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (Строка) - + (Unknown String) (Неизвестная строка) - - - + + + Modify value Изменение значения - - - - - + + + + Error Ошибка - - + + The input text is not a number! Введенный текст не является числом! - + Enter expression to follow in Dump... Введите выражение для перехода в дамп... - - + + Error! Ошибка! - + Not inside a module... Находится вне модуля... - + Goto File Offset in %1 Переход к смещению в файле %1 - - - - + + + + Hex Шестнадцатеричное - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32 бита) - + Double (64-bit) Double (64 бита) - + Long double (80-bit) Long double (80 бит) - + Half float (16-bit) - - + + Value Значение - - + + Comments Комментарии - + Edit data at %1 Редактирование данных по адресу %1 - + Fill data at %1 Заполнение данных по адресу %1 - + Save to file Сохранить в файл - + All files (*.*) Все файлы (*.*) - + Find Pattern... Поиск шаблона... - + Selection not in a file... Выделение вне файла... - + Dump Дамп - + Enter expression to sync with... Введите выражение для связи с... - + Size Размер - + Warning Внимание - + You're trying to allocate a zero-sized buffer just now. Вы пытаетесь выделить буфер нулевого размера. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Размер буфера, который вы пытаетесь выделить превышает 1 Гб. Пожалуйста, проверьте ваше выражение, чтобы убедиться, что все правильно. - + Memory allocation failed! Ошибка выделения памяти! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3092,133 +3071,133 @@ CPURegistersView - + Modify value Изменение значения - + Increment value Увеличить значение - + Decrement value Уменьшить значение - + Zero value Нулевое значение - + Toggle Переключить - + Undo Отменить - + Follow in Disassembler Перейти к дизассемблированному коду - + Follow in Dump Перейти к дампу - + Follow in Stack Перейти к стеку - + Follow in Memory Map Перейти к карте памяти - + &Remove hardware breakpoint &Удалить аппаратную точку останова - + Increment x87 Stack Увеличить стек x87 - + Decrement x87 Stack Уменьшить стек x87 - + Highlight Подсветить - + Error Ошибка - - + + Edit %1 - - - - - + + + + + Edit Редактирование - - + + Edit %1 register - + Edit FPU register Редактировать регистр FPU - + ERROR CONVERTING TO HEX ОШИБКА ПРЕОБРАЗОВАНИЯ В HEX - + Set Last Error Установить последнюю ошибку - + Set Last Status Установить последний статус - + Follow in &Dump Перейти к &дампу - + Copy old value: %1 Скопировать старое значение: %1 - + Set Hardware Breakpoint on %1 Установить аппаратную точку останову на %1 @@ -3885,261 +3864,292 @@ CommonActions - + Follow in Disassembler Перейти к дизассемблированному коду - + Show this address in disassembler. Equivalent command "d address". Показать этот адрес в дизассемблере. Эквивалентная команда "d адрес". - + &Follow DWORD in Disassembler &Перейти по DWORD в дизассемблированный код - + &Follow QWORD in Disassembler &Перейти по QWORD в дизассемблированный код - + Follow in Dump Перейти к дампу - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Перейти по DWORD в текущий дамп - + &Follow QWORD in Current Dump &Перейти по QWORD в текущий дамп - + Dump %1 Дамп %1 - + Follow DWORD in Dump Перейти по DWORD в дамп - + Follow QWORD in Dump Перейти по QWORD в дамп - + Follow in Stack Перейти к стеку - + Show this address in stack view. Equivalent command "sdump address". Показать этот адрес в окне просмотра стека. Эквивалентная команда "sdump адрес". - + Follow in Memory Map Перейти к карте памяти - + Show this address in memory map view. Equivalent command "memmapdump address". Показать этот адрес в окне просмотра оперативной памяти. Эквивалентная команда "memmapdump адрес". - + Graph График - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Переключить - - + + Edit Редактирование - - + + Set Hardware on Execution Установить аппаратную точку останова на исключение - + Remove Hardware Удалить аппаратную точку останова - - - - + + + + Replace Slot %1 (Unknown) Заменить слот %1 (неизвестно) - + Breakpoint Точка останова - + Set Conditional Breakpoint Установить условную точку останова - + Replace Slot %1 (0x%2) Заменить слот %1 (0x%2) - + Label Current Address Добавить метку к текущему адресу - + Comment Комментарий - + Toggle Bookmark Поставить/Убрать закладку - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". Установить или удалить закладку здесь. Эквивалентная команда "bookmarkset адрес"/"bookmarkdel адрес". - + Set %1 Here Установить %1 здесь - + Set the next executed instruction to this address. Equivalent command "mov cip, address". Установить адрес следующей исполняемой инструкции на данный. Эквивалентная команда "mov cip, адрес". - + Create New Thread Here Создать новый поток здесь - + Create a new thread at this address. Equivalent command "createthread address, argument". Создать новый поток по данному адресу. Эквивалентная команда "createthread адрес, аргумент". - + &Watch DWORD &Просмотр DWORD - + &Watch QWORD &Просмотр QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". Добавить адрес в список отслеживания. Эквивалентная команда "AddWatch [адрес], "uint"". - + Cannot follow %1. Address is invalid. Не удалось перейти по адресу %1. Недопустимый адрес. - + Add label at Добавление метки к - + The label may be in use Возможно метка уже используется - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Метка "%1" может быть существующей меткой или допустимым выражением. Использование такой метки может привести к нежелательным последствиям. Хотите продолжить? - - - + + + Error! Ошибка! - + DbgSetLabelAt failed! Сбой DbgSetLabelAt! - + Add comment at Добавление комментария к - + DbgSetCommentAt failed! Сбой DbgSetCommentAt! - + DbgSetBookmarkAt failed! Сбой DbgSetBookmarkAt! - + Address %1 is not executable Адрес %1 не исполняемый. - + Setting software breakpoint here may result in crash. Do you really want to continue? Установка программной точки останова может привести к аварийному завершению программы. Вы действительно хотите продолжить? - + + Error + Ошибка + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Установка нового начала может привести к аварийному завершению программы. Вы действительно хотите продолжить? - + Creating new thread here may result in crash. Do you really want to continue? Создание нового потока может привести к аварийному завершению программы. Вы действительно хотите продолжить? - + Argument for the new thread Аргумент для нового потока @@ -4839,12 +4849,13 @@ - + + Actions Действия @@ -5504,97 +5515,102 @@ + Display type + + + + Freeze the stack Заморозить стек - + Go to Base of Stack Frame Перейти к базе кадра стека - + Go to Previous Stack Frame Перейти к предыдущему кадру стека - + Go to Next Stack Frame Перейти к следующему кадру стека - + Go to Previous Reference Перейти к предыдущей ссылке - + Go to Next Reference Перейти к следующей ссылке - + Modify value Изменение значения - + Watch DWORD/QWORD Просмотр DWORD/QWORD - + Copy File Offset Копировать смещение файла - + Start/Stop trace recording - + Copy -> Cropped Table Копировать -> Обрезанная таблица - + Copy -> Table Копировать -> Таблица - + Copy -> Line, To Log Копировать -> Строка в лог-файл - + Copy -> Cropped Table, To Log Копировать -> Обрезанная таблица в лог-файл - + Copy -> Table, To Log Копировать -> Таблица в лог-файл - + Copy -> Export Table Копировать -> Экспортировать таблицу - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! НЕ НАЙДЕНО В КОНФИГУРАЦИИ! @@ -6020,7 +6036,7 @@ - + Done! Готово! @@ -8325,29 +8341,29 @@ Не удалось выполнить SizeofType - + VisitType failed Не удалось выполнить VisitType - + RemoveType failed Не удалось выполнить RemoveType - + Type %s removed Тип %s удален - + LoadTypes failed Не удалось выполнить LoadTypes - + Types loaded Типы загружены @@ -9744,169 +9760,169 @@ Do you want to continue debugging? Сбой StaticFileUnload - + [PLUGIN] %s already loaded [PLUGIN] %s уже загружен - + [PLUGIN] Cannot find plugin: %s [PLUGIN] Невозможно найти плагин: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Не удалось загрузить плагин: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] Не найдена экспортируемая функция "pluginit" в плагине: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] ошибка pluginit для плагина: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s несовместим с данной версией SDK - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d загружен! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] Ошибка GuiMenuAdd(%d) для плагина: %s - + [PLUGIN] %s unloaded [PLUGIN] %s выгружен - + [PLUGIN] %s not found [PLUGIN] %s не найден - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] Неверный обработчик плагина %d... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] Ошибка регистрации команды "%s"... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] Команда "%s" зарегистрирована! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] Команда "%s" не зарегистрирована! - + [PLUGIN, %s] Command "%s" failed to unregister... [PLUGIN, %s] Ошибка при отмене регистрации команды "%s"... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [PLUGIN, %s] Ошибка регистрации функции выражения "%s"... - - + + [PLUGIN, %s] Expression function "%s" registered! [PLUGIN, %s] Функция выражения "%s" зарегистрирована! - + [PLUGIN, %s] Expression function "%s" unregistered! [PLUGIN, %s] Функция выражения "%s" не зарегистрирована! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] Ошибка при отмене регистрации функции выражения "%s"... - + [PLUGIN, %s] Format function "%s" failed to register... [PLUGIN, %s] Ошибка регистрации функции форматирования "%s"... - + [PLUGIN, %s] Format function "%s" registered! [PLUGIN, %s] Функция форматирования "%s" зарегистрирована! - + [PLUGIN, %s] Format function "%s" unregistered! [PLUGIN, %s] Функция форматирования "%s" не зарегистрирована! - + [PLUGIN, %s] Format function "%s" failed to unregister... [PLUGIN, %s] Ошибка при отмене регистрации функции форматирования "%s"... @@ -10145,53 +10161,53 @@ Do you want to continue debugging? - + Failed to add %s %s; Не удалось добавить %s %s; - + Failed to add function %s %s() Не удалось добавить функцию %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; Не удалось добавить typedef %s %s; - + Failed to add member %s %s.%s; Не удалось добавить член %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; Не удалось добавить аргумент %s %s.%s; @@ -14491,7 +14507,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16199,90 +16215,90 @@ TEB может использоваться для получения инфор Значение - + &Follow address in Dump - + Follow value in Dump Перейти к значению в дампе - + Follow value in Disassembler Перейти к значению в дизассемблере - - + + Change address Изменить адрес - + Display type - - + + Load JSON Загрузить JSON - - + + Parse header Анализировать заголовок - + Remove Удалить - + Clear Очистить - + &Refresh &Обновить - + &Copy &Копировать - + Error Ошибка - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON-файлы (*.json);;Все файлы (*.*) - + Header files (*.h *.hpp);;All files (*.*) Заголовочные файлы (*.h *.hpp);;Все файлы (*.*) diff --git a/x64dbg_si_LK.ts b/x64dbg_si_LK.ts index 9923130..de1c1c8 100644 --- a/x64dbg_si_LK.ts +++ b/x64dbg_si_LK.ts @@ -2593,67 +2593,67 @@ - + Signed byte (8-bit) අත්සන් බයිට් (8-ටිකක්) - + Signed short (16-bit) කෙටි අත්සන් (16-bit) - + Signed long (32-bit) අත්සන් කරන ලද දිගු (32-bit) - + Signed long long (64-bit) දිගු දිගු (64-ටිකක්) අත්සන් - + Unsigned byte (8-bit) අත්සන් නොකළ බයිට් (8-ටිකක්) - + Unsigned short (16-bit) අත්සන් නොකළ කෙටි (16-bit) - + Unsigned long (32-bit) අත්සන් නොකළ දිගු (32-bit) - + Unsigned long long (64-bit) අත්සන් නොකළ දිගු (64-bit) - + Hex short (16-bit) Hex කෙටි (16-bit) - + Hex long (32-bit) හෙක්ස් දිගු (32-ටිකක්) - + Hex long long (64-bit) හෙක්ස් දිගු (64-ටිකක්) @@ -2698,250 +2698,229 @@ &විසුරුවා හැරීම - - Display type - සංදර්ශක වර්ගය - - - - + + System Code පද්ධතිය කේතය - + System Data දත්ත පද්ධතිය - - + + User Code පරිශීලක කේතය - + User Data පරිශීලක දත්ත - + (Real4) (රියල්4) - + (Real8) (රියල්8) - + (BYTE) (බයිට්) - + (WORD) (වචනය) - + (DWORD) (ඩබ්ලිව්වර්ඩ්) - - + + (QWORD) (ප්‍රශ්නාර්ථය) - + (String) (සංගීත) - + (Unknown String) (නොදන්නා සංගීත) - - - + + + Modify value අගය වෙනස් කරන්න - - - - - + + + + Error දෝෂය - - + + The input text is not a number! ආදාන පෙළ අංකයක් නොවේ! - + Enter expression to follow in Dump... ඩම්ප් අනුගමනය කිරීමට ප්රකාශනය ඇතුල් කරන්න... - - + + Error! දෝෂය! - + Not inside a module... මොඩියුලයක් ඇතුළත නොවේ... - + Goto File Offset in %1 %1දී ඕෆ්සෙට් ගොනුව - - - - + + + + Hex හෙක්ස් - - - + + + ASCII ඇසි - - - + + + UNICODE යුනිකෝඩ් - + Float (32-bit) පාවෙන (32-ටිකක්) - + Double (64-bit) ද්විත්ව (64-ටිකක්) - + Long double (80-bit) දිගු ද්විත්ව (80-ටිකක්) - + Half float (16-bit) අර්ධ පාවෙන (බිට් 16) - - + + Value වටිනාකම - - + + Comments අදහස් - + Edit data at %1 %1හි දත්ත සංස්කරණය කරන්න - + Fill data at %1 %1හි දත්ත පුරවන්න - + Save to file ගොනු කිරීමට සුරකින්න - + All files (*.*) සියලුම ගොනු (*.*) - + Find Pattern... රටාව සොයන්න... - + Selection not in a file... ගොනුවක නොතේරීම... - + Dump ඩම්ප් - + Enter expression to sync with... සමඟ සමමුහුර්ත වීමට ප්රකාශනය ඇතුළත් කරන්න... - + Size ප්රමාණය - + Warning අවවාදය - + You're trying to allocate a zero-sized buffer just now. ඔබ දැන් ශුන්ය ප්රමාණයේ බෆරයක් වෙන් කිරීමට උත්සාහ කරනවා. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. ඔබ වෙන් කිරීමට උත්සාහ කරන බෆරයේ ප්රමාණය 1GB ඉක්මවයි. කිසිවක් වැරදියි කියා සහතික කිරීම සඳහා කරුණාකර ඔබේ ප්රකාශනය පරීක්ෂා කරන්න. - + Memory allocation failed! මතක වෙන් කිරීම අසාර්ථක විය! - - - No types loaded yet, parse a header first... - තවම වර්ග පූරණය කර නැත, පළමුව ශීර්ෂයක් විග්‍රහ කරන්න... - - - - Type to display - පෙන්වීමට ටයිප් කරන්න - - - - Address to display %1 at - %1 පෙන්වීමට ලිපිනය - CPUInfoBox @@ -3092,133 +3071,133 @@ CPURegistersView - + Modify value අගය වෙනස් කරන්න - + Increment value අගය වැඩි කරන්න - + Decrement value අඩු කිරීමේ අගය - + Zero value ශුන්‍ය අගය - + Toggle ටොගල් කරන්න - + Undo අහෝසි - + Follow in Disassembler Disassembler තුළ අනුගමනය - + Follow in Dump ඩම්ප් තුළ අනුගමනය - + Follow in Stack Stack දී අනුගමනය - + Follow in Memory Map මතක සිතියම අනුගමනය කරන්න - + &Remove hardware breakpoint සහ දෘඩාංග බිඳවැටීම් ඉවත් කරන්න - + Increment x87 Stack වර්ධකය x87 Stack - + Decrement x87 Stack නියෝග x87 Stack - + Highlight ඉස්මතු කරන්න - + Error දෝෂය - - + + Edit %1 %1සංස්කරණය කරන්න - - - - - + + + + + Edit සංස්කරණය කරන්න - - + + Edit %1 register %1 ලේඛනය සංස්කරණය කරන්න - + Edit FPU register FPU ලේඛනය සංස්කරණය කරන්න - + ERROR CONVERTING TO HEX හෙක්ස් බවට පරිවර්තනය කිරීමේ දෝෂය - + Set Last Error අවසන් දෝෂය සකසන්න - + Set Last Status පසුගිය තත්ත්වය සකසන්න - + Follow in &Dump අනුගමනය & ඩම්ප් - + Copy old value: %1 පැරණි අගය පිටපත් කරන්න: %1 - + Set Hardware Breakpoint on %1 %1මත දෘඩාංග බ්රේක්පොයින්ට් සකසන්න @@ -3885,261 +3864,292 @@ CommonActions - + Follow in Disassembler Disassembler තුළ අනුගමනය - + Show this address in disassembler. Equivalent command "d address". මෙම ලිපිනය disassembler හි පෙන්වන්න. සමාන විධානය "d address". - + &Follow DWORD in Disassembler & DWORD DWORD අනුගමනය කරන්න - + &Follow QWORD in Disassembler & විසුරුවා හැරීමේදී QWORD අනුගමනය කරන්න - + Follow in Dump ඩම්ප් තුළ අනුගමනය - + Show the address in dump. Equivalent command "dump address". ලිපිනය ඩම්ප් එකේ පෙන්වන්න. සමාන විධානය "ඩම්ප් ලිපිනය". - + &Follow DWORD in Current Dump & වත්මන් ඩම්ප් තුළ DWORD අනුගමනය කරන්න - + &Follow QWORD in Current Dump & දැනට පවතින ඩම්ප් වල QWORD අනුගමනය කරන්න - + Dump %1 %1ඩම්ප් - + Follow DWORD in Dump ඩම්ප් හි ඩීවර්ඩ් අනුගමනය කරන්න - + Follow QWORD in Dump ඩම්ප් හි QWORD අනුගමනය කරන්න - + Follow in Stack Stack දී අනුගමනය - + Show this address in stack view. Equivalent command "sdump address". මෙම ලිපිනය ස්ටැක් දර්ශනයෙන් පෙන්වන්න. සමාන විධානය "sdump address". - + Follow in Memory Map මතක සිතියම අනුගමනය කරන්න - + Show this address in memory map view. Equivalent command "memmapdump address". මෙම ලිපිනය මතක සිතියම් දර්ශනයේ පෙන්වන්න. සමාන විධානය "memmapdump address". - + Graph ප්රස්ථාර - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". මෙම ශ්‍රිතයේ පාලන ප්‍රවාහ ප්‍රස්තාරය CPU දර්ශනයෙන් පෙන්වන්න. සමාන විධානය "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle ටොගල් කරන්න - - + + Edit සංස්කරණය කරන්න - - + + Set Hardware on Execution ක්රියාත්මක මත දෘඩාංග සකසන්න - + Remove Hardware දෘඩාංග ඉවත් කරන්න - - - - + + + + Replace Slot %1 (Unknown) ස්ලොට් %1 ප්රතිස්ථාපනය කරන්න (නොදන්නා) - + Breakpoint බ්රේක්පොයින්ට් - + Set Conditional Breakpoint කොන්දේසි සහිත බ්රේක්පොයින්ට් සකසන්න - + Replace Slot %1 (0x%2) ස්ලොට් %1 (0x%2) ප්රතිස්ථාපනය කරන්න - + Label Current Address වත්මන් ලිපිනය ලේබල් - + Comment අදහස් දක්වන්න - + Toggle Bookmark ටොගල් කරන්න බුක්මාක් - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". මෙහි පිටු සලකුණක් සකසන්න, නැතහොත් පිටු සලකුණ ඉවත් කරන්න. "bookmarkset address"/"bookmarkdel address" යන සමාන විධානය. - + Set %1 Here මෙතන %1 සකසන්න - + Set the next executed instruction to this address. Equivalent command "mov cip, address". ඊළඟට ක්‍රියාත්මක කරන ලද උපදෙස් මෙම ලිපිනයට සකසන්න. සමාන විධානය "mov cip, address". - + Create New Thread Here මෙහි නව නූල් සාදන්න - + Create a new thread at this address. Equivalent command "createthread address, argument". මෙම ලිපිනයේ නව නූලක් සාදන්න. "createthread address, argument" යන සමාන විධානය. - + &Watch DWORD & වොච් ඩීවර්ඩ් - + &Watch QWORD QWORD වොච් - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". ඔරලෝසු දර්ශනයේ ලිපිනය එක් කරන්න. සමාන විධානය "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. %1අනුගමනය කළ නොහැක. ලිපිනය අවලංගුයි. - + Add label at ලේබලය සහ එකතු කරන්න - + The label may be in use ලේබලය භාවිතයේ තිබිය හැකිය - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? “%1" ලේබලය දැනට පවතින ලේබලයක් හෝ වලංගු ප්රකාශනයක් විය හැකිය. එවැනි ලේබලය භාවිතා කිරීමෙන් අනවශ්ය බලපෑම් ඇති විය හැකිය. ඔබට තවමත් ඉදිරියට යාමට අවශ්යද? - - - + + + Error! දෝෂය! - + DbgSetLabelAt failed! DbgsetLabelat අසමත්! - + Add comment at දී අදහස් එකතු කරන්න - + DbgSetCommentAt failed! DbgsetCommentat අසාර්ථකයි! - + DbgSetBookmarkAt failed! DbgsetbookMarkat අසමත්! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? මෙහි මෘදුකාංග බිඳවැටීමක් සැකසීම කඩා වැටීමට හේතු විය හැක. ඔබට ඇත්තටම දිගටම කරගෙන යාමට අවශ්යද? - + + Error + දෝෂය + + + + No types loaded yet, parse a header first... + තවම වර්ග පූරණය කර නැත, පළමුව ශීර්ෂයක් විග්‍රහ කරන්න... + + + + Type to display at %1 + + + + + Address to display %1 at + %1 පෙන්වීමට ලිපිනය + + + Setting new origin here may result in crash. Do you really want to continue? මෙහි නව මූලාරම්භය සැකසීම බිඳ වැටීමට හේතු විය හැක. ඔබට ඇත්තටම දිගටම කරගෙන යාමට අවශ්යද? - + Creating new thread here may result in crash. Do you really want to continue? මෙහි නව නූල් නිර්මාණය කඩා වැටීමට හේතු විය හැක. ඔබට ඇත්තටම දිගටම කරගෙන යාමට අවශ්යද? - + Argument for the new thread නව නූල් සඳහා තර්කය @@ -4839,12 +4849,13 @@ - + + Actions ක්‍රියා @@ -5504,97 +5515,102 @@ + Display type + සංදර්ශක වර්ගය + + + Freeze the stack මෙම අඩුක්කුව කැටි කරන්න - + Go to Base of Stack Frame Stack රාමු මූලික යන්න - + Go to Previous Stack Frame පසුගිය Stack රාමු වෙත යන්න - + Go to Next Stack Frame ඊළඟ Stack රාමු වෙත යන්න - + Go to Previous Reference පසුගිය විමර්ශන වෙත යන්න - + Go to Next Reference ඊළඟ විමර්ශන වෙත යන්න - + Modify value අගය වෙනස් කරන්න - + Watch DWORD/QWORD වොච් ඩෝඩ්/QWORD - + Copy File Offset ගොනු ඕෆ්සෙට් පිටපත් - + Start/Stop trace recording හෝඩුවාවන් පටිගත කිරීම ආරම්භ කරන්න/නවත්වන්න - + Copy -> Cropped Table පිටපත් -> වගු - + Copy -> Table පිටපත් -> වගුව - + Copy -> Line, To Log පිටපත් කිරීම -> රේඛාව, ලොග් වීමට - + Copy -> Cropped Table, To Log පිටපත් -> වගු, ලොග් වීමට - + Copy -> Table, To Log පිටපත් -> වගුව, ලොග් වීමට - + Copy -> Export Table පිටපත් -> අපනයන වගුව - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! CONFIG හි සොයාගත නොහැක! @@ -6025,7 +6041,7 @@ - + Done! ඉවරයි! @@ -8339,29 +8355,29 @@ SizeofType අසමත් - + VisitType failed Visittype අසමත් - + RemoveType failed ඉවත් කිරීම අසමත් විය - + Type %s removed වර්ගය %s ඉවත් - + LoadTypes failed ලෝඩ්වර්ග අසමත් විය - + Types loaded පටවා වර්ග @@ -9769,170 +9785,170 @@ Do you want to continue debugging? ස්ථිතිගොනු කිරීම අසාර්ථකයි - + [PLUGIN] %s already loaded [PLUGIN] %s දැනටමත් පටවා ඇත - + [PLUGIN] Cannot find plugin: %s [PLUGIN] ප්ලගිනය සොයාගත නොහැක: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] ප්ලගිනය පූරණය කිරීමට අසමත් විය: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] ප්ලගිනය සොයාගත නොහැකි “ප්ලගිනය” අපනයන: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] ප්ලගිනය සඳහා අසමත් විය: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s මෙම SDK අනුවාදය සමඟ නොගැලපේ - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d ලෝඩඩ්! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] GuimenuAdd (%d) ප්ලගිනය සඳහා අසමත් විය: %s - + [PLUGIN] %s unloaded [PLUGIN] %s බෑම - + [PLUGIN] %s not found [PLUGIN] %s සොයා ගත්තේ නැත - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' [PLUGIN] 'plugins\%s' නාමාවලිය වෙනුවට ඉහළ මට්ටමේ plugin නොසලකා හරිමින් - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] වලංගු නොවන ප්ලගිනය හසුරුව %d... - + [PLUGIN, %s] Command "%s" failed to register... [ප්ලගිනය, %s] විධානය "%s" ලියාපදිංචි කිරීමට අසමත් විය... - + [PLUGIN, %s] Command "%s" registered! [ප්ලගිනය, %s] විධානය "%s" ලියාපදිංචි! - + [PLUGIN, %s] Command "%s" unregistered! [ප්ලගිනය, %s] විධානය "%s" ලියාපදිංචි නොකළ! - + [PLUGIN, %s] Command "%s" failed to unregister... [ප්ලගිනය, %s] විධානය "%s" අලියාපදිංචි කිරීමට අසමත් විය... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [ප්ලගිනය, %s] එක්ස්ප්රස් ශ්රිතය "%s" ලියාපදිංචි කිරීමට අසමත් විය... - - + + [PLUGIN, %s] Expression function "%s" registered! [ප්ලගිනය, %s] ප්රකාශනය කාර්යය "%s" ලියාපදිංචි! - + [PLUGIN, %s] Expression function "%s" unregistered! [ප්ලගිනය, %s] ප්රකාශ කිරීමේ කාර්යය "%s" ලියාපදිංචි නොකළ! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] එක්ස්ප්රස් ශ්රිතය "%s" ලියාපදිංචි කිරීමට අසමත් විය... - + [PLUGIN, %s] Format function "%s" failed to register... [ප්ලගිනය, %s] ආකෘතිය ශ්රිතය "%s" ලියාපදිංචි කිරීමට අසමත් විය... - + [PLUGIN, %s] Format function "%s" registered! [ප්ලගිනය, %s] ආකෘතිය ශ්රිතය "%s" ලියාපදිංචි! - + [PLUGIN, %s] Format function "%s" unregistered! [ප්ලගිනය, %s] ආකෘතිය ශ්රිතය "%s" ලියාපදිංචි නොකළ! - + [PLUGIN, %s] Format function "%s" failed to unregister... [ප්ලගිනය, %s] ආකෘතිය ශ්රිතය "%s" අලියාපදිංචි කිරීමට අසමත් විය... @@ -10173,53 +10189,53 @@ Do you want to continue debugging? - + Failed to add %s %s; %s %s; එකතු කිරීමට අසමත් විය - + Failed to add function %s %s() ශ්රිතය එකතු කිරීමට අසමත් විය %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; ටයිප් %s %sඑකතු කිරීමට අසමත් විය; - + Failed to add member %s %s.%s; සාමාජික %s %sඑකතු කිරීමට අසමත් විය.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; තර්කය එකතු කිරීමට අසමත් විය %s %s.%s; @@ -14522,7 +14538,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16215,90 +16231,90 @@ Win32 API ඇමතීමෙන් තොරව ක්රියාවලිය වටිනාකම - + &Follow address in Dump &ඩම්ප් හි ලිපිනය අනුගමනය කරන්න - + Follow value in Dump ඩම්ප් හි අගය අනුගමනය කරන්න - + Follow value in Disassembler විසුරුවා හැරීමේ යන්ත්‍රයේ අගය අනුගමනය කරන්න - - + + Change address ලිපිනය වෙනස් කරන්න - + Display type සංදර්ශක වර්ගය - - + + Load JSON පැටවුම් JSN - - + + Parse header ශීර්ෂ විග්රහ - + Remove ඉවත් කරන්න - + Clear පැහැදිලි - + &Refresh &නැවුම් කරන්න - + &Copy &පිටපත් - + Error දෝෂය - + No types loaded yet, parse a header first... තවම වර්ග පූරණය කර නැත, පළමුව ශීර්ෂයක් විග්‍රහ කරන්න... - + Type to display පෙන්වීමට ටයිප් කරන්න - + Address to display %1 at %1 පෙන්වීමට ලිපිනය - + JSON files (*.json);;All files (*.*) JSN ගොනු (*.json); සියලුම ගොනු (*.*) - + Header files (*.h *.hpp);;All files (*.*) ශීර්ෂ ගොනු (*.h *.hpp); සියලුම ගොනු (*.*) diff --git a/x64dbg_sr_SP.ts b/x64dbg_sr_SP.ts index 8e65a5e..e6249e3 100644 --- a/x64dbg_sr_SP.ts +++ b/x64dbg_sr_SP.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_sv_SE.ts b/x64dbg_sv_SE.ts index b05bb3d..270b990 100644 --- a/x64dbg_sv_SE.ts +++ b/x64dbg_sv_SE.ts @@ -2588,67 +2588,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2693,250 +2693,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3084,133 +3063,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3876,260 +3855,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4829,12 +4839,13 @@ - + + Actions @@ -5494,97 +5505,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6001,7 +6017,7 @@ - + Done! @@ -8176,28 +8192,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9509,147 +9525,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9871,49 +9887,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14175,7 +14191,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15853,90 +15869,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_th_TH.ts b/x64dbg_th_TH.ts index cc578bf..87dd5dc 100644 --- a/x64dbg_th_TH.ts +++ b/x64dbg_th_TH.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) - + Signed short (16-bit) - + Signed long (32-bit) - + Signed long long (64-bit) - + Unsigned byte (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2695,250 +2695,229 @@ - - Display type - - - - - + + System Code - + System Data - - + + User Code - + User Data - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value - - - - - + + + + Error - - + + The input text is not a number! - + Enter expression to follow in Dump... - - + + Error! - + Not inside a module... - + Goto File Offset in %1 - - - - + + + + Hex - - - + + + ASCII - - - + + + UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments - + Edit data at %1 - + Fill data at %1 - + Save to file - + All files (*.*) - + Find Pattern... - + Selection not in a file... - + Dump - + Enter expression to sync with... - + Size - + Warning - + You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3086,133 +3065,133 @@ CPURegistersView - + Modify value - + Increment value - + Decrement value - + Zero value - + Toggle - + Undo - + Follow in Disassembler - + Follow in Dump - + Follow in Stack - + Follow in Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error - - + + Edit %1 - - - - - + + + + + Edit - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3878,260 +3857,291 @@ CommonActions - + Follow in Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler - + &Follow QWORD in Disassembler - + Follow in Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump - + &Follow QWORD in Current Dump - + Dump %1 - + Follow DWORD in Dump - + Follow QWORD in Dump - + Follow in Stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle - - + + Edit - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint - + Set Conditional Breakpoint - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at - + The label may be in use - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? - - - + + + Error! - + DbgSetLabelAt failed! - + Add comment at - + DbgSetCommentAt failed! - + DbgSetBookmarkAt failed! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4831,12 +4841,13 @@ - + + Actions @@ -5496,97 +5507,102 @@ - Freeze the stack + Display type - Go to Base of Stack Frame + Freeze the stack - Go to Previous Stack Frame + Go to Base of Stack Frame - Go to Next Stack Frame + Go to Previous Stack Frame - Go to Previous Reference + Go to Next Stack Frame - Go to Next Reference + Go to Previous Reference - Modify value + Go to Next Reference - Watch DWORD/QWORD + Modify value - Copy File Offset + Watch DWORD/QWORD + Copy File Offset + + + + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! @@ -6003,7 +6019,7 @@ - + Done! @@ -8178,28 +8194,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9511,147 +9527,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9873,49 +9889,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14177,7 +14193,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15855,90 +15871,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove - + Clear - + &Refresh - + &Copy - + Error - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_tr_TR.ts b/x64dbg_tr_TR.ts index 5ecd6b2..94b1f0c 100644 --- a/x64dbg_tr_TR.ts +++ b/x64dbg_tr_TR.ts @@ -2590,67 +2590,67 @@ - + Signed byte (8-bit) Signed bayt (8-bit) - + Signed short (16-bit) Signed short (16-bit) - + Signed long (32-bit) Signed long (32-bit) - + Signed long long (64-bit) Signed long long (64-bit) - + Unsigned byte (8-bit) Unsigned bayt (8-bit) - + Unsigned short (16-bit) Unsigned short (16-bit) - + Unsigned long (32-bit) Unsigned long (32-bit) - + Unsigned long long (64-bit) Unsigned long long (64-bit) - + Hex short (16-bit) Hex short (16-bit) - + Hex long (32-bit) Hex long (32-bit) - + Hex long long (64-bit) Hex long long (64-bit) @@ -2695,250 +2695,229 @@ &Disassembly - - Display type - - - - - + + System Code Sistem Kodu - + System Data Sistem Verileri - - + + User Code Kullanıcı Kodu - + User Data Kullanıcı Verisi - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (String) - + (Unknown String) (Bilinmeyen String) - - - + + + Modify value Değeri değiştir - - - - - + + + + Error Hata - - + + The input text is not a number! - + Enter expression to follow in Dump... Döküm'de takip edilecek ifadeyi girin.. - - + + Error! Hata! - + Not inside a module... Modül içinde değil... - + Goto File Offset in %1 Dosya İçi Pozisyona Git -> %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32-bit) - + Double (64-bit) Double (64-bit) - + Long double (80-bit) Long double (80-bit) - + Half float (16-bit) - - + + Value Değer - - + + Comments Yorumlar - + Edit data at %1 Veri düzenle -> %1 - + Fill data at %1 Veri doldur -> %1 - + Save to file Dosyayı kaydet - + All files (*.*) Tüm dosyalar (*. *) - + Find Pattern... Pattern(Şablon) Bul... - + Selection not in a file... Seçim bir dosyada değil... - + Dump Döküm - + Enter expression to sync with... Senkronize yapılacak ifadeyi girin... - + Size Boyut - + Warning Uyarı - + You're trying to allocate a zero-sized buffer just now. You're trying to allocate a zero-sized buffer just now. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. - + Memory allocation failed! Hafızada yer ayırma başarısız oldu! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value Değeri değiştir - + Increment value Değeri arttırma - + Decrement value Değeri azaltma - + Zero value Sıfır değer - + Toggle Değiştir - + Undo Geri Al - + Follow in Disassembler Disassembler'de Takip Et - + Follow in Dump Döküm'de &Takip Et - + Follow in Stack Yığında Takip Et - + Follow in Memory Map Hafıza Haritası'nda İzle - + &Remove hardware breakpoint Donanımsal Kesme Noktasını Kaldır - + Increment x87 Stack Yığın Artışı -> x87 - + Decrement x87 Stack Yığın Azaltma -> x87 - + Highlight Vurgula - + Error Hata - - + + Edit %1 - - - - - + + + + + Edit Düzenle - - + + Edit %1 register - + Edit FPU register FPU Kaydedici Düzenle - + ERROR CONVERTING TO HEX HEX'E DÖNÜŞTÜRME HATASI - + Set Last Error Son Hatayı Ayarla - + Set Last Status Son Durum Ayarı - + Follow in &Dump Döküm'de &Takip Et - + Copy old value: %1 - + Set Hardware Breakpoint on %1 Donanım Kesme Noktasını %1 üzerine ayarla @@ -3882,261 +3861,292 @@ CommonActions - + Follow in Disassembler Disassembler'de Takip Et - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler &Disassembler'de DWORD Takip Et - + &Follow QWORD in Disassembler &Disassembler'de QWORD Takip Et - + Follow in Dump Döküm'de &Takip Et - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump &Geçerli Döküm'de DWORD Takip Et - + &Follow QWORD in Current Dump &Geçerli Döküm'de QWORD Takip Et - + Dump %1 Döküm %1 - + Follow DWORD in Dump Döküm'de DWORD Takip Et - + Follow QWORD in Dump Döküm'de QWORD Takip Et - + Follow in Stack Yığında Takip Et - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Hafıza Haritası'nda İzle - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Grafik - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Değiştir - - + + Edit Düzenle - - + + Set Hardware on Execution Yürütme Anı İçin Donanımsal Kesme - + Remove Hardware Donanımsal Kesmeyi Sil - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Kesme noktası - + Set Conditional Breakpoint Koşullu Kesme Noktası Ata - + Replace Slot %1 (0x%2) Yuvayı Değiştir %1 (0x%2) - + Label Current Address Geçerli Adres Etiketi - + Comment Açıklama - + Toggle Bookmark Yer İşaretini Değiştir - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Burayı %1 e ayarla - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here Yeni işlem oluştur(Buraya) - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD İzle DWORD - + &Watch QWORD İzle QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. %1 takip edilemiyor. Adres geçersizdir. - + Add label at Etiket ekle -> - + The label may be in use Etiket kullanımda olabilir - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Etiket "%1" varolan bir etiket veya geçerli bir ifade olabilir. Böyle bir etiketin kullanılması istenmeyen etkilere neden olabilir. Yine de devam etmek istiyormusunuz? - - - + + + Error! Hata! - + DbgSetLabelAt failed! DbgSetLabelAt başarısız oldu! - + Add comment at Yorum ekle -> - + DbgSetCommentAt failed! DbgSetCommentAt başarısız oldu! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt başarısız oldu! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? Burada yazılım kesme noktasının ayarlanması, çökme ile sonuçlanabilir. Gerçekten devam etmek istiyormusunuz? - + + Error + Hata + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? Yeni başlangıç noktası ayarlamak, çökmeye sebeb olabilir. Gerçekten devam etmek istiyor musunuz? - + Creating new thread here may result in crash. Do you really want to continue? Yeni işlem oluşturma, çökmeye sebeb olabilir. Gerçekten devam etmek istiyor musunuz? - + Argument for the new thread @@ -4836,12 +4846,13 @@ - + + Actions Eylemler @@ -5501,97 +5512,102 @@ + Display type + + + + Freeze the stack Yığını dondur - + Go to Base of Stack Frame Yığın Çerçevesinin Tabanına Git - + Go to Previous Stack Frame Önceki Yığın Çerçevesine Git - + Go to Next Stack Frame Sonraki Yığın Çerçevesine Git - + Go to Previous Reference Önceki referansa git - + Go to Next Reference Sonraki Referansa Git - + Modify value Değeri değiştir - + Watch DWORD/QWORD DWORD/QWORD İzle - + Copy File Offset Dosya İçi Pozisyonu Kopyala - + Start/Stop trace recording İz kaydını Başlat/Durdur - + Copy -> Cropped Table - + Copy -> Table Kopyala -> Tablo - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! KONFİGÜRASYON'DA BULUNAMADI! @@ -6017,7 +6033,7 @@ - + Done! Bitti! @@ -8318,29 +8334,29 @@ SizeofType başarısız oldu - + VisitType failed VisitType başarısız oldu - + RemoveType failed RemoveType başarısız oldu - + Type %s removed Tip %s silindi - + LoadTypes failed LoadTypes başarısız oldu - + Types loaded Types yüklendi @@ -9718,169 +9734,169 @@ Do you want to continue debugging? StaticFileUnload başarısız oldu - + [PLUGIN] %s already loaded [EKLENTİ] %s zaten yüklendi - + [PLUGIN] Cannot find plugin: %s [EKLENTİ] Eklenti bulunamıyor: %s - + [PLUGIN] Failed to load plugin: %s [EKLENTİ] Eklenti yüklenemedi: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [EKLENTİ] Dışarıya aktarılıcak "pluginit" eklenti içinde bulunamadı: %s - + [PLUGIN] pluginit failed for plugin: %s [EKLENTİ] pluginit eklenti için başarısız oldu: %s - + [PLUGIN] %s is incompatible with this SDK version [EKLENTİ] %s bu SDK versiyonu ile uyumsuz - + [PLUGIN] %s v%d Loaded! [EKLENTİ] %s v%d Yüklendi! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] GuiMenuAdd(%d) Eklentisi için başarısız oldu: %s - + [PLUGIN] %s unloaded [EKLENTİ] %s çıkarıldı - + [PLUGIN] %s not found [EKLENTİ] %s bulunamadı - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [EKLENTİ] Geçersiz eklenti tutamacı %d... - + [PLUGIN, %s] Command "%s" failed to register... [EKLENTİ, %s] Komut "%s" kaydı başarısız oldu... - + [PLUGIN, %s] Command "%s" registered! [EKLENTİ, %s] Komut "%s" kaydedildi! - + [PLUGIN, %s] Command "%s" unregistered! [EKLENTİ, %s] Komut "%s" silindi! - + [PLUGIN, %s] Command "%s" failed to unregister... [EKLENTİ, %s] Komut "%s" kaydı silinemedi... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [EKLENTİ, %s] Fonksiyon ifadesi kaydı "%s" başarısız oldu... - - + + [PLUGIN, %s] Expression function "%s" registered! [EKLENTİ, %s] Fonksiyon ifadesi "%s" kaydedildi! - + [PLUGIN, %s] Expression function "%s" unregistered! [EKLENTİ, %s] Fonksiyon ifadesi "%s" silindi! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [EKLENTİ, %s] Fonksiyon ifadesi kaydı "%s" silinemedi... - + [PLUGIN, %s] Format function "%s" failed to register... [EKLENTİ, %s] Fonksiyon ifadesi kaydı "%s" başarısız oldu... - + [PLUGIN, %s] Format function "%s" registered! [EKLENTİ, %s] Fonksiyon formatı "%s" kaydedildi! - + [PLUGIN, %s] Format function "%s" unregistered! [EKLENTİ, %s] Fonksiyon formatı "%s" kaydedilmedi! - + [PLUGIN, %s] Format function "%s" failed to unregister... [EKLENTİ, %s] Fonksiyon formatı "%s" kaydı başarısız oldu... @@ -10119,53 +10135,53 @@ Do you want to continue debugging? - + Failed to add %s %s; %s %s ekleme hatası; - + Failed to add function %s %s() %s %s() fonksiyonu ekleme hatası - + Failed to add enum %s - + Failed to add typedef %s %s; %s %s ekleme hatası; - + Failed to add member %s %s.%s; %s %s.%s üyesi ekleme hatası; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; %s %s.%s argümanları ekleme hatası; @@ -14463,7 +14479,7 @@ Bu yamaları yine de uygulamak istiyor musunuz? RegistersView - + AVX-512 isn't supported on this computer. @@ -16152,90 +16168,90 @@ TEB, Win32 API'sini çağırmadan süreç hakkında bir çok bilgi almak için k Değer - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address Adres değiştir - + Display type - - + + Load JSON JSON Yükle - - + + Parse header Başlığı ayrıştır - + Remove Kaldır - + Clear Temizle - + &Refresh &Yenile - + &Copy &Kopyala - + Error Hata - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON dosyaları (*.json);;Tüm dosyalar (*.*) - + Header files (*.h *.hpp);;All files (*.*) Başlık dosyaları (*.h *.hpp);;Tüm dosyalar (*.*) diff --git a/x64dbg_uk_UA.ts b/x64dbg_uk_UA.ts index 586f4aa..e4174b8 100644 --- a/x64dbg_uk_UA.ts +++ b/x64dbg_uk_UA.ts @@ -2593,67 +2593,67 @@ - + Signed byte (8-bit) Signed byte (8 біт) - + Signed short (16-bit) Signed short (16 біт) - + Signed long (32-bit) Signed long (32 біт) - + Signed long long (64-bit) Signed long long (64 біт) - + Unsigned byte (8-bit) Unsigned byte (8 біт) - + Unsigned short (16-bit) Unsigned short (16 біт) - + Unsigned long (32-bit) Unsigned long (32 біт) - + Unsigned long long (64-bit) Unsigned long long (64 біт) - + Hex short (16-bit) Hex short (16 біт) - + Hex long (32-bit) Hex long (32 біт) - + Hex long long (64-bit) Hex long long (64 біт) @@ -2698,250 +2698,229 @@ &Дизасембльований код - - Display type - Тип відображення - - - - + + System Code Системний код - + System Data Системні дані - - + + User Code Код користувача - + User Data Дані користувача - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (Рядок) - + (Unknown String) (Невідомий рядок) - - - + + + Modify value Змінити значення - - - - - + + + + Error Помилка - - + + The input text is not a number! Введений текст не є числом! - + Enter expression to follow in Dump... Введіть вираз, щоб перейти до дампа... - - + + Error! Помилка! - + Not inside a module... Не всередині модуля... - + Goto File Offset in %1 Перейти до зміщення в файлі %1 - - - - + + + + Hex Шістнадцятковий - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32 біт) - + Double (64-bit) Double (64 біт) - + Long double (80-bit) Long double (80 біт) - + Half float (16-bit) Половина плаваючого (16 біт) - - + + Value Значення - - + + Comments Коментарі - + Edit data at %1 Редагування даних по адресу %1 - + Fill data at %1 Заповнення даних по адресу %1 - + Save to file Зберегти до файлу - + All files (*.*) Усі файли (*.*) - + Find Pattern... Пошук шаблону... - + Selection not in a file... Віділене не у файлі... - + Dump Дамп - + Enter expression to sync with... Введіть вираз для синхронізації з... - + Size Розмір - + Warning Попередження - + You're trying to allocate a zero-sized buffer just now. Ви намагаєтеся виділити буфер з нульовим розміром. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Розмір буферу, який ви намагаєтеся виділити перевищує 1ГБ. Будь ласка, перевірте свій вираз, щоб переконатися, що все вірно. - + Memory allocation failed! Не вдалося виділити пам'ять! - - - No types loaded yet, parse a header first... - Немає завантажених типів, спочатку аналізуйте заголовок... - - - - Type to display - Тип для відображення - - - - Address to display %1 at - Адреса для відображення %1 в - CPUInfoBox @@ -3094,133 +3073,133 @@ CPURegistersView - + Modify value Змінити значення - + Increment value Збільшити значення - + Decrement value Зменшити значення - + Zero value Нульове значення - + Toggle Переключити - + Undo Скасувати - + Follow in Disassembler Перейти до дизасембльованого коду - + Follow in Dump Перейти до дампа - + Follow in Stack Перейти до стека - + Follow in Memory Map Перейти до мапи пам'яті - + &Remove hardware breakpoint &Видалити апаратну точку зупину - + Increment x87 Stack Збільшити стек x87 - + Decrement x87 Stack Зменшити стек x87 - + Highlight Виділення - + Error Помилка - - + + Edit %1 Редагувати %1 - - - - - + + + + + Edit Редагування - - + + Edit %1 register Редагувати %1 регістр - + Edit FPU register Редагувати регістр FPU - + ERROR CONVERTING TO HEX ПОМИЛКА КОНВЕРТАЦІЯ ДО HEX - + Set Last Error Встановити останню помилку - + Set Last Status Встановити останній статус - + Follow in &Dump Перейти до &дампа - + Copy old value: %1 Копіювати старе значення: %1 - + Set Hardware Breakpoint on %1 Встановити апаратну точку зупину на %1 @@ -3886,261 +3865,292 @@ CommonActions - + Follow in Disassembler Перейти до дизасембльованого коду - + Show this address in disassembler. Equivalent command "d address". Показувати цю адресу в дизасемблері. Еквівалентне командування "d адреса". - + &Follow DWORD in Disassembler &Перейти по DWORD в дизасембльований код - + &Follow QWORD in Disassembler &Перейти до QWORD в дизасембльований код - + Follow in Dump Перейти до дампа - + Show the address in dump. Equivalent command "dump address". Покажіть адресу у дампі. Еквівалентна команда "dump adress". - + &Follow DWORD in Current Dump &Перейти по DWORD у поточний дамп - + &Follow QWORD in Current Dump &Перейти по QWORD у поточний дамп - + Dump %1 Дамп %1 - + Follow DWORD in Dump Перейти по DWORD в дамп - + Follow QWORD in Dump Перейти до QWORD в дампу - + Follow in Stack Перейти до стека - + Show this address in stack view. Equivalent command "sdump address". Показати адресу у дампі. Еквівалентна команда "іdump adress". - + Follow in Memory Map Перейти до мапи пам'яті - + Show this address in memory map view. Equivalent command "memmapdump address". Відобразити цю адресу у вигляді мапи пам'яті. Еквіваленне команда "memmapdump address". - + Graph Граф - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". Показати графік потоку керування цієї функції в режимі перегляду ЦП. Еквівалентна команда "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Переключити - - + + Edit Редагування - - + + Set Hardware on Execution Встановити апаратну точку зупину на виключення - + Remove Hardware Видалити апаратну точку зупину - - - - + + + + Replace Slot %1 (Unknown) Замінити слот %1 (невідомо) - + Breakpoint Точка зупину - + Set Conditional Breakpoint Встановити умовну точку зупину - + Replace Slot %1 (0x%2) Замінити слот %1 (0x%2) - + Label Current Address Додати мітку до поточної адреси - + Comment Коментар - + Toggle Bookmark Встановити закладку - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". Встановіть закладку тут, або видаліть закладку. Еквівалентна команда "bookmarkset address"/"bookmarkdel address". - + Set %1 Here Встановити %1 тут - + Set the next executed instruction to this address. Equivalent command "mov cip, address". Встановити наступну виконану інструкцію на цю адресу. Еквівалентна команда "mov cip, address". - + Create New Thread Here Створити новий потік тут - + Create a new thread at this address. Equivalent command "createthread address, argument". Створити новий потік на цьому адресі. Еквівалентне команда "createthread address, argument". - + &Watch DWORD &Перегляд DWORD - + &Watch QWORD &Перегляд QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". Додайте адресу у вікні перегляду. Еквівалентна команда "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. Не вдалося перейти за адресо %1. Адреса недійсна. - + Add label at Додавання мітки до - + The label may be in use Можливо мітка вже використовується - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? "%1" може бути існуючою міткою або правильним виразом. Використання такої мітки може мати небажані наслідки. Продовжити? - - - + + + Error! Помилка! - + DbgSetLabelAt failed! Не вдалося виконати DbgSetLabelAt! - + Add comment at Додати коментар до - + DbgSetCommentAt failed! Не вдалося виконати DbgSetCommentAt! - + DbgSetBookmarkAt failed! Не вдалося виконати DbgSetBookmarkAt! - + Address %1 is not executable Адреса %1 не виконувана - + Setting software breakpoint here may result in crash. Do you really want to continue? Встановлення програмної точки зупину тут може призвести до збою. Ви дійсно бажаєте продовжити? - + + Error + Помилка + + + + No types loaded yet, parse a header first... + Немає завантажених типів, спочатку аналізуйте заголовок... + + + + Type to display at %1 + + + + + Address to display %1 at + Адреса для відображення %1 в + + + Setting new origin here may result in crash. Do you really want to continue? Встановлення нового початку виконання тут може призвести до краху. Ви дійсно хочете продовжити? - + Creating new thread here may result in crash. Do you really want to continue? Створення нового потоку може призвести до збою. Ви дійсно хочете продовжити? - + Argument for the new thread Аргумент для нового потоку @@ -4840,12 +4850,13 @@ - + + Actions Дії @@ -5505,97 +5516,102 @@ + Display type + Тип відображення + + + Freeze the stack Заморозити стек - + Go to Base of Stack Frame Перейти до бази кадру стеку - + Go to Previous Stack Frame Перейти до попереднього кадру стека - + Go to Next Stack Frame Перейти до наступного кадру стека - + Go to Previous Reference Перейти до попереднього посилання - + Go to Next Reference Перейти до наступного посилання - + Modify value Змінити значення - + Watch DWORD/QWORD Перегляд DWORD/QWORD - + Copy File Offset Копіювати зміщення в файлі - + Start/Stop trace recording Розпочати/Зупинити запис трасування - + Copy -> Cropped Table Копіювати -> Обрізана таблиця - + Copy -> Table Копіювати -> Таблиця - + Copy -> Line, To Log Копіювати -> Рядок до журналу - + Copy -> Cropped Table, To Log Копіювати -> Обрізана таблиця до журналу - + Copy -> Table, To Log Копіювати -> Таблиця до журналу - + Copy -> Export Table Копіювати -> Експортувати таблицю - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! НЕ ЗНАЙДЕНО У КОНФІГУРАЦІЇ! @@ -6021,7 +6037,7 @@ - + Done! Готово! @@ -8290,29 +8306,29 @@ Не вдалося виконати SizeofType - + VisitType failed Не вдалося виконати VisitType - + RemoveType failed Не вдалося виконати RemoveType - + Type %s removed Тип %s видалено - + LoadTypes failed Не вдалося виконати LoadTypes - + Types loaded Типи завантажено @@ -9706,163 +9722,163 @@ Do you want to continue debugging? Не вдалося виконати StaticFileUnload! - + [PLUGIN] %s already loaded [PLUGIN] %s вже завантажено - + [PLUGIN] Cannot find plugin: %s [PLUGIN] Не вдалося знайти плагін: %s - + [PLUGIN] Failed to load plugin: %s [PLUGIN] Не вдалося завантажити плагін: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s [PLUGIN] Експортована функція "pluginit" не знайдена в плагіні: %s - + [PLUGIN] pluginit failed for plugin: %s [PLUGIN] Збій pluginit для плагіна: %s - + [PLUGIN] %s is incompatible with this SDK version [PLUGIN] %s несумісна з цією версією SDK - + [PLUGIN] %s v%d Loaded! [PLUGIN] %s v%d завантажено! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] Помилка GuiMenuAdd(%d) для плагіна: %s - + [PLUGIN] %s unloaded [PLUGIN] %s вивантажено - + [PLUGIN] %s not found [PLUGIN] %s не знайдено - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' [PLUGIN] Ігнорування плагіна верхнього рівня на користь каталогу 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [PLUGIN] Некоректний обробник плагіна %d... - + [PLUGIN, %s] Command "%s" failed to register... [PLUGIN, %s] Не вдалося зареєструвати команду "%s"... - + [PLUGIN, %s] Command "%s" registered! [PLUGIN, %s] Команду "%s" зареєстровано! - + [PLUGIN, %s] Command "%s" unregistered! [PLUGIN, %s] Команду "%s" не зареєстровано! - + [PLUGIN, %s] Command "%s" failed to unregister... [PLUGIN, %s] Не вдалося зареєструвати команду "%s"... - - + + [PLUGIN, %s] Expression function "%s" failed to register... [PLUGIN, %s] Помилка реєстрації функції виразу "%s" ... - - + + [PLUGIN, %s] Expression function "%s" registered! [PLUGIN, %s] Функція виразу "%s" зареєстрована! - + [PLUGIN, %s] Expression function "%s" unregistered! [PLUGIN, %s] Функція виразу "%s" не зареєстрована! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [PLUGIN, %s] Помилка при скасуванні реєстрації функції виразу "%s"... - + [PLUGIN, %s] Format function "%s" failed to register... [PLUGIN, %s] Помилка реєстрації функції форматування "%s" ... - + [PLUGIN, %s] Format function "%s" registered! [PLUGIN, %s] Функція форматування "%s" зареєстрована! - + [PLUGIN, %s] Format function "%s" unregistered! [PLUGIN, %s] Функція форматування "%s" не зареєстрована! - + [PLUGIN, %s] Format function "%s" failed to unregister... [PLUGIN, %s] Помилка при скасуванні реєстрації функції форматування "%s"... @@ -10099,56 +10115,56 @@ Do you want to continue debugging? - + Failed to add %s %s; Не вдалося додати %s %s; - + Failed to add function %s %s() Не вдалося додати функцію %s %s() - + Failed to add enum %s Не вдалось додати enum %s - + Failed to add typedef %s %s; Не вдалося додати typedef %s %s; - + Failed to add member %s %s.%s; Не вдалося додати член %s %s.%s; - + Failed to add enum member %s Не вдалося додати учасника enum %s - + Failed to add return type %s.%s; Не вдалося додати тип повернення %s.%s; - + Failed to add argument %s %s.%s; Не вдалося додати аргумент %s %s.%s; @@ -14445,7 +14461,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16134,90 +16150,90 @@ TEB може бути використаний для отримання інф Значення - + &Follow address in Dump &Перейти за адресою в дамп - + Follow value in Dump Перейти до значення в дампі - + Follow value in Disassembler Перейти за значенням в дизасемблер - - + + Change address Змінити адресу - + Display type Тип відображення - - + + Load JSON Завантажити JSON - - + + Parse header Аналізувати заголовок - + Remove Видалити - + Clear Очистити - + &Refresh &Оновити - + &Copy &Копіювати - + Error Помилка - + No types loaded yet, parse a header first... Немає завантажених типів, спочатку аналізуйте заголовок... - + Type to display Тип для відображення - + Address to display %1 at Адреса для відображення %1 в - + JSON files (*.json);;All files (*.*) JSON файли (*.json);;Всі файли (*.*) - + Header files (*.h *.hpp);;All files (*.*) Файли заголовків (*.h *.hpp);;Всі файли (*.*) diff --git a/x64dbg_vi_VN.ts b/x64dbg_vi_VN.ts index 1bbe191..9e58579 100644 --- a/x64dbg_vi_VN.ts +++ b/x64dbg_vi_VN.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) Byte có dấu (8-bit) - + Signed short (16-bit) Short có dấu (16-bit) - + Signed long (32-bit) Long có dấu (32-bit) - + Signed long long (64-bit) Long long có dấu (32-bit) - + Unsigned byte (8-bit) Byte không dấu (8-bit) - + Unsigned short (16-bit) - + Unsigned long (32-bit) - + Unsigned long long (64-bit) - + Hex short (16-bit) - + Hex long (32-bit) - + Hex long long (64-bit) @@ -2694,250 +2694,229 @@ - - Display type - - - - - + + System Code - + System Data Dữ liệu hệ thống - - + + User Code - + User Data Dữ liệu chương trình - + (Real4) - + (Real8) - + (BYTE) - + (WORD) - + (DWORD) - - + + (QWORD) - + (String) - + (Unknown String) - - - + + + Modify value Thay đổi giá trị - - - - - + + + + Error Lỗi - - + + The input text is not a number! - + Enter expression to follow in Dump... Điền biểu thức để hiển thị trong Dump... - - + + Error! Lỗi! - + Not inside a module... Không nằm trong module... - + Goto File Offset in %1 Hiển thị File Offset trong %1 - - - - + + + + Hex Hex - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) - + Double (64-bit) - + Long double (80-bit) - + Half float (16-bit) - - + + Value - - + + Comments Ghi chú - + Edit data at %1 Thay đổi dữ liệu tại %1 - + Fill data at %1 Thay đổi hết giá trị tại %1 - + Save to file Lưu vào file - + All files (*.*) Tất cả file (*.*) - + Find Pattern... Tìm theo pattern... - + Selection not in a file... Phần được chọn không nằm trong file... - + Dump Dump - + Enter expression to sync with... Điền biểu thức để thực hiện đồng bộ với... - + Size Kích thước - + Warning Cảnh báo - + You're trying to allocate a zero-sized buffer just now. Bạn vừa mới cố gắng cấp phát một vùng nhớ có kích thước rỗng. - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. Kích thước vùng nhớ bạn đang muốn cấp phát vượt quá 1GB. Hãy kiểm tra lại biểu thức để đảm bảo không có gì sai sót. - + Memory allocation failed! Cấp phát vùng nhớ thất bại! - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3085,133 +3064,133 @@ CPURegistersView - + Modify value Thay đổi giá trị - + Increment value - + Decrement value - + Zero value - + Toggle Bật/Tắt - + Undo Hoàn tác - + Follow in Disassembler Hiển thị trong Disassembler - + Follow in Dump Hiển thị trong Dump - + Follow in Stack Hiển thị trong stack - + Follow in Memory Map Hiển thị trong Memory Map - + &Remove hardware breakpoint - + Increment x87 Stack - + Decrement x87 Stack - + Highlight - + Error Lỗi - - + + Edit %1 - - - - - + + + + + Edit (&E) Sửa - - + + Edit %1 register - + Edit FPU register - + ERROR CONVERTING TO HEX - + Set Last Error - + Set Last Status - + Follow in &Dump - + Copy old value: %1 - + Set Hardware Breakpoint on %1 @@ -3877,260 +3856,291 @@ CommonActions - + Follow in Disassembler Hiển thị trong Disassembler - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler (&F) Hiển thị DWORD trong Disassembler - + &Follow QWORD in Disassembler (&F) Hiển thị QWORD trong Disassembler - + Follow in Dump Hiển thị trong Dump - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump (&F) Hiển thị DWORD trong cửa sổ Dump hiện tại - + &Follow QWORD in Current Dump (&F) Hiển thị QWORD trong cửa sổ Dump hiện tại - + Dump %1 Dump %1 - + Follow DWORD in Dump Hiển thị DWORD trong Dump - + Follow QWORD in Dump Hiển thị QWORD trong Dump - + Follow in Stack Hiển thị trong stack - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map Hiển thị trong Memory Map - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph Lược đồ - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle Bật/Tắt - - + + Edit (&E) Sửa - - + + Set Hardware on Execution - + Remove Hardware - - - - + + + + Replace Slot %1 (Unknown) - + Breakpoint Breakpoint - + Set Conditional Breakpoint Đặt Breakpoint có điều kiện - + Replace Slot %1 (0x%2) - + Label Current Address - + Comment Ghi chú - + Toggle Bookmark - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD - + &Watch QWORD - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. - + Add label at Thêm nhãn tại - + The label may be in use Nhãn này có thể đã được sử dụng - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? Nhãn "%1" có thể đã có, hoặc là một biểu thức hợp lệ. Sử dụng các nhãn thể này có thể tạo ra những lỗi không xác định. Bạn vẫn muốn thực hiện? - - - + + + Error! Lỗi! - + DbgSetLabelAt failed! DbgSetLabelAt thất bại! - + Add comment at Thêm ghi chú tại - + DbgSetCommentAt failed! DbgSetCommentAt thất bại! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt thất bại! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? - + + Error + Lỗi + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? - + Creating new thread here may result in crash. Do you really want to continue? - + Argument for the new thread @@ -4830,12 +4840,13 @@ - + + Actions Hành động @@ -5495,97 +5506,102 @@ + Display type + + + + Freeze the stack Đóng băng stack - + Go to Base of Stack Frame Đến đầu của Stack Frame - + Go to Previous Stack Frame Đến stack frame trước đó - + Go to Next Stack Frame Đến stack frame tiếp theo - + Go to Previous Reference - + Go to Next Reference - + Modify value Thay đổi giá trị - + Watch DWORD/QWORD - + Copy File Offset Sao chép File Offset - + Start/Stop trace recording - + Copy -> Cropped Table - + Copy -> Table - + Copy -> Line, To Log - + Copy -> Cropped Table, To Log - + Copy -> Table, To Log - + Copy -> Export Table - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! Không tìm thấy trong file cài đặt @@ -6002,7 +6018,7 @@ - + Done! @@ -8179,28 +8195,28 @@ - + VisitType failed - + RemoveType failed - + Type %s removed - + LoadTypes failed - + Types loaded @@ -9512,147 +9528,147 @@ Do you want to continue debugging? - + [PLUGIN] %s already loaded - + [PLUGIN] Cannot find plugin: %s - + [PLUGIN] Failed to load plugin: %s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded - + [PLUGIN] %s not found - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... - + [PLUGIN, %s] Command "%s" registered! - + [PLUGIN, %s] Command "%s" unregistered! - + [PLUGIN, %s] Command "%s" failed to unregister... - - + + [PLUGIN, %s] Expression function "%s" failed to register... - - + + [PLUGIN, %s] Expression function "%s" registered! - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... - + [PLUGIN, %s] Format function "%s" failed to register... - + [PLUGIN, %s] Format function "%s" registered! - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... @@ -9874,49 +9890,49 @@ Do you want to continue debugging? - + Failed to add %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14178,7 +14194,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15856,90 +15872,90 @@ The TEB can be used to get a lot of information on the process without calling W - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address - + Display type - - + + Load JSON - - + + Parse header - + Remove Xoá - + Clear Xóa - + &Refresh Làm mới - + &Copy &Chép - + Error Lỗi - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) - + Header files (*.h *.hpp);;All files (*.*) diff --git a/x64dbg_zh_CN.ts b/x64dbg_zh_CN.ts index 080dd26..4a8d83a 100644 --- a/x64dbg_zh_CN.ts +++ b/x64dbg_zh_CN.ts @@ -2591,67 +2591,67 @@ - + Signed byte (8-bit) 有符号字节(8位) - + Signed short (16-bit) 有符号Short(16位) - + Signed long (32-bit) 有符号Long(32位) - + Signed long long (64-bit) 有符号Long long(64位) - + Unsigned byte (8-bit) 无符号字节(8位) - + Unsigned short (16-bit) 无符号Short(16位） - + Unsigned long (32-bit) 无符号Long(32位) - + Unsigned long long (64-bit) 无符号Long long(64位) - + Hex short (16-bit) 十六进制Short(16位) - + Hex long (32-bit) 十六进制Long(32位) - + Hex long long (64-bit) 十六进制Long long(64位) @@ -2696,250 +2696,229 @@ 反汇编(&D) - - Display type - 显示类型 - - - - + + System Code 系统代码 - + System Data 系统数据 - - + + User Code 用户代码 - + User Data 用户数据 - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (字符串) - + (Unknown String) (未知字符串) - - - + + + Modify value 修改 - - - - - + + + + Error 错误 - - + + The input text is not a number! 输入文本不是数字！ - + Enter expression to follow in Dump... 输入将在内存窗口中转到的表达式... - - + + Error! 错误! - + Not inside a module... 不在已知模块中... - + Goto File Offset in %1 转到%1中的文件偏移 - - - - + + + + Hex 十六进制 - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) Float (32位) - + Double (64-bit) Double (64位) - + Long double (80-bit) Long double (80位) - + Half float (16-bit) 半精度浮点数 (16位) - - + + Value 值 - - + + Comments 注释 - + Edit data at %1 编辑数据于 %1 - + Fill data at %1 填充数据到 %1 - + Save to file 保存到文件 - + All files (*.*) 所有文件 (*.*) - + Find Pattern... 搜索匹配特征... - + Selection not in a file... 选区不在一个文件中…… - + Dump 内存窗口 - + Enter expression to sync with... 输入要同步到的表达式... - + Size 大小 - + Warning 警告 - + You're trying to allocate a zero-sized buffer just now. 您刚刚想要分配一个大小为零的缓冲区。 - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. 您想要分配的缓冲区大小已经超过了1GB。请检查您的表达式，确认输入无误。 - + Memory allocation failed! 内存分配失败! - - - No types loaded yet, parse a header first... - 没有加载结构体，请先解析头文件…… - - - - Type to display - 显示的结构体 - - - - Address to display %1 at - %1 显示在地址 - CPUInfoBox @@ -3089,133 +3068,133 @@ CPURegistersView - + Modify value 修改 - + Increment value 加1 - + Decrement value 减1 - + Zero value 清零值 - + Toggle 切换 - + Undo 撤消 - + Follow in Disassembler 在反汇编中转到 - + Follow in Dump 在内存窗口中转到 - + Follow in Stack 在栈中转到 - + Follow in Memory Map 在内存布局中转到 - + &Remove hardware breakpoint 删除硬件断点(&R) - + Increment x87 Stack 递增x87浮点寄存器栈 - + Decrement x87 Stack 递减x87浮点寄存器栈 - + Highlight 高亮 - + Error 错误 - - + + Edit %1 编辑 %1 - - - - - + + + + + Edit 编辑 - - + + Edit %1 register 编辑%1寄存器 - + Edit FPU register 编辑FPU寄存器 - + ERROR CONVERTING TO HEX 转换到十六进制时发生错误 - + Set Last Error 设置上次错误 - + Set Last Status 设置上次状态 - + Follow in &Dump 在内存窗口中转到(&D) - + Copy old value: %1 复制旧值：%1 - + Set Hardware Breakpoint on %1 设置硬件断点于 %1 @@ -3882,261 +3861,292 @@ CommonActions - + Follow in Disassembler 在反汇编中转到 - + Show this address in disassembler. Equivalent command "d address". 在反汇编窗口中显示此地址。等价于命令“d 地址”。 - + &Follow DWORD in Disassembler 在反汇编中转到指定DWORD(&F) - + &Follow QWORD in Disassembler 在反汇编中转到指定QWORD(&F) - + Follow in Dump 在内存窗口中转到 - + Show the address in dump. Equivalent command "dump address". 在内存窗口中显示此地址。等价于命令“dump 地址”。 - + &Follow DWORD in Current Dump 在当前内存窗口中转到指定DWORD(&F) - + &Follow QWORD in Current Dump 在当前内存窗口中转到指定QWORD(&F) - + Dump %1 内存 %1 - + Follow DWORD in Dump 在内存窗口中转到指定DWORD - + Follow QWORD in Dump 在内存窗口中转到指定QWORD - + Follow in Stack 在栈中转到 - + Show this address in stack view. Equivalent command "sdump address". 在堆栈窗口中显示此地址。等价于命令“sdump 地址”。 - + Follow in Memory Map 在内存布局中转到 - + Show this address in memory map view. Equivalent command "memmapdump address". 在内存布局窗口中显示此地址。等价于命令“memmapdump 地址”。 - + Graph 流程图 - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". 在CPU视图中显示此函数的控制流程图。等价于命令“graph 地址”。 - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle 切换 - - + + Edit 编辑 - - + + Set Hardware on Execution 设置硬件断点(执行) - + Remove Hardware 删除硬件断点 - - - - + + + + Replace Slot %1 (Unknown) 替换硬件断点 %1 (未知) - + Breakpoint 断点 - + Set Conditional Breakpoint 设置条件断点 - + Replace Slot %1 (0x%2) 替换硬件断点 %1 (0x%2) - + Label Current Address 给当前地址写标签 - + Comment 注释 - + Toggle Bookmark 切换书签 - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". 在此设置书签，或移除书签。等价于命令“bookmarkset 地址”/“bookmarkdel 地址”。 - + Set %1 Here 在此设置%1 - + Set the next executed instruction to this address. Equivalent command "mov cip, address". 设置将要执行的指令为此地址。等价于命令“mov cip, 地址”。 - + Create New Thread Here 新建线程于此 - + Create a new thread at this address. Equivalent command "createthread address, argument". 在此地址创建一个新的线程。等价于命令“createthread 地址, 参数”。 - + &Watch DWORD 监视 DWORD(&W) - + &Watch QWORD 监视 QWORD(&W) - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". 在监视视图中添加地址。等价于命令"AddWatch [地址], "uint"""。 - + Cannot follow %1. Address is invalid. 无法转到 %1 。地址无效。 - + Add label at 添加标签到 - + The label may be in use 标签可能正在使用中 - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? 标签“%1”可能早已定义或是一个有效的表达式。使用这种标签可能产生意外的影响。您仍想继续使用该标签吗？ - - - + + + Error! 错误! - + DbgSetLabelAt failed! DbgSetLabelAt 失败! - + Add comment at 添加注释到 - + DbgSetCommentAt failed! DbgSetCommentAt 失败! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt 失败! - + Address %1 is not executable 地址 %1 不可执行 - + Setting software breakpoint here may result in crash. Do you really want to continue? 在这里设置软件断点可能会导致崩溃。你真的想要继续吗？ - + + Error + 错误 + + + + No types loaded yet, parse a header first... + 没有加载结构体，请先解析头文件…… + + + + Type to display at %1 + + + + + Address to display %1 at + %1 显示在地址 + + + Setting new origin here may result in crash. Do you really want to continue? 在这里设置新的运行点可能会导致崩溃。你真的想要继续吗？ - + Creating new thread here may result in crash. Do you really want to continue? 在这里新建线程可能会导致崩溃。你真的想要继续吗？ - + Argument for the new thread 新线程的参数 @@ -4836,12 +4846,13 @@ - + + Actions 动作 @@ -5501,97 +5512,102 @@ + Display type + 显示类型 + + + Freeze the stack 锁定堆栈 - + Go to Base of Stack Frame 转到堆栈帧基址 - + Go to Previous Stack Frame 转到上一堆栈帧 - + Go to Next Stack Frame 转到下一堆栈帧 - + Go to Previous Reference 转到上一个引用 - + Go to Next Reference 转到下一个引用 - + Modify value 修改 - + Watch DWORD/QWORD 监视DWORD/QWORD - + Copy File Offset 复制文件偏移 - + Start/Stop trace recording 启动/停止运行跟踪 - + Copy -> Cropped Table 复制 -> 截断的表格 - + Copy -> Table 复制 -> 整个表格 - + Copy -> Line, To Log 复制 -> 行，到日志 - + Copy -> Cropped Table, To Log 复制 -> 截断的表格，到日志 - + Copy -> Table, To Log 复制 -> 整个表格，到日志 - + Copy -> Export Table 复制 -> 导出表 - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! 在配置中未找到! @@ -6022,7 +6038,7 @@ - + Done! 已完成！ @@ -8338,29 +8354,29 @@ SizeofType 失败 - + VisitType failed VisitType 失败 - + RemoveType failed RemoveType 失败 - + Type %s removed 类型 %s 已删除 - + LoadTypes failed LoadTypes 失败 - + Types loaded 类型已载入 @@ -9758,169 +9774,169 @@ Do you want to continue debugging? StaticFileUnload 失败 - + [PLUGIN] %s already loaded [插件] %s 早已载入 - + [PLUGIN] Cannot find plugin: %s [插件] 找不到插件: %s - + [PLUGIN] Failed to load plugin: %s [插件] 载入插件失败：“%s” - + [PLUGIN] Export "pluginit" not found in plugin: %s [插件] 插件中没有找到“pluginit”导出函数: %s - + [PLUGIN] pluginit failed for plugin: %s [插件] 插件函数pluginit失败: %s - + [PLUGIN] %s is incompatible with this SDK version [插件] %s 与本软件SDK版本不兼容 - + [PLUGIN] %s v%d Loaded! [插件] %s v%d 已经载入！ - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s [PLUGIN] GuiMenuAdd(%d) 失败于插件：%s - + [PLUGIN] %s unloaded [插件] %s 已经卸载 - + [PLUGIN] %s not found [插件] 找不到 %s - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' [插件]已忽略顶层的插件而使用目录'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... [插件]插件句柄%d无效…… - + [PLUGIN, %s] Command "%s" failed to register... [插件,%s]命令“%s”注册失败…… - + [PLUGIN, %s] Command "%s" registered! [插件,%s] 命令 "%s" 已经注册！ - + [PLUGIN, %s] Command "%s" unregistered! [插件,%s] 命令 "%s" 已经删除！ - + [PLUGIN, %s] Command "%s" failed to unregister... [插件,%s] 命令 "%s" 删除失败…… - - + + [PLUGIN, %s] Expression function "%s" failed to register... [插件,%s] 表达式函数“%s”注册失败…… - - + + [PLUGIN, %s] Expression function "%s" registered! [插件,%s] 表达式函数“%s”已经注册！ - + [PLUGIN, %s] Expression function "%s" unregistered! [插件,%s] 表达式函数“%s”已经删除！ - + [PLUGIN, %s] Expression function "%s" failed to unregister... [插件,%s] 表达式函数“%s”删除失败…… - + [PLUGIN, %s] Format function "%s" failed to register... [插件,%s]格式函数“%s”删除失败…… - + [PLUGIN, %s] Format function "%s" registered! [插件,%s]格式函数“%s”已经注册！ - + [PLUGIN, %s] Format function "%s" unregistered! [插件,%s] 格式函数“%s”已经删除！ - + [PLUGIN, %s] Format function "%s" failed to unregister... [插件,%s]格式函数“%s”删除失败…… @@ -10161,56 +10177,56 @@ Do you want to continue debugging? - + Failed to add %s %s; 未能添加 %s %s; - + Failed to add function %s %s() 函数 %s %s() 添加失败 - + Failed to add enum %s 未能添加枚举类型 %s - + Failed to add typedef %s %s; 类型定义 %s %s添加失败; - + Failed to add member %s %s.%s; 成员 %s %s.%s添加失败; - + Failed to add enum member %s 未能添加枚举值 %s - + Failed to add return type %s.%s; 未能添加返回类型 %s.%s； - + Failed to add argument %s %s.%s; 参数 %s %s.%s添加失败; @@ -14507,7 +14523,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -16192,90 +16208,90 @@ The TEB can be used to get a lot of information on the process without calling W 值 - + &Follow address in Dump 在内存窗口中转到地址(&F) - + Follow value in Dump 在内存窗口中转到值 - + Follow value in Disassembler 在反汇编中转到值 - - + + Change address 更改地址 - + Display type 显示类型 - - + + Load JSON 载入 JSON - - + + Parse header 解析头文件 - + Remove 删除 - + Clear 清除 - + &Refresh 刷新(&R) - + &Copy 复制(&C) - + Error 错误 - + No types loaded yet, parse a header first... 没有加载结构体，请先解析头文件…… - + Type to display 显示的结构体 - + Address to display %1 at %1 显示在地址 - + JSON files (*.json);;All files (*.*) JSON文件 (*.json);;所有文件 (*.*) - + Header files (*.h *.hpp);;All files (*.*) 头文件 (*.h *.hpp);;所有文件 (*.*) diff --git a/x64dbg_zh_TW.ts b/x64dbg_zh_TW.ts index 387ee2b..83c1f8e 100644 --- a/x64dbg_zh_TW.ts +++ b/x64dbg_zh_TW.ts @@ -2589,67 +2589,67 @@ - + Signed byte (8-bit) 有符號位元組(8位) - + Signed short (16-bit) 有符號Short(16位) - + Signed long (32-bit) 有符號Long(32位) - + Signed long long (64-bit) 有符號Long long(64位) - + Unsigned byte (8-bit) 無符號位元組(8位) - + Unsigned short (16-bit) 無符號Short(16位) - + Unsigned long (32-bit) 無符號Long(32位) - + Unsigned long long (64-bit) 無符號Long long(64位) - + Hex short (16-bit) 十六進位Short(16位) - + Hex long (32-bit) 十六進位Long(32位) - + Hex long long (64-bit) 十六進位Long long(64位) @@ -2694,250 +2694,229 @@ 反組譯(&D) - - Display type - - - - - + + System Code 系統代碼 - + System Data 系統資料 - - + + User Code 使用者代碼 - + User Data 使用者資料 - + (Real4) (Real4) - + (Real8) (Real8) - + (BYTE) (BYTE) - + (WORD) (WORD) - + (DWORD) (DWORD) - - + + (QWORD) (QWORD) - + (String) (字串) - + (Unknown String) (未知字串) - - - + + + Modify value 修改值 - - - - - + + + + Error 錯誤 - - + + The input text is not a number! 輸入的內容不是數字！ - + Enter expression to follow in Dump... - - + + Error! 錯誤！ - + Not inside a module... 不在模組中... - + Goto File Offset in %1 前往 %1 中的檔案偏移 - - - - + + + + Hex 十六進位 - - - + + + ASCII ASCII - - - + + + UNICODE UNICODE - + Float (32-bit) 浮點數 （32 位） - + Double (64-bit) 雙浮點數 (64位元) - + Long double (80-bit) Long double (80位元) - + Half float (16-bit) - - + + Value 值 - - + + Comments 註解 - + Edit data at %1 編輯資料於 %1 - + Fill data at %1 填充資料於 %1 - + Save to file 儲存到檔案 - + All files (*.*) 所有檔案 (*.*) - + Find Pattern... 搜尋匹配特徵... - + Selection not in a file... 選區不在檔中…… - + Dump 資料視窗 - + Enter expression to sync with... - + Size 大小 - + Warning 警告 - + You're trying to allocate a zero-sized buffer just now. 你剛剛想要分配一個大小為零的緩衝區。 - + The size of buffer you're trying to allocate exceeds 1GB. Please check your expression to ensure nothing is wrong. 您想要分配的緩衝區大小超過 1GB. 請檢查輸入的運算式是否正確. - + Memory allocation failed! 記憶體分配失敗！ - - - No types loaded yet, parse a header first... - - - - - Type to display - - - - - Address to display %1 at - - CPUInfoBox @@ -3087,133 +3066,133 @@ CPURegistersView - + Modify value 修改值 - + Increment value 加1 - + Decrement value 减1 - + Zero value 清零值 - + Toggle 切換 - + Undo 復原 - + Follow in Disassembler 在反組譯視窗中跟隨 - + Follow in Dump 在資料視窗中跟隨 - + Follow in Stack 在堆疊中跟隨 - + Follow in Memory Map 在記憶體映射中跟隨 - + &Remove hardware breakpoint 移除硬體中斷點(&R) - + Increment x87 Stack 遞增 x87 堆疊 - + Decrement x87 Stack 递减x87堆疊 - + Highlight 突顯 - + Error 錯誤 - - + + Edit %1 編輯 %1 - - - - - + + + + + Edit 編輯 - - + + Edit %1 register 編輯 %1 暫存器 - + Edit FPU register 編輯 FPU 暫存器 - + ERROR CONVERTING TO HEX 轉至十六進位出錯 - + Set Last Error 設置上次錯誤 - + Set Last Status 設定最新狀態 - + Follow in &Dump 在資料視窗中跟隨(&D) - + Copy old value: %1 複製舊值：%1 - + Set Hardware Breakpoint on %1 在 %1 設定硬體中斷點 @@ -3880,261 +3859,292 @@ CommonActions - + Follow in Disassembler 在反組譯視窗中跟隨 - + Show this address in disassembler. Equivalent command "d address". - + &Follow DWORD in Disassembler 在反組譯視窗中跟隨 DWORD(&F) - + &Follow QWORD in Disassembler 在反組譯視窗中跟隨 QWORD(&F) - + Follow in Dump 在資料視窗中跟隨 - + Show the address in dump. Equivalent command "dump address". - + &Follow DWORD in Current Dump 在目前資料視窗中跟隨 DWORD(&F) - + &Follow QWORD in Current Dump 在目前資料視窗中跟隨 QWORD(&F) - + Dump %1 資料 %1 - + Follow DWORD in Dump 在資料視窗中跟隨 DWORD - + Follow QWORD in Dump 在資料視窗中跟隨 QWORD - + Follow in Stack 在堆疊中跟隨 - + Show this address in stack view. Equivalent command "sdump address". - + Follow in Memory Map 在記憶體映射中跟隨 - + Show this address in memory map view. Equivalent command "memmapdump address". - + Graph 圖形 - + Show the control flow graph of this function in CPU view. Equivalent command "graph address". - + + + Display type at %1 + + + + + Display a type at this address in the struct view. + + + + Toggle 切換 - - + + Edit 編輯 - - + + Set Hardware on Execution 設置硬體執行中斷點 - + Remove Hardware 移除硬體中斷點 - - - - + + + + Replace Slot %1 (Unknown) 更換硬體中斷點 %1 (未知) - + Breakpoint 中斷點 - + Set Conditional Breakpoint 設置條件中斷點 - + Replace Slot %1 (0x%2) 更換硬體中斷點 %1 (0x%2) - + Label Current Address 在目前位址設定標籤 - + Comment 註解 - + Toggle Bookmark 切換書籤 - + Set a bookmark here, or remove bookmark. Equivalent command "bookmarkset address"/"bookmarkdel address". - + Set %1 Here 在此設置%1 - + Set the next executed instruction to this address. Equivalent command "mov cip, address". - + Create New Thread Here 於此處建立新執行緒 - + Create a new thread at this address. Equivalent command "createthread address, argument". - + &Watch DWORD 監視 DWORD(&W) - + &Watch QWORD 監視 QWORD(&W) - + Add the address in the watch view. Equivalent command "AddWatch [address], "uint"". - + Cannot follow %1. Address is invalid. 無法轉到 %1。位址無效。 - + Add label at 新增標籤於 - + The label may be in use 標籤可能正在使用中 - + The label "%1" may be an existing label or a valid expression. Using such label might have undesired effects. Do you still want to continue? “%1”標籤可能是現有的標籤或有效的運算式。使用這種標籤可能會產生意外影響。您仍想使用該標籤嗎？ - - - + + + Error! 錯誤！ - + DbgSetLabelAt failed! DbgSetLabelAt 失敗！ - + Add comment at 新增註解於 - + DbgSetCommentAt failed! DbgSetCommentAt 失敗! - + DbgSetBookmarkAt failed! DbgSetBookmarkAt 失敗! - + Address %1 is not executable - + Setting software breakpoint here may result in crash. Do you really want to continue? 在此設置軟體中斷點可能導致崩潰。您真的還要繼續嗎？ - + + Error + 錯誤 + + + + No types loaded yet, parse a header first... + + + + + Type to display at %1 + + + + + Address to display %1 at + + + + Setting new origin here may result in crash. Do you really want to continue? 在此設置新的運行點可能導致崩潰。您真的還要繼續嗎？ - + Creating new thread here may result in crash. Do you really want to continue? 在此建立新執行緒可能導致程式崩潰. 確定要繼續嗎? - + Argument for the new thread 新執行緒的參數 @@ -4834,12 +4844,13 @@ - + + Actions 動作 @@ -5499,97 +5510,102 @@ + Display type + + + + Freeze the stack 鎖定堆疊 - + Go to Base of Stack Frame 轉到堆疊幀的底部 - + Go to Previous Stack Frame 轉到上一堆疊幀 - + Go to Next Stack Frame 轉到下一堆疊幀 - + Go to Previous Reference 轉到前一引用 - + Go to Next Reference 轉到後一引用 - + Modify value 修改值 - + Watch DWORD/QWORD - + Copy File Offset 複製檔案偏移量 - + Start/Stop trace recording 開始/停止追隨錄製 - + Copy -> Cropped Table 複製 -> 截斷的表格 - + Copy -> Table 複製 -> 整個表格 - + Copy -> Line, To Log 複製 -> 行，到日誌 - + Copy -> Cropped Table, To Log 複製 -> 截斷的表格，到日誌 - + Copy -> Table, To Log 複製 -> 整個表格，到日誌 - + Copy -> Export Table 複製 -> 滙出表格 - - - - - - - - - - - - + + + + + + + + + + + + NOT FOUND IN CONFIG! 在設定檔中未找到! @@ -6013,7 +6029,7 @@ - + Done! 完毕！ @@ -8248,28 +8264,28 @@ SizeofType 失敗 - + VisitType failed VisitType 失敗 - + RemoveType failed RemoveType 失敗 - + Type %s removed - + LoadTypes failed LoadTypes 失敗 - + Types loaded @@ -9604,162 +9620,162 @@ Do you want to continue debugging? StaticFileUnload 失敗 - + [PLUGIN] %s already loaded [外掛程式] %s 早已載入 - + [PLUGIN] Cannot find plugin: %s [外掛程式] 找不到外掛程式：%s - + [PLUGIN] Failed to load plugin: %s [外掛程式] 載入外掛程式失敗：%s - + [PLUGIN] Export "pluginit" not found in plugin: %s - + [PLUGIN] pluginit failed for plugin: %s - + [PLUGIN] %s is incompatible with this SDK version - + [PLUGIN] %s v%d Loaded! [外掛程式] %s v%d 已載入！ - + [PLUGIN] GuiMenuAdd(%d) failed for plugin: %s - + [PLUGIN] %s unloaded [外掛程式] %s 已卸載 - + [PLUGIN] %s not found [外掛程式] 找不到 %s - + [PLUGIN] Ignoring top-level plugin in favor of the directory 'plugins\%s' - + [PLUGIN] Invalid plugin handle %d... - + [PLUGIN, %s] Command "%s" failed to register... [外掛程式，%s]命令“%s”註冊失敗…… - + [PLUGIN, %s] Command "%s" registered! [外掛程式，%s]命令“%s”已註冊！ - + [PLUGIN, %s] Command "%s" unregistered! [外掛程式，%s]命令“%s”已刪除！ - + [PLUGIN, %s] Command "%s" failed to unregister... [外掛程式，%s]命令“%s”刪除失敗…… - - + + [PLUGIN, %s] Expression function "%s" failed to register... [外掛程式，%s]運算式函數“%s”註冊失敗…… - - + + [PLUGIN, %s] Expression function "%s" registered! [外掛程式，%s]運算式函數“%s”已註冊！ - + [PLUGIN, %s] Expression function "%s" unregistered! - + [PLUGIN, %s] Expression function "%s" failed to unregister... [外掛程式，%s]運算式函數“%s”刪除失敗…… - + [PLUGIN, %s] Format function "%s" failed to register... [外掛程式，%s]格式函數“%s”註冊失敗…… - + [PLUGIN, %s] Format function "%s" registered! [外掛程式，%s]格式函數“%s”已註冊！ - + [PLUGIN, %s] Format function "%s" unregistered! - + [PLUGIN, %s] Format function "%s" failed to unregister... [外掛程式，%s]格式函數“%s”刪除失敗…… @@ -9986,50 +10002,50 @@ Do you want to continue debugging? - + Failed to add %s %s; 未能添加 %s %s; - + Failed to add function %s %s() - + Failed to add enum %s - + Failed to add typedef %s %s; - + Failed to add member %s %s.%s; - + Failed to add enum member %s - + Failed to add return type %s.%s; - + Failed to add argument %s %s.%s; @@ -14305,7 +14321,7 @@ Do you want to apply these patches anyway? RegistersView - + AVX-512 isn't supported on this computer. @@ -15983,90 +15999,90 @@ The TEB can be used to get a lot of information on the process without calling W 值 - + &Follow address in Dump - + Follow value in Dump - + Follow value in Disassembler - - + + Change address 修改地址 - + Display type - - + + Load JSON 載入 JSON - - + + Parse header - + Remove 移除 - + Clear 清除 - + &Refresh 重新整理(&R) - + &Copy 複製(&C) - + Error 錯誤 - + No types loaded yet, parse a header first... - + Type to display - + Address to display %1 at - + JSON files (*.json);;All files (*.*) JSON 檔案 (*.json);;所有檔案 (*.*) - + Header files (*.h *.hpp);;All files (*.*)